Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 172. (Read 487800 times)

Is there a possibility to config in some place the email notification of innactivity in order to receive it in 10 min after for example, because I am receving it like 2 hours later

Hey just wanted to ask if this is normal?? -- I am new to MiningPoolHub, so i just wanted to know if my stuff is processing correctly/Mining Correctly     Can someone please help


 TRANSACTION HISTORY   ------->----I am Exchanging Zcoin to Etherium----
ID   Date   TX Type   Status   Payment Address   TX #   Block #   Amount
16522156   2017-11-08 11:43:10 (UTC)   Credit_AE   Unconfirmed         60032   0.00988424
16520632   2017-11-08 11:43:06 (UTC)   Credit_AE   Unconfirmed         60031   0.01072339
16519396   2017-11-08 11:24:24 (UTC)   Credit_AE   Unconfirmed         60030   0.00968691
16518220   2017-11-08 11:16:08 (UTC)   Credit_AE   Unconfirmed         60029   0.00855878
16516900   2017-11-08 10:52:28 (UTC)   Credit_AE   Unconfirmed         60028   0.00614545
16515833   2017-11-08 10:52:24 (UTC)   Credit_AE   Unconfirmed         60027   0.00624994
16514298   2017-11-08 10:13:29 (UTC)   Credit_AE   Unconfirmed         60026   0.01075263
16512961   2017-11-08 09:42:25 (UTC)   Credit_AE   Unconfirmed         60025   0.00911840
16511927   2017-11-08 09:42:20 (UTC)   Credit_AE   Unconfirmed         60024   0.00981865
16511131   2017-11-08 09:23:02 (UTC)   Debit_AE   Confirmed               n/a      0.08156833
16510375   2017-11-08 09:22:33 (UTC)   Credit_AE   Unconfirmed         60023   0.00926379
16509270   2017-11-08 09:22:29 (UTC)   Credit_AE   Unconfirmed         60022   0.01061458
16508074   2017-11-08 09:13:56 (UTC)   Credit_AE   Unconfirmed         60021   0.01101254
16506736   2017-11-08 08:33:45 (UTC)   Credit_AE   Unconfirmed         60020   0.00968431
16505618   2017-11-08 08:23:41 (UTC)   Credit_AE   Unconfirmed         60019   0.00842128
16504387   2017-11-08 07:42:39 (UTC)   Credit_AE   Unconfirmed         60018   0.00797541
16503187   2017-11-08 07:33:17 (UTC)   Credit_AE   Unconfirmed         60017   0.00926545
16501969   2017-11-08 07:12:13 (UTC)   Credit_AE   Unconfirmed         60016   0.00758129
16500666   2017-11-08 06:32:17 (UTC)   Credit_AE   Unconfirmed         60015   0.00737064
16499592   2017-11-08 06:32:14 (UTC)   Credit_AE   Unconfirmed         60014   0.00714832
16498023   2017-11-08 06:13:03 (UTC)   Credit_AE   Unconfirmed         60013   0.00943881
16497222   2017-11-08 06:13:00 (UTC)   Credit_AE   Unconfirmed         60012   0.00942262
16496020   2017-11-08 06:02:24 (UTC)   Credit_AE   Unconfirmed         60011   0.00859580
16495267   2017-11-08 05:46:46 (UTC)   Debit_AE   Confirmed               n/a      0.07871322
16494635   2017-11-08 05:46:11 (UTC)   Credit_AE   Unconfirmed         60010   0.01216942
16493450   2017-11-08 05:32:53 (UTC)   Credit_AE   Unconfirmed         60009   0.00914403
16492291   2017-11-08 05:22:53 (UTC)   Credit_AE   Unconfirmed         60008   0.01022541
16491093   2017-11-08 05:13:12 (UTC)   Credit_AE   Unconfirmed         60007   0.01018054
16489854   2017-11-08 05:02:12 (UTC)   Credit_AE   Unconfirmed         60006   0.00610247
16488652   2017-11-08 04:52:28 (UTC)   Credit_AE   Unconfirmed         60005   0.00612992

I also have this... Is this also normal? Does it take a long time to transfer? Why do i have so many unconfirmed transactions? Would this be better to exchange to Bitcoin?
ACCOUNT INFORMATION
You are mining at 0.9% pool fee and you are not donating.
XZC Account Balance
Confirmed   0.00000000
Unconfirmed   0.00000000
Confirmed for Auto Exchange   0.04018455
Unconfirmed for Auto Exchange   1.00235235   <--This Keeps going up please help       Anyone who reply/answers this post, Thank-you in advance!!!!

once in a while certain miners randomly will happen

[2017-11-08 16:36:37] Starting on stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581
[2017-11-08 16:36:37] NVML GPU monitoring enabled.
[2017-11-08 16:36:37] NVAPI GPU monitoring enabled.
[2017-11-08 16:36:37] 1 miner thread started, using 'lyra2z' algorithm.
[2017-11-08 16:36:38] API open to the network in read-only mode on port 4068
[2017-11-08 16:36:40] Failed to get extranonce1
[2017-11-08 16:36:41] Stratum subscribe answer id is not correct!
[2017-11-08 16:36:41] JSON-RPC call failed: (unknown reason)
[2017-11-08 16:36:41] ...retry after 30 seconds

sometimes quitting miner or a reboot fixes it but sometimes no matter what i do, it just wont connect.

Number 1 is correct.

Mathematically ideal, expected number is 100%. If it took more time than expected then it increases.
0 <-> 100 <-> infinite
Lucky <----> Unlucky
Lower the better.

Blocks page shows last 20 blocks so it may and may not reflect last hour, or last 24 hours or last 7 days luck.






Not sure at this moment. Pool usually add pools which is listed on bittrex or poloniex.




MultiPoolMiner doesn't rely on pool's multi auto switch configuration.





sending to exchange is paid by pool.
Sold in btc and buying other coin pays fee in rate of amount. This is unavoidable even you exchange manually.
Withdraw fee is also charged. This is paid per withdrawal request and not related to amount. Pool withdraw them when it exceeds certain amount to lower the withdrawal fee.
Also fee is paid in 1/n in this case. You pay much less than your manual exchanging.

We have to pay fee to exchange site whether we use auto exchange feature or not.

Usually you save much money if you exchange monero from auto exchange because monero's network fee is quite big that sending small amount is very harmful.
Pool sends them in bulk so pool auto exchange has fundamental advantage over manual exchanging in some cases.






Pool hopppers got more than their contribution before because they used vulnerability on calculating block based contribution (This is called PROP)

PPLNS is not just invented to punish pool hoppers, but to distribute fairly.
PPLNS considers time based share contribution so this does not affect normal miners. PPLNS is known to be the most fair method currently.




Pool usually open pool that is listed on bittrex or poloniex.





Do you see hashrate on pool? What commandline did you use?






About a day.






What coin was that?
If it's ETH and if you didn't send more than 0.1 ETH, then bittrex will not show your coin at all.

Let me know what coin you sent and your id.





Thanks I'll check.






Well actually the problem is that it worked well with previous genoil-ethminer.
There's several ethminer released from different dev with same name.
I added claymore miner option on FAQ page now.






Does it happening still? Zcoin had some error during hardfork block. It's resolved now.

been randomly getting this recently . . .

[2017-11-08 07:18:40] Starting on stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581
[2017-11-08 07:18:40] NVML GPU monitoring enabled.
[2017-11-08 07:18:40] NVAPI GPU monitoring enabled.
[2017-11-08 07:18:40] 6 miner threads started, using 'lyra2z' algorithm.
[2017-11-08 07:18:40] Failed to get extranonce1
[2017-11-08 07:18:40] Stratum subscribe answer id is not correct!
[2017-11-08 07:18:40] JSON-RPC call failed: (unknown reason)
[2017-11-08 07:18:40] ...retry after 30 seconds
[2017-11-08 07:18:41] API open to the network in read-only mode on port 4068
[2017-11-08 07:19:10] Failed to get extranonce1
[2017-11-08 07:19:10] Stratum subscribe answer id is not correct!
[2017-11-08 07:19:10] JSON-RPC call failed: (unknown reason)
[2017-11-08 07:19:10] ...retry after 30 seconds

other rigs works well some random after quitting n restrting miner, it goes back to normal, some just don't & keeps on going on & on.

suprnova works fine.

I really see "--farm-retries" and not with a d (just as I had it) in the code: https://github.com/ethereum-mining/ethminer/blob/master/ethminer/MinerAux.h#L138

And I got it from the batch file examples in the FAQ from miningpoolhub.com so I think the example is not working as described.

If it is not working maybe better change the example...

MPH, have you looked into adding BitcoinZ? It looks promising due to its decentralised nature. Could also work well with the rest of the equihash algos in multipool setup.

https://bitcointalksearch.org/topic/annbtcz-bitcoinz-low-fees-100-community-pow-equihash-no-premine-no-tax-2166510

That is why I said mining is not for everyone. When deciding to build and maintain a rig, people are expected to understand at least the basics in this area or expected to be at least willing to learn OR you can always accept to have a lesser income than what your rig is capable of and go with the Nicehash miner for dummies. There are other one-click-miners out there as well.

All sample.bat files are functional out of the box if you are happy to mine for the developer. How do you expect a program to know who you are and what you actually want to do with it without basic editing?

You don't need to add any workers, MiningPoolHub picks them up automatically (albeit with a delay but that doesn't cause any issues), however, they do need to be specified in any case when mining.

I withdraw my manual payout in miningpool hub since yesterday But i didnt receive the money in bittrex. Any help maybe it stock in the air.. but I saw its completed

Thanks
How long its takes usually?

after 130 confirms

Hi Guys
Im new to this pool

When i get my coins ? (0.5 zcoin)

Confirmed   0.00000000
Unconfirmed   0.50542130
Confirmed for Auto Exchange   0.00000000
Unconfirmed for Auto Exchange   0.00000000

My pays out stay at 0.1 Zcoin

Any body  ?

Create Account https://miningpoolhub.com / add worker

edit: startminingpoolhub.bat

1.change Username and WorkerName to yours

2.select how many gpu's you have eg: (1gpu ewbf 0 cc 0) (default 2 gpu ewbf 0 1 cc 0,1) (6gpu ewbf 0 1 2 3 4 5 cc 0,1,2,3,4,5)

3.remove any algos you do not want to mine (default all supported algos enabled)

4.there is a default 5minute per day fee, that can be disabled by changing -Donate 5 to -Donate 0

5.save changes and run startminingpoolhub.bat



it really is that simple... its working fine for me....
heres example of it running.. https://imgur.com/a/8wRPG

there is a example.bat  (startminingpoolhub.bat).... it will run without changing anything....

all you need to do is create a account and worker @ mining pool hub

then edit startminingpoolhub.bat change User name and worker name...   eg.  -Username nemo     -Workername miningpoolhub    another example   -Username bobs -Workername 1070s

save changes to startminingpoolhub.bat

then run startminingpoolhub.bat


i Assume you have already followed the instructions on my Main Thread Page 1

If you have Windows 7, please update PowerShell: https://www.microsoft.com/en-us/download/details.aspx?id=50395

CCMiner may need 'MSVCR120.dll' if you don't already have it: https://www.microsoft.com/en-gb/download/details.aspx?id=40784

CCMiner may need 'VCRUNTIME140.DLL' if you don't already have it: https://www.microsoft.com/en-us/download/details.aspx?id=48145

running multiple cards its recommended to increase Virtual Memory 32gb-64gb is optimal


Best Regards Nemo

Same here. Doesn't work. I appreciate all people who write / code these things but I cannot bite my tongue any longer. The instructions the come with most of these miners are absolutely atrocious. It's as if we are just supposed to magically know how to make them work. And even when there are instructions (at least this person attempted to list concise, step by step instructions) half the time those instructions are wrong.

For example: 1) Create Account https://miningpoolhub.com / add worker < Fair enough, but ADD WORKER WHERE??? In the "Hub" section? Under a certain coin? What?
Example 2) While the instructions do seem clear enough, please ALWAYS include a complete / functional sample.bat file. Everywhere there is a %USER% , am I supposed to put the username INSIDE the %--%? Or do I delete the % marks and just have the username? Also, do I need to do that in every line with every algo I want to mine??

The instructions make it seem so simple but after working with it for 30 minutes and not being able to get it to work, I gave up. All I'm asking coders / etc who put these miners together is to put together an instruction set that 1) Actually works, and 2) a FUNCTIONAL (not hypothetical) sample.bat file. I'd really like to try this miner but.....I don't have time "figure it out" when it doesn't work.

You do not need to use the autoswitch config with it. MPM does its own profit query and runs appropriate miner. So yes it would work on algo not listed as long as it is supported

hey guys
How are you!
I have a problem, I am mining ethereum 1 hs ago and no statistics appear in the pool!

what will be the problem?
I have installed the latest amd drivers 17.40 will this be the problem?



Thanks for the help

Then I didn't read it wrong, thanks for confirming. My worry was that the block finding stats showed the opposite but that might have been due to pool updating those stats slower.

Each point on the chart is a block, you will notice it skips numbers, so it does not show us blocks solved by other pools, otherwise it would have gaps in the chart.

If the Green is under the Blue, we are getting lucky, finding more blocks than typical.

You have some points accurate and some backwards. over 100% is unlucky, meaning we needed more shares(orange) to solve a block than was expected by the difficulty(blue).

All this does is compare shares we used, against shares it thought we would need. If we had 3 blocks that were fast, but 1 very slow block, that could result in us being unlucky for the hour, while the green line would dip under the blue for a little, but then come right back up.

1. did you read the (some pages at least) thread?
2. yes its not so transparent BUT
3. service costs money! you could do it yourself, it will cost you more fees if you dont have high trading volume
4. from auto exchange site: "Additional 0.2% Fee is applied. (Txfee for sending from Mining Pool Hub to exchange site is included in this fee)"
5. read the thread, some information was already posted