Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 176. (Read 487870 times)

I don't get it. I installed the MultipoolMiner on windows 7. Followed instructions. Updated shell, downloaded excavator etc. Followed all the rules, adjusted my bat file and launched it.

It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.

Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?

Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.

I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.  

http://[img][/img]

yes could add bitcoin gold  but i think that coin has no future, why the hell someone need this when there are already so many altcoins lol

Sad to hear that. It is easy to command and understand the instructions/tasks you give yourself when you are your own boss and it may seem waste of time to do same with other people when you have to talk to them, explain things to them, guide them, heck even teach them but don't make that fool you, it is worth it on the long run as you cannot do everything by yourself. Be patient. Good luck!

With bitcoin gold going to equihash, I'd hope that we add the other equihash coins to compliment zcash mining since lately zencash has een flip flopping between most profitable against ethereum for me.  I know this was in a to do list for the owner, but perhaps we can get this moved up a bit.

Sorry monero block's reward was calculated wrongly while I was updating monero to latest release.




Decreased fee after the hardfork because network became stable and capacity increased.





Yeah I'll add them after zencash.
Working some stuffs with zencash still.





Good to hear that mining is working.

What OS are you using?
"setx" or "set" should work for normal windows.





I'm working on with zencash still. Sorry for late.
The problem is that I have to recover zclassic balance from zencash to distribute missing balances for zclassic miners who held money in pool. I think it should be done before opening zencash.

There were some people who offered to help me but they did not make some outputs.
I recently hired two developer but it made waste my time more than before. I believe it will get better someday.







1. Yes.
2. Yes
3. Yes. You are right. Litecoin transaction fee is cheaper so Litecoin is recommended than Bitcoin in this case.
4. Pool does not provide detailed adjustment for each GPU.
Pool just shows an average for AMD and NVIDIA gpu groups. Norm profitability in green text column shows similar to whattomine.com

I regularly update gpu hashrate factor like whattomine.com but there could be some differences too because pool includes some historical mining statistics to minimize the difference between theory and reality.




Great!
You are now using djm34's latest build right?

I have found that sometime you have to change the "set" option to "setx", don't know why but sometimes "set" worked and sometimes "setx" (on different PCs).
So try this:


You can also put everything in the .bat file, like this:
[claymore ignores commands in the confg.txt file if they are already in the .bat file].
[there's something about it working better if you put the 'ssl://' bit in, but can't remmember just now]


More help here:
https://bitcointalksearch.org/topic/claymores-zcashbtg-amd-gpu-miner-v126-windowslinux-1670733

Thanks for everyone's help regarding Zcoin. I have been able to mine it with my 4x 1080Ti at 11MHs+ pool-side for the last 12h. I think I finally found the right version of ccminer :-) t

Bless you both. I will try and report back my findings. I have 4 more questions.
1) By setting the auto-exchange to Litecoin, that will automatically turn everything I mine into LTC, even if I'm not using the auto switch thing. Correct?
2) The reason I want to auto-exchange is because if I don't, I'll have to go through each wallet and do my transactions one by one. Correct?
3) The reason I want to use Litecoin vs Bitcoin as my coin of choice is to save $ on the FINAL transaction. Example: I mine for a few days using this auto switch profit thing, and it converts everything to LTC. Then I want to send that LTC to an exchange. From my experience, using LTC to send the transaction to my exchange of choice is a heck of a lot cheaper in US dollars than sending Bitcoin. Is my thinking correct on this?
4) Under the "COIN MINING STATUS AND PROFITS. SORTED FOR NVIDIA GPU" - I don't understand how this works. I am used to using whattomine website and I will typically change the parameters for average profit and average difficulty for the past 24 hrs and 3 days. From there it's pretty straight forward. I will mine the #1 coin on the list. I do not understand how the listing above works at all compared to whattomine. Can someone explain that? Thanks so much.

Hey Mr MPH,

What is the status of launching Zencash pool and the others? What is the hold-off? Have you managed to find help and what happened to that person who offered to help with the new pools?

I use dish drying racks (multi-level) that cost less then 10 quid from Amazon. Dirt cheap, works well with zip ties.

If you are using MultiPoolMiner, try this with your 1070 rig (replace the entire code in start.bat and of course, add your own details!)


I suspect it will also work well with your 1060 rig but I am not a 100% sure on that one, maybe someone else can confirm this.

There is also a quite extensive README you will definitely find helpful and I highly recommend reading it so you understand the config and its structure above! https://github.com/aaronsace/MultiPoolMiner/blob/master/README.txt

No, you don't have to set up a hub worker.
Yes, you need to set the auto-exchange feature to litecoin on MiningPoolHub.

...and please just quit begging.

Just open start.bat on MultiPoolMiner and you're done.

Hello. First let me say I love miningpoolhub. No sarcasm. I really love it. But I need some help.

I have 6x 1060's (6GB) and 6x1070's (8gb). They are on dedicated rigs.

I can set up individual coins to mine just fine. (although in a lot of cases, the instructions could be clearer for each coin)

However, for the life of me, I CANNOT understand the directions for auto switching to the most profitable coin / algo.
From the FAQ page, it sounds as though I need ccminer 2.2.2 from trvput (or whatever his name is) and I have that miner. I even use that miner on other pools. So I am familiar with the miner itself.

But if you look at the example of the ccminer .bat on the FAQ page, look closely at the list of algo's. It doesn't even include equihash and I know for a fact it mines equihash.

I tried "Multipool" miner that is also listed on the FAQ page and I couldn't even begin to understand how to set it up.

So, here I am. I am BEGGING someone to please help me. I'd like (whatever miner) to auto switch to the most profitable coin/algo and I would also like to have it "auto convert" whatever I mine into Litecoin.

I assume I have to set up a "hub worker?"
I also assume I have to select Litecoin in the "auto exchange" menu.

But beyond that, I am absolutely lost. PLEASE HELP ME. Copy and paste all your bat files if possible so I can see for myself.

I tried that and it gave me the below errors:

UNKNOWN OPTION setx
UNKNOWN OPTION GPU_FORCE_64BIT_PTR 1
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_MAX_HEAP_SIZE 100
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS 1
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT 100
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT 100

You can change the SET to SETX and test if that works.

Yeah, noticed that, too. You need to run the resetprofit.bat file or just stay a millionaire.

What is your username? You should input your actual username.workername at USER.RIG1

e.g.) If your username is hello, input like hello.rig1


[/quote]

I figured out the issue with my username.  Now it only shows up at the start then starts mining properly.  However the set errors are still occuring and I am unsure why.  Additionally, I am ordering everything for my first mining rig and have ordered 3 Vega 56 GPUs.  The only part I haven't ordered so far is the frame and I was curious if anyone has any insight as to what frame I should buy.
 this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s.  The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product

Hey there,

New coin pool ideas...

As said Zencash would be great and so would BTG when it becomes available  I suppose you are probably already working on those.

Now, I know you are real busy, but how about some more X11.  Two real popular ones are
Cannabiscoin CANN

and
ONIX Coin    ONX

they both trade on Yobit and CANN on Bittrex too.

Hi, did miningpoolhub just decreased their ETH payout TX fee from 0.001 > 0.0005?

something wrong with monero earning and multipool

Miner                   BTC                                          EUR
-----                   ---                                          ---
MultiPoolMiner          1,08207 ±2.519 % (0,04131-28,34395)          5.442,2...
ClaymoreAmd-Cryptonight 137,90458 ±328.381 % (0,04198-452.990,09942) 693.586...

not just on 1 computer it s on all of them