HELLOOOOOOOOO!!!!! repost!
Can someone help me reset my PIN on the HUB? I'm not receiving the email for the new PIN. It's not being sent. I've checked trash folder, spam folder, reject folder, everything. No email from the HUB.
If technical support is not provided on this website (for MiningPoolHub)...then where is it?
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 175. (Read 487800 times)
October 30, 2017, 05:50:06 PM
October 30, 2017, 05:41:01 PM
Could you please anyone could share what is the D3 antminer (X11) daily profit at Mining Pool Hub.
according to Nicehash , D3 profit is 6-7 $ so this mean it is almost be garbage before arrives.
according to Nicehash , D3 profit is 6-7 $ so this mean it is almost be garbage before arrives.
You could check the profits made from the Antminer D3 by using Whattomine, but unless you get free electricity it does not look good for mining x11.
Here is a link to Dash profit calculation and for and Antminer D3 with, say $0.15 per kW/h, it would take well over a year to break even.
http://whattomine.com/coins/34-dash-x11?utf8=%E2%9C%93&hr=15000.0&p=1200.0&fee=0.9&cost=0.15&hcost=0.0&commit=Calculate
October 30, 2017, 04:45:00 PM
Could you please anyone could share what is the D3 antminer (X11) daily profit at Mining Pool Hub.
according to Nicehash , D3 profit is 6-7 $ so this mean it is almost be garbage before arrives.
according to Nicehash , D3 profit is 6-7 $ so this mean it is almost be garbage before arrives.
October 30, 2017, 04:20:51 PM
Can someone help me reset my PIN on the HUB? I'm not receiving the email for the new PIN. It's not being sent. I've checked trash folder, spam folder, reject folder, everything. No email from the HUB.
October 30, 2017, 11:58:26 AM
Is there a way to see shares submitted for past blocks?
The api seems to show only basic stuff like the dashboard screen.
Second question,
Anyone mining zcoin with amd 570/580 cards? I'd like to know the hashrate and power consumption numbers if possible, or if someone could run a quick benchmark please!!! (I can just order one from amazon prime and return it for free if needed)
The api seems to show only basic stuff like the dashboard screen.
Second question,
Anyone mining zcoin with amd 570/580 cards? I'd like to know the hashrate and power consumption numbers if possible, or if someone could run a quick benchmark please!!! (I can just order one from amazon prime and return it for free if needed)
October 30, 2017, 04:27:41 AM
I can confirm there is an issue with Sia pool initially when Claymore Dual is launched but fixes itself within a minute or so.
Code:
SC: Stratum - Connected (europe.hub.miningpoolhub.com:20550)
SC: Received unknown response: {"id":null,"method":"mining.notify","params":["41dd","0x6b6564206265666f726520
69742063616e2062652075736564227d0a","0x0000000012533fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]
}
SC: Authorized
October 29, 2017, 10:37:25 PM
I figured out the issue with my username. Now it only shows up at the start then starts mining properly. However the set errors are still occuring and I am unsure why. Additionally, I am ordering everything for my first mining rig and have ordered 3 Vega 56 GPUs. The only part I haven't ordered so far is the frame and I was curious if anyone has any insight as to what frame I should buy.
this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s. The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product
this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s. The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product
Good to hear that mining is working.
What OS are you using?
"setx" or "set" should work for normal windows.
I am currently you running on Windows 7 64-bit. Does that affect it?
October 29, 2017, 08:53:44 PM
I have 170mhs of hashrate but miningpoolhub shows 105mhs IS THIS EVEN POSSIBLE almost half?
I have a similar issue, the miner shows 11.13 Mhs/s which according to the sum of khs for each card is correct,but the dashboard shows 8 khs/s almost all day, I am mining zcoin... is there an error in the pool orwhy happend this? October 29, 2017, 05:39:32 PM
I have 170mhs of hashrate but miningpoolhub shows 105mhs IS THIS EVEN POSSIBLE almost half?
October 29, 2017, 03:44:59 PM
Mr MPH,
Can you make a page that lists all active miners of the user, the algo they are on, their speed, valid and invalid shares for each so we can track them easier? I think this has been asked before. Nothing fancy, a simple borderless table would do.
Can you make a page that lists all active miners of the user, the algo they are on, their speed, valid and invalid shares for each so we can track them easier? I think this has been asked before. Nothing fancy, a simple borderless table would do.
October 29, 2017, 08:32:23 AM
I don't get it. I installed the MultipoolMiner on windows 7. Followed instructions. Updated shell, downloaded excavator etc. Followed all the rules, adjusted my bat file and launched it.
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
[/img]
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
Just to confirm whether it is your machine or not, try to transfer over the MPM folder you already used and see if it works. You can run the resetprofit.bat and resetbenchmark.bat to start fresh with it on the new machine. Let us know if it works that way.
Hey fonyo. I can't get to it today but I did want to thank you and the other guy for really sticking with me through this. Fonyo, I was having some sort of "DNS" error inside the cmd screen, and I was able to copy and paste the dns error into google, and I found YOUR post on github , about the same miner, and you simply stated the error, no one helped you, you said you had deleted (portions of?) Excavator, and that you had "figured it out." (The DNS error) Could you share with me what you did to fix that?
Also, about windows 8.1..... ummm....lets just say I got a good deal on it.
and it's working just fine for dedicated mining rigs, and I don't really feel the need to upgrade to win 10. Unless there is some unbelievable performance increase, I can't really see it being worth it to me to upgrade to 10. Advise...??One last thing for the evening, if I copy / paste the mining folder as you suggest, I will be copying from Windows 7 (my personal main machine) to 8.1 (the rigs) will that matter at all? I understand exactly what you're saying though. Copy / paste, and try it. And just for full disclosure, I'm on win 7 on my main pc because I tried upgrading to windows 10, and I loved it, but the hardware I am running ON MY PERSONAL MACHINE is too old for Win 10, and everytime I tried to overclock my system, Win 10 didn't like it. At all. Lol. But on my rigs, I'm running MODERN equipment. Modern everything on the rigs.
Cheers matey, I appreciate the kind words.
As Carlo stated, head over to the Miners folder and locate all the Excavator config files and just simply delete them (this way MPM won't even look for that miner). I may also add, it is not a great miner anyway, you will not be missing out on much without it. You will also find this and more relevant information in the FAQ section of the README. I wrote it for a reason!
Well, if Win10 doesn't work for you, then your decision is right. Coincidentally, I upgraded my main Win7 workstation yesterday and apart from one hiccup (ICS was causing high CPU load due to failing to start properly) it is now working great. I upgraded because my Win7 install was over 5 years old and a bit cluttered and wanted to start fresh without the hassle of reinstalling everything and there will be great updates and new features coming to Win10 that benefit my work.
Yes, just simply copy the whole folder over. Not sure what Powershell version Win8.1 comes with so you may want to update it to the latest V5 regardless, it won't hurt for sure.
Let me know how things go once you get round to it.
October 28, 2017, 10:50:01 PM
------------>>>Another vote for ZenCash!<<<------------
Great mining pool!! Thanks!!
Great mining pool!! Thanks!!
October 28, 2017, 08:38:50 PM
just remove Excavator from miner folder you don't need it anyway
October 28, 2017, 04:56:28 PM
I don't get it. I installed the MultipoolMiner on windows 7. Followed instructions. Updated shell, downloaded excavator etc. Followed all the rules, adjusted my bat file and launched it.
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
http://[img][/img]
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
http://[img][/img]
Just to confirm whether it is your machine or not, try to transfer over the MPM folder you already used and see if it works. You can run the resetprofit.bat and resetbenchmark.bat to start fresh with it on the new machine. Let us know if it works that way.
Hey fonyo. I can't get to it today but I did want to thank you and the other guy for really sticking with me through this. Fonyo, I was having some sort of "DNS" error inside the cmd screen, and I was able to copy and paste the dns error into google, and I found YOUR post on github , about the same miner, and you simply stated the error, no one helped you, you said you had deleted (portions of?) Excavator, and that you had "figured it out." (The DNS error) Could you share with me what you did to fix that?
Also, about windows 8.1..... ummm....lets just say I got a good deal on it.
and it's working just fine for dedicated mining rigs, and I don't really feel the need to upgrade to win 10. Unless there is some unbelievable performance increase, I can't really see it being worth it to me to upgrade to 10. Advise...??One last thing for the evening, if I copy / paste the mining folder as you suggest, I will be copying from Windows 7 (my personal main machine) to 8.1 (the rigs) will that matter at all? I understand exactly what you're saying though. Copy / paste, and try it. And just for full disclosure, I'm on win 7 on my main pc because I tried upgrading to windows 10, and I loved it, but the hardware I am running ON MY PERSONAL MACHINE is too old for Win 10, and everytime I tried to overclock my system, Win 10 didn't like it. At all. Lol. But on my rigs, I'm running MODERN equipment. Modern everything on the rigs.
October 28, 2017, 02:48:16 PM
Is the VertCoin pool working? I get an error "empty response from server" when ccminer tries to connect.
October 28, 2017, 08:59:05 AM
Yes, using the ccminer_cuda9.exe from here https://github.com/djm34/ccminer-msvc2015/releases/
October 28, 2017, 08:45:42 AM
I don't get it. I installed the MultipoolMiner on windows 7. Followed instructions. Updated shell, downloaded excavator etc. Followed all the rules, adjusted my bat file and launched it.
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
[/img]
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
Just to confirm whether it is your machine or not, try to transfer over the MPM folder you already used and see if it works. You can run the resetprofit.bat and resetbenchmark.bat to start fresh with it on the new machine. Let us know if it works that way.
October 28, 2017, 08:41:24 AM
I don't get it. I installed the MultipoolMiner on windows 7. Followed instructions. Updated shell, downloaded excavator etc. Followed all the rules, adjusted my bat file and launched it.
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
It's just a PowerShell script, it's on nearly every windows machine in the world. I don't recall anyone mentioning that it can't find the file.
On a side note, you didn't update 8.1 to 10
You can still do for free until the end of the year.
October 28, 2017, 08:15:19 AM
I don't get it. I installed the MultipoolMiner on windows 7. Followed instructions. Updated shell, downloaded excavator etc. Followed all the rules, adjusted my bat file and launched it.
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
It seems to be working but I can't really tell. I kept seeing a bunch of red text talking about ExcavatorNidia4.ps1 so I deleted that file. Then the same file but this time it was #2. Then had to delete the regular Excavator4.ps1 and Excavator2.ps1 and sine then, I have seen no more red lines in the cmd prompt.
Also, I don't know if the benchmarks have completed??! Will there be some kind of message saying benchmark complete?
Now heres the best part. I did a fresh download of MPM, Excavator and transferred them over to my dedicated rig. I didn't unzip them. First, I uploaded the power shell as per the instructions, even though my rigs are on Windows 8.1. I put the excavator exe into the newly created excavator folder......adjusted the bat file and ran as admin.
I claims it cannot find .\multipoolminer.ps1 even though its in the exact same folder as the start .bat.
It's just a PowerShell script; PowerShell is on nearly every windows machine in the world. I don't recall anyone mentioning that it can't find the file.
On a side note, you didn't update 8.1 to 10
October 28, 2017, 04:32:04 AM
Another vote for ZENcash...may be breaking all the request records! And while we're on Equihash, Hush I believe was on your to-do list as well.
I kind of wish you focused on 5-6 algorithms (Equihash, Ethash, Lyra2RE2, Cryptonight...maybe 1-2 more) instead of having to deal 15+ different ones that I'm sure give more trouble than people used them...but you must have your reasons and stats to back things up.
Keep up the good work.
I kind of wish you focused on 5-6 algorithms (Equihash, Ethash, Lyra2RE2, Cryptonight...maybe 1-2 more) instead of having to deal 15+ different ones that I'm sure give more trouble than people used them...but you must have your reasons and stats to back things up.
Keep up the good work.
Jump to: