Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 177. (Read 487800 times)

Is there anyway to set your own fixed strantum diff level on Lyra2z. I am getting a solid 18.5 Mhz on my miner yet on your site it is constantly varying between 12 (most of time around 12) Mhz and spikes to 18 Mhz and that is due to the diff level constantly being adjusted to high.

Many Thanks, because this is the only pool that does this Algo, id prefer to fix it here than move elsewhere.

And thank you for answering my maxcoin issue. I turned auto exchange off as its faster I transfer coins manually to an exchange and perform the action. Its still a handy feature to have there just in case however.

I second notion for Zen, in fact it would be nice to have all equihash coins added at some point.


2017-10-20 19:46:34] accepted: 125/125 (diff 0.063), 18.55 MH/s yes!
[2017-10-20 19:46:36] GPU #1: GeForce GTX 1080 Ti, 3181.37 kH/s
[2017-10-20 19:46:36] GPU #3: GeForce GTX 1080 Ti, 3211.42 kH/s
[2017-10-20 19:46:36] GPU #4: Gigabyte GTX 1080, 2332.96 kH/s
[2017-10-20 19:46:37] GPU #5: GeForce GTX 1080 Ti, 3210.13 kH/s
[2017-10-20 19:46:37] GPU #2: GeForce GTX 1080 Ti, 3213.28 kH/s
[2017-10-20 19:46:38] GPU #0: GeForce GTX 1080 Ti, 3296.99 kH/s
[2017-10-20 19:46:38] accepted: 126/126 (diff 0.077), 18.54 MH/s yes!
[2017-10-20 19:46:52] GPU #5: GeForce GTX 1080 Ti, 3269.53 kH/s
[2017-10-20 19:46:52] accepted: 127/127 (diff 1.634), 18.54 MH/s yes!
[2017-10-20 19:46:54] GPU #2: GeForce GTX 1080 Ti, 3263.17 kH/s
[2017-10-20 19:46:54] accepted: 128/128 (diff 0.121), 18.54 MH/s yes!
[2017-10-20 19:47:08] GPU #1: GeForce GTX 1080 Ti, 3251.92 kH/s
[2017-10-20 19:47:08] accepted: 129/129 (diff 1.247), 18.54 MH/s yes!
[2017-10-20 19:47:34] GPU #1: GeForce GTX 1080 Ti, 3256.41 kH/s
[2017-10-20 19:47:35] accepted: 130/130 (diff 0.129), 18.54 MH/s yes!
[2017-10-20 19:47:40] GPU #0: GeForce GTX 1080 Ti, 3285.59 kH/s
[2017-10-20 19:47:40] accepted: 131/131 (diff 0.073), 18.55 MH/s yes!
[2017-10-20 19:47:41] GPU #3: GeForce GTX 1080 Ti, 3272.75 kH/s
[2017-10-20 19:47:41] GPU #4: Gigabyte GTX 1080, 2373.42 kH/s
[2017-10-20 19:47:45] GPU #0: GeForce GTX 1080 Ti, 3291.74 kH/s
[2017-10-20 19:47:46] accepted: 132/132 (diff 0.146), 18.55 MH/s yes!
[2017-10-20 19:47:51] Stratum difficulty set to 22.0497 (0.08613)
[2017-10-20 19:47:52] GPU #5: GeForce GTX 1080 Ti, 3273.28 kH/s
[2017-10-20 19:47:54] GPU #2: GeForce GTX 1080 Ti, 3279.23 kH/s
[2017-10-20 19:48:06] GPU #3: GeForce GTX 1080 Ti, 3268.81 kH/s
[2017-10-20 19:48:06] accepted: 133/133 (diff 0.426), 18.55 MH/s yes!
[2017-10-20 19:48:14] GPU #2: GeForce GTX 1080 Ti, 3189.95 kH/s
[2017-10-20 19:48:14] accepted: 134/134 (diff 0.098), 18.55 MH/s yes!
[2017-10-20 19:48:36] GPU #1: GeForce GTX 1080 Ti, 3178.34 kH/s
[2017-10-20 19:48:42] GPU #4: Gigabyte GTX 1080, 2344.84 kH/s
[2017-10-20 19:48:46] GPU #5: GeForce GTX 1080 Ti, 3234.25 kH/s
[2017-10-20 19:48:46] accepted: 135/135 (diff 0.102), 18.54 MH/s yes!
[2017-10-20 19:48:52] GPU #0: GeForce GTX 1080 Ti, 3238.06 kH/s
[2017-10-20 19:49:07] GPU #3: GeForce GTX 1080 Ti, 3222.95 kH/s
[2017-10-20 19:49:13] GPU #2: GeForce GTX 1080 Ti, 3270.97 kH/s
[2017-10-20 19:49:33] GPU #1: GeForce GTX 1080 Ti, 3230.56 kH/s
[2017-10-20 19:49:33] accepted: 136/136 (diff 0.239), 18.54 MH/s yes!
[2017-10-20 19:49:41] GPU #4: Gigabyte GTX 1080, 2367.39 kH/s
[2017-10-20 19:49:46] GPU #5: GeForce GTX 1080 Ti, 3270.41 kH/s
[2017-10-20 19:49:58] GPU #0: GeForce GTX 1080 Ti, 3273.59 kH/s
[2017-10-20 19:50:06] GPU #3: GeForce GTX 1080 Ti, 3272.66 kH/s
[2017-10-20 19:50:14] GPU #2: GeForce GTX 1080 Ti, 3228.81 kH/s
[2017-10-20 19:50:26] GPU #4: Gigabyte GTX 1080, 2333.87 kH/s
[2017-10-20 19:50:26] accepted: 137/137 (diff 1.057), 18.54 MH/s yes!
[2017-10-20 19:50:35] GPU #1: GeForce GTX 1080 Ti, 3164.36 kH/s
[2017-10-20 19:50:47] GPU #5: GeForce GTX 1080 Ti, 3200.25 kH/s
[2017-10-20 19:50:47] GPU #3: GeForce GTX 1080 Ti, 3185.98 kH/s
[2017-10-20 19:50:47] accepted: 138/138 (diff 0.377), 18.54 MH/s yes!
[2017-10-20 19:51:03] GPU #2: GeForce GTX 1080 Ti, 3253.40 kH/s
[2017-10-20 19:51:03] accepted: 139/139 (diff 0.953), 18.54 MH/s yes!
[2017-10-20 19:51:05] GPU #0: GeForce GTX 1080 Ti, 3202.91 kH/s


your site always hovers on 12Mhz

Hashrate
12.68

sometimes i see this

 SC: Stratum - Connected (europe.hub.miningpoolhub.com:20550)
 SC: Received unknown response: {"id":null,"method":"mining.notify","params":["6
0d","0x6b6564206265666f72652069742063616e2062652075736564227d0a","0x000000001253
3fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}

Hi please the administrator of the pool can post the link to unlock an account because the message said that some instructions will be send to my email but until now I didnt receive nothing? Please admin can you help me with this?

Hello, i have unconfirmed transactions for ZCoin starting from 2017-10-22 10:31:55 (UTC). It`s been several hours and still not confirmed. Sshot attached. Dont know is it normal to be this long?

Hello all, I have a problem with wallet management, I already added PAYMENT ADDRESS and PAYOUT TO section is still Gray with no info. When I'm trying to Cash out im receiving a message: You have no payout address set.
What am I doing wrong?

Thanks

Will you add BTG soon after the fork?

Greetings!

Myriadcoin has released a new upgrade:

https://www.reddit.com/r/myriadcoin/comments/77mtcj/myriadcoin_01420/

Please update your mining nodes.

Thanks!

Mr MPH,

Have you found an alternative solution yet to provide a live API instead of the cloudflare cached one? Please do. Thanks.

I tried today mining on hub.miningpoolhub.com with Sgminer 5.5
But all I get is
most likely you put wrong URL, forgot to add port, or have not setup a worker.

And I have this in config file and ports are opened.

{
"pools" : [
{
"poolname" : "neoscrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12012",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "neoscrypt"
},
{
"poolname" : "x15",
"url" : "stratum+tcp://hub.miningpoolhub.com:12009",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "bitblock"
},
{
"poolname" : "x13",
"url" : "stratum+tcp://hub.miningpoolhub.com:12008",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "marucoin-mod"
},
{
"poolname" : "x11",
"url" : "stratum+tcp://hub.miningpoolhub.com:12007",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "darkcoin-mod"
},
{
"poolname" : "myriadcoin-groestl",
"url" : "stratum+tcp://hub.miningpoolhub.com:12005",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "myriadcoin-groestl"
},
{
"poolname" : "keccak",
"url" : "stratum+tcp://hub.miningpoolhub.com:12003",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "maxcoin"
},
{
"poolname" : "scrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12001",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "10"
},
{
"poolname" : "scryptn",
"url" : "stratum+tcp://hub.miningpoolhub.com:12002",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "11"
}
],
"failover-only" : true,
"failover-switch-delay" : "30",
"queue" : "0"
}

problem on zcoin pool ? getting half haterate

Hi everybody. Is this pool also for people with an Antminer L3+? And is there a server in the EU? IProhashing is dead and nicehash is giving to low return on Scrypt so i am really  looking for a good multi switch European mining pool close to Holland.

You would be a great help pointing me to 1 (or 2 to choose) I tried mining-duth but they mine unsellabe coins so there is no profit. Prohashing gives to much stale shares. So i am really looking for alternatives.

Thanks

need ZEN pool  faster

Does anyone have any tips to help me improve my returns ? Can anyone check my math?

Here are my stats:
https://imgur.com/a/Olkf7

I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock (257 MHs)

This should net me around 3 MONA coins for 24h according to mining calculator https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

So far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.

I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.

What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).

I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.

What can I do to improve my returns ?

Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Hi!

A required update for Myriadcoin has been released:

https://www.reddit.com/r/myriadcoin/comments/78wjp4/myriadcoin_01421/

We found a critical consensus issue.

Kind Regards,

I moved the lines from config.txt to Start.bat.  Now when it starts up it displays the following:

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_FORCE_64BIT_PTR 1
Environment variable GPU_FORCE_64BIT_PTR 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_HEAP_SIZE 100
Environment variable GPU_MAX_HEAP_SIZE 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_USE_SYNC_OBJECTS 1
Environment variable GPU_USE_SYNC_OBJECTS 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_ALLOC_PERCENT 100
Environment variable GPU_MAX_ALLOC_PERCENT 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_SINGLE_ALLOC_PERCENT 100
Environment variable GPU_SINGLE_ALLOC_PERCENT 100 not defined

Also, I am still receiving the same error after putting my poolhubmining user name in place of user and my worker name in place of Rig1.  I included the password even though the site says it doesn't check it.

I am at a loss as to what I am doing wrong.

Remove those lines from config.txt and add them to start.bat

Config.txt should look something like

change user to your own user name

You're not getting 257 MHs on the pool; you are even droping off at some points.

MiningPoolHub can look into it if you are sure that it is running without error the whole time.
Provide the link to the CCMiner binary that you are using and the command options. Also, try a different CCMiner on your machine.

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6

Hi everybody. Is this pool also for people with an Antminer L3+? And is there a server in the EU? IProhashing is dead and nicehash is giving to low return on Scrypt so i am really  looking for a good multi switch European mining pool close to Holland.

You would be a great help pointing me to 1 (or 2 to choose) I tried mining-duth but they mine unsellabe coins so there is no profit. Prohashing gives to much stale shares. So i am really looking for alternatives.

Thanks

Nobody helps here 

Does anyone have any tips to help me improve my returns ? Can anyone check my math?

Here are my stats:
https://imgur.com/a/Olkf7

I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock (257 MHs)

This should net me around 3 MONA coins for 24h according to mining calculator https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

So far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.

I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.

What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).

I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.

What can I do to improve my returns ?

Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?