[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 253.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: pornluver on April 24, 2017, 11:04:10 PM

Quote from: spacec on April 24, 2017, 11:50:13 AM

Quote from: pornluver on April 24, 2017, 10:46:25 AM

How much will autoexchange cost?

And how much time it would take?

It doesn't cost anything.

I mean total "effective" costs

For example, if you exchange ethereum to bitcoin and then to ethereum again you will get a bit less right? That's because you pay buying price and sell at selling price.

I wonder how much that would be?

Divide that by 2. That's your cost plus transaction fee.

Please add diamond coin on miningpoolhub. It's doing well there

http://whattomine.com/

Decred(DCR)
(Blake)
Zdash
Zdash(ZDASH)
Equihash
Digibytelogo
DGB-Groestl(DGB)
Groestl

DCR will be added.

Digibyte and Groestlcoin is already listed.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: minerx117 on April 24, 2017, 08:42:54 PM

NemosMiner-v1.7.1-MPH uploaded update to:

https://bitcointalksearch.org/topic/nemosminer-multi-algo-profit-switching-nvidiacpu-miner-1777336

Tanguy ccminer v2.0 RC3: groestl
small changes to .bat

Regards
Nemo

Great I'll check.
Thanks!

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: BorginBitsnTits on April 24, 2017, 06:39:47 PM

Please address the issues going on. Something went wrong and litecoin was shut off for a bit, i had no credits to xmr, ltc, or game credits while auto switching.. I also dont get why it keeps mining myr with the polinex boot surely it cant still be most profit coin when losing so much of its market?

Auto switching doesn't switch to litecoin.

What auto switch are you using?

myr is gpu
xmr is cpu/gpu
gamecredits and litecoin is scrypt asic.

There were no problem from pool side lately. Please tell me your id and info about issue.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: celofan on April 24, 2017, 12:03:53 PM

Quote from: miningpoolhub on April 24, 2017, 02:45:23 AM

Quote from: celofan on April 22, 2017, 01:22:56 PM

Quote from: aaronsace on April 22, 2017, 12:19:09 PM

Quote from: celofan on April 22, 2017, 10:06:19 AM

Anyone knows does autoexchange for musicoin works on miningpoolhub?

It should be; it's using Bittrex exchange.

No any autoexchange for musicoin since open musicoin pool for me.
Looks very strange.
And what i must do vs 45 maxcoins and some vcash coin?
No any autoexchange very long time, so can i delete it or exchange it manually?

You need to manually exchange maxcoin and vcash.

Currently vcash pool and wallet is down due to vcash fork bug.
I'll run vcash wallet and payout if you want.

I want exchange maxcoin and vcash, but i can't.
Any known exchange that support maxcoin not give me open new wallet or deposit, and i can't withdraw coins.
If you can help me, please, tell me what i must do for it.

You can deposit MAX at bleutrade
(1) Log in
(2) https://bleutrade.com/member/my_wallet
(3) search maxcoin
(4) click + button of maxcoin row
(5) Click Deposit

You will see maxcoin deposit address.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: pornluver on April 24, 2017, 10:46:25 AM

How much will autoexchange cost?

And how much time it would take?

0.2% additional fee is charged.
https://miningpoolhub.com/?page=account&action=autoexchange
tx fee from pool to exchange is included in this fee.

Also pool's bid/ask spread, exchange fee, withdrawal fee is unavoidable fee from exchange sites.

Pool tries to minimize the withdrawal fee by aggregating coins and withdraw at certain interval, not withdrawing small portion of coins frequently.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: dance on April 24, 2017, 07:59:36 AM

Almost no zcash were credited for last 3 days, though hashrate graph shows stable mining.

3 days of no credit?
What is your id? And what is your average hashrate?
I'll check.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: christiano88 on April 24, 2017, 07:55:51 AM

Please add email notification for low speed that could indicate a card that stopped working. To eliminate possibility of fake alerts (due to fluctuations based on miner dev fee), it could be something based on an avg calculated for 1-2h for example, for which we set a speed threshold (for example, I set 135mh/s eth for a 5card system which usually pulls 144mh/s eth, and if for 1h, the avg is under that, bang, email). While we will get a notification a bit late, at least we get one. Been using your pool for all my clients and so far, it's the best regarding payout and features (especially the auto-exchange which in my opinion is a gem, superior to nicehash even if the exchange is not instant, at a lower fee also). When you will add DCR like mentioned on twitter, it will be even better.
Until now I have been using one miner instance/card to be able to get email notification, but this requires better processors in systems, and updating miner software and/or settings are a pain for 5x mining software/system.

Keep up the good work!

thank you for precious suggestions.
I'll check monitor configuration. It's quite hard to balance it because some miners want quicker alarm.
Maybe using some other tools from client would be better to detect each card status.

DCR will be added soon. I hope you mine DCR from other pools for now.

miningpoolhub

legendary

Activity: 1456

Merit: 1006

Mining Pool Hub

Quote from: DrX on April 24, 2017, 04:39:09 AM

Something wrong with zcash pool?

Last Block found 22/04 23:31:52 (UTC)

Nope. Just hashrate dropped and found blocks rarely.
Seems hashrate coming up again these days.

Xardas2014

hero member

Activity: 635

Merit: 500

My point was that whattomine us rarely correct. MPH monitors stats on all coins real-time.

blimeyfool

newbie

Activity: 10

Merit: 0

Quote from: blimeyfool on April 28, 2017, 12:56:07 PM

Quote from: Xardas2014 on April 28, 2017, 10:01:28 AM

Quote from: blimeyfool on April 28, 2017, 08:29:53 AM

Quote from: Smokeyw on April 27, 2017, 05:59:22 PM

when do you add Ubiq Huh

since musicoin is added so fast i hope this one finaly get added too
and i hate it to mine on a other site just for one coin

My +1 post was deleted, but here's another vote for Ubiq. Ethash is the most profitable algorithm for me and Ubiq pops to the top of the most profitable coins from time to time. I'm not sure how hard it is to add another coin, but it would be most appreciated.

Cryptonight and Equihash are the next most profitable, so all of the other coins on those algorithms would be my next vote: KRB, ZDASH, KMD, BIP, XDN, etc.

Thanks for a great pool!

Mining a coin when it pops to the top of whattomine isn't always your best option. Most people don't even look to see what the coin is actually paying, they just see what is on top and start mining it. Example:

Ethereum(ETH)
Ethash
BT: 15.23s
BR: 4.85
LB: 3,615,603
321,761,623M
21.12 Th/s
2.0%
0.2768
0.2823
0.04911001
(Poloniex)
3.0%
$5,778,184,019
68,987.72 BTC   0.01359<----------------------------currently paying
0.01386   $17.90
$16.54   100% | 100%
100% | 100%
Exp2
Expanse(EXP)
Ethash
BT: 1m 28s
BR: 8.00
LB: 598,246
7,470,836M
84.90 Gh/s
-7.6%
19.6141
18.1184
0.00070841
(Poloniex)
-2.3%
$6,363,175
167.96 BTC   0.01389<----------------------------currently paying more
0.01284   $16.57
$15.22   102% | 93%
89% | 91%

Sorry the site fucks up the formatting, but as you can see ETH is on top, but EXP is actually paying more. It is also more profitable to be mining coins where the diff has dropped, instead of what is simply listed on top. It takes time to mine coins, so mining the top coin NOW might not be very profitable by the time you actually get the coins.

Well, whether you want to use the auto switching pool or manually switch depending on your own criteria, we need the coin to be available on the pool to even have the option of mining that coin.

BTW, whenever I refresh the site, the top revenue is always on top for me. Maybe there is some way to sort it.

I agree with you, but I guess it is a matter of time and complexity. Ideally, we would mine whatever is at the lowest difficulty to get the most coins, then hold them until the exchange rate is favorable and exchange them then. I used to basically do that on another pool before. Every day or so, I would see what was best to mine, then hold it until there was enough to deal with the exchange and transfer fees. Then, put in a trailing stop, hoping to catch an upswing. It was nice to see how things worked, but it took a good bit of time to monitor, and really volatile coins (like ZCash) were all over the place. I don't have a huge farm or anything, so it really is a relatively small difference in the end. It is just easier to let MPH take care of it all, and then transfer to an offline wallet when I build up enough balance in my preferred coin.

blimeyfool

newbie

Activity: 10

Merit: 0

Quote from: Xardas2014 on April 28, 2017, 10:01:28 AM

Quote from: blimeyfool on April 28, 2017, 08:29:53 AM

Quote from: Smokeyw on April 27, 2017, 05:59:22 PM

when do you add Ubiq Huh

since musicoin is added so fast i hope this one finaly get added too
and i hate it to mine on a other site just for one coin

My +1 post was deleted, but here's another vote for Ubiq. Ethash is the most profitable algorithm for me and Ubiq pops to the top of the most profitable coins from time to time. I'm not sure how hard it is to add another coin, but it would be most appreciated.

Cryptonight and Equihash are the next most profitable, so all of the other coins on those algorithms would be my next vote: KRB, ZDASH, KMD, BIP, XDN, etc.

Thanks for a great pool!

Mining a coin when it pops to the top of whattomine isn't always your best option. Most people don't even look to see what the coin is actually paying, they just see what is on top and start mining it. Example:

Ethereum(ETH)
Ethash
BT: 15.23s
BR: 4.85
LB: 3,615,603
321,761,623M
21.12 Th/s
2.0%
0.2768
0.2823
0.04911001
(Poloniex)
3.0%
$5,778,184,019
68,987.72 BTC   0.01359<----------------------------currently paying
0.01386   $17.90
$16.54   100% | 100%
100% | 100%
Exp2
Expanse(EXP)
Ethash
BT: 1m 28s
BR: 8.00
LB: 598,246
7,470,836M
84.90 Gh/s
-7.6%
19.6141
18.1184
0.00070841
(Poloniex)
-2.3%
$6,363,175
167.96 BTC   0.01389<----------------------------currently paying more
0.01284   $16.57
$15.22   102% | 93%
89% | 91%

Sorry the site fucks up the formatting, but as you can see ETH is on top, but EXP is actually paying more. It is also more profitable to be mining coins where the diff has dropped, instead of what is simply listed on top. It takes time to mine coins, so mining the top coin NOW might not be very profitable by the time you actually get the coins.

Well, whether you want to use the auto switching pool or manually switch depending on your own criteria, we need the coin to be available on the pool to even have the option of mining that coin.

Xardas2014

hero member

Activity: 635

Merit: 500

Quote from: blimeyfool on April 28, 2017, 08:29:53 AM

Quote from: Smokeyw on April 27, 2017, 05:59:22 PM

when do you add Ubiq Huh

since musicoin is added so fast i hope this one finaly get added too
and i hate it to mine on a other site just for one coin

My +1 post was deleted, but here's another vote for Ubiq. Ethash is the most profitable algorithm for me and Ubiq pops to the top of the most profitable coins from time to time. I'm not sure how hard it is to add another coin, but it would be most appreciated.

Cryptonight and Equihash are the next most profitable, so all of the other coins on those algorithms would be my next vote: KRB, ZDASH, KMD, BIP, XDN, etc.

Thanks for a great pool!

Mining a coin when it pops to the top of whattomine isn't always your best option. Most people don't even look to see what the coin is actually paying, they just see what is on top and start mining it. Example:

Ethereum(ETH)
Ethash
BT: 15.23s
BR: 4.85
LB: 3,615,603
321,761,623M
21.12 Th/s
2.0%
0.2768
0.2823
0.04911001
(Poloniex)
3.0%
$5,778,184,019
68,987.72 BTC   0.01359<----------------------------currently paying
0.01386   $17.90
$16.54   100% | 100%
100% | 100%
Exp2
Expanse(EXP)
Ethash
BT: 1m 28s
BR: 8.00
LB: 598,246
7,470,836M
84.90 Gh/s
-7.6%
19.6141
18.1184
0.00070841
(Poloniex)
-2.3%
$6,363,175
167.96 BTC   0.01389<----------------------------currently paying more
0.01284   $16.57
$15.22   102% | 93%
89% | 91%

Sorry the site fucks up the formatting, but as you can see ETH is on top, but EXP is actually paying more. It is also more profitable to be mining coins where the diff has dropped, instead of what is simply listed on top. It takes time to mine coins, so mining the top coin NOW might not be very profitable by the time you actually get the coins.

blimeyfool

newbie

Activity: 10

Merit: 0

Quote from: Smokeyw on April 27, 2017, 05:59:22 PM

when do you add Ubiq Huh

since musicoin is added so fast i hope this one finaly get added too
and i hate it to mine on a other site just for one coin

My +1 post was deleted, but here's another vote for Ubiq. Ethash is the most profitable algorithm for me and Ubiq pops to the top of the most profitable coins from time to time. I'm not sure how hard it is to add another coin, but it would be most appreciated.

Cryptonight and Equihash are the next most profitable, so all of the other coins on those algorithms would be my next vote: KRB, ZDASH, KMD, BIP, XDN, etc.

Thanks for a great pool!

xs.over

full member

Activity: 376

Merit: 103

Hi, All.
Who mine xzc on minigpoolhub with ccminer on nVidia cards? Need your healp
I have some problems with this pool: stratum difficulty is changes too often and due to this my share rate is about half of the amount that should be (2-5 shres per minute, while on suprniova same hardware pulls average 7 shares per minute).
In the end: earnings in xzc about 15% less then should (calculating average difficulty and hashrate).
BTW on suprnova pool the same hardware gives about double shares to pool. but I don't like to mine xzc on suprnova due to very low pool's hashrate

Smokeyw

full member

Activity: 228

Merit: 100

when do you add Ubiq Huh

since musicoin is added so fast i hope this one finaly get added too
and i hate it to mine on a other site just for one coin

pornluver

hero member

Activity: 960

Merit: 514

How do I get an email if things went wrong in miningpoolhub

I am pretty sure it's in this URL

https://miningpoolhub.com/?page=account&action=hubworkers

But I no longer see a checkbox saying monitor there.

echris1

full member

Activity: 125

Merit: 100

Any plans on adding Ubiq to the eth multi-algo?

Ends up on top of whattomine every now and then.

Xardas2014

hero member

Activity: 635

Merit: 500

Quote from: lankyman on April 26, 2017, 06:25:29 PM

I am so confused here and i dont know what the hell to do anymore.

How do you convert the coins you mined to BTC | bitcoin.

I have click on say zcash and then i enter in my address of my bitcoin and then i enter in my pin number and i click on update BUT then it says invalid address , i dont understand

Do you really have to have address for all those coins? this is crazy.

There must be way to convert all the mined data to BTC ?

Please assist me if you can , and i appreciate lay-mans easy speak please.
I am not advanced.

https://miningpoolhub.com/?page=account&action=autoexchange and set the coin you want to get after exchanges have occurred. In your case, you want BTC, so set it to Bitcoin and click "set auto exchange coin"............you are done.........almost. Coins mined before you set an exchange coin have to be manually sent to the exchange. Let's say for example you have Gamecredits listed under "Balances: on the balance page...........click manage wallet of Gamecredits, then click the transfer arrow to send them to the exchange. Do this for each coin you want exchanged into Bitcoin. Job done. Any coin mined AFTER you set your exchange coin, in this case bitcoin, will automatically be sent to the exchange and you get btc back into your Bitcoin balance.....................keep in mind, this is NOT instant and might take several hours, or on a small volume coin, several days.

lankyman

sr. member

Activity: 382

Merit: 250

I am so confused here and i dont know what the hell to do anymore.

How do you convert the coins you mined to BTC | bitcoin.

I have click on say zcash and then i enter in my address of my bitcoin and then i enter in my pin number and i click on update BUT then it says invalid address , i dont understand

Do you really have to have address for all those coins? this is crazy.

There must be way to convert all the mined data to BTC ?

Please assist me if you can , and i appreciate lay-mans easy speak please.
I am not advanced.

manotroll

sr. member

Activity: 305

Merit: 250

Decred and supported?
How can i test double mining of eth + decred?
Which parameters should I use?

Quote from: miningpoolhub on April 06, 2017, 10:11:51 PM

Quote from: manotroll on April 06, 2017, 08:33:16 PM

Is it possible to change the username?

I can manually change your username.
Please pm me your id, username, new username.

I already sent you the exchange data

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 253. (Read 487870 times)