Author

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 256. (Read 487870 times)

member
Activity: 124
Merit: 10
hi,

i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.

please help me Smiley
sr. member
Activity: 512
Merit: 260
Hi I am using MultiPoolMiner and it seems to select the correct algo for the most prof coin. It is using port 17xxx

Is this right? I see on MPH home page that it should be using port 12xxx for Mult-alog switching.

So I am confused now.   so 17xxx + MPM = 12XXX?
sr. member
Activity: 512
Merit: 260
Is Musicoin Auto Exchange Stuck?

I mine ethash on 17020.  On most coins, I see balances move through unconfirmed, then confirmed credited for auto exchange, then on exchange, and finally my chosen coin balance will increase.

Over the past 3 days or so, I see Musicoin showing up in my account and the balance says credited for auto exchange, but it never moves to the exchange.  It has been a couple of days and there is a pretty decent balance in there, so I would think it should go to the exchange by now.

Thanks!

Same here.
sr. member
Activity: 476
Merit: 250
How can I turn off Auto exchange? I turned it on for XZC and BTC, but I'd like to exchange manually now.
Thanks

Same place that you turned it on; in 'Auto Exchange' on the menu that is to the left of the website. Change it from 'Bitcoin' to 'Not Set'.
newbie
Activity: 5
Merit: 0
How can I turn off Auto exchange? I turned it on for XZC and BTC, but I'd like to exchange manually now.
Thanks
newbie
Activity: 10
Merit: 0
Is Musicoin Auto Exchange Stuck?

I mine ethash on 17020.  On most coins, I see balances move through unconfirmed, then confirmed credited for auto exchange, then on exchange, and finally my chosen coin balance will increase.

Over the past 3 days or so, I see Musicoin showing up in my account and the balance says credited for auto exchange, but it never moves to the exchange.  It has been a couple of days and there is a pretty decent balance in there, so I would think it should go to the exchange by now.

Thanks!
sr. member
Activity: 476
Merit: 250
Anyone knows does autoexchange for musicoin works on miningpoolhub?

It should be; it's using Bittrex exchange.

No any autoexchange for musicoin since open musicoin pool for me.
Looks very strange.
And what i must do vs 45 maxcoins and some vcash coin?
No any autoexchange very long time, so can i delete it or exchange it manually?


If it says 'Credited for Auto Exchange' then it's fine; you don't need to do anything. If there is a problem then MiningPoolHub will fix it for everyone.
member
Activity: 86
Merit: 10
Anyone knows does autoexchange for musicoin works on miningpoolhub?

It should be; it's using Bittrex exchange.

No any autoexchange for musicoin since open musicoin pool for me.
Looks very strange.
And what i must do vs 45 maxcoins and some vcash coin?
No any autoexchange very long time, so can i delete it or exchange it manually?
sr. member
Activity: 476
Merit: 250
is the website down or pools as well? can't get a live website

Noticed the odd blip but it's up.
sr. member
Activity: 476
Merit: 250
Anyone knows does autoexchange for musicoin works on miningpoolhub?

It should be; it's using Bittrex exchange.
sr. member
Activity: 602
Merit: 250
is the website down or pools as well? can't get a live website
member
Activity: 86
Merit: 10
Anyone knows does autoexchange for musicoin works on miningpoolhub?
sr. member
Activity: 476
Merit: 250
I've been mining with multipoolminer for quite a while.

I wonder if there is a way to check hash at miningpoolhub? For example, say I am connected. Can I look at miningpoolhub and see ah, this rig is producing this much that rig is producing that much?

How much money we lost on "autoexchange"? Just curious.

I think MiningPoolHub is trying to add features like that but maintenance and new coins take a lot of time.

You can see the live hashrate of each worker if you go into each coin but that's it; it's all quite disconnected.

I would also like this. Some place you can monitor what is mining were. Not needing to go search all the coins dashboards that's is in your balance.

Yes, a proper dashboard is definitely needed that unifies all the pools, has useful stats and breaks down works.
sr. member
Activity: 512
Merit: 260
I've been mining with multipoolminer for quite a while.

I wonder if there is a way to check hash at miningpoolhub? For example, say I am connected. Can I look at miningpoolhub and see ah, this rig is producing this much that rig is producing that much?

How much money we lost on "autoexchange"? Just curious.

I think MiningPoolHub is trying to add features like that but maintenance and new coins take a lot of time.

You can see the live hashrate of each worker if you go into each coin but that's it; it's all quite disconnected.

I would also like this. Some place you can monitor what is mining were. Not needing to go search all the coins dashboards that's is in your balance.
hero member
Activity: 960
Merit: 514
Can anyone explain this pictures:

https://i.stack.imgur.com/VpzFO.png

I mined at 179-180 mh/s

And yet I got a mere 140 mh/s at miningpoolhub

I should test other pools too.

I noticed it today.

The pool is just measuring what it receives over 5 minutes (submitted shares); it doesn't actually know your hashrate.
Never mind. It's fixed. Hmm the problem is the opposite now.

https://i.stack.imgur.com/cTn0M.png

The pool knows my hashrate. It's pretty exact.

Why it says I make .02 shares /s though is beyond me.


Yes, it will go up and down because it doesn't have access to the hashrate; it works out the same.

It's a 0.02% share of the pool; if it was 100% then you would be the only person in the pool and would own everything that is found.

What do you mean it doesn't have access to my hashrate? Oh I see. It only knows the number of valid shares and the stratum difficulty of my miner. So that's why it went up and down. It estimates my hashrate based on that.

sr. member
Activity: 476
Merit: 250
Can anyone explain this pictures:

https://i.stack.imgur.com/VpzFO.png

I mined at 179-180 mh/s

And yet I got a mere 140 mh/s at miningpoolhub

I should test other pools too.

I noticed it today.

The pool is just measuring what it receives over 5 minutes (submitted shares); it doesn't actually know your hashrate.
Never mind. It's fixed. Hmm the problem is the opposite now.

https://i.stack.imgur.com/cTn0M.png

The pool knows my hashrate. It's pretty exact.

Why it says I make .02 shares /s though is beyond me.


Yes, it will go up and down because it doesn't have access to the hashrate; it works out the same.

It's a 0.02% share of the pool; if it was 100% then you would be the only person in the pool and would own everything that is found.
hero member
Activity: 960
Merit: 514
Can anyone explain this pictures:

https://i.stack.imgur.com/VpzFO.png

I mined at 179-180 mh/s

And yet I got a mere 140 mh/s at miningpoolhub

I should test other pools too.

I noticed it today.

The pool is just measuring what it receives over 5 minutes (submitted shares); it doesn't actually know your hashrate.
Never mind. It's fixed. Hmm the problem is the opposite now.

https://i.stack.imgur.com/cTn0M.png

-----



The pool knows my hashrate. It's pretty exact.

Why it says I make .02 shares /s though is beyond me.


The new screenshot is even amazing. Miningpoolhub says I am sending 212mh/s. I know that the only machine points to that account produces constant 180 mh/s




Also what is this:

Round Shares [Submitted shares since last found block (ie. round shares)]
Est. Shares    20,150,275 (done: 0%)
Your Valid    0.0000
Your Invalid    0.0000 (0.00%)

So since last found block I haven't submitted any valid shares? It doesn't make sense.

Also in worker configuration there is a switch called "monitor" what is it?

Worker Configuration



sr. member
Activity: 476
Merit: 250
Can anyone explain this pictures:

https://i.stack.imgur.com/VpzFO.png

I mined at 179-180 mh/s

And yet I got a mere 140 mh/s at miningpoolhub

I should test other pools too.

I noticed it today.

The pool is just measuring what it receives over 5 minutes (submitted shares); it doesn't actually know your hashrate.
hero member
Activity: 960
Merit: 514
Can anyone explain this pictures:

https://i.stack.imgur.com/VpzFO.png

I mined at 179-180 mh/s

And yet I got a mere 140 mh/s at miningpoolhub

I should test other pools too.

I noticed it today.
sr. member
Activity: 476
Merit: 250
I did this more or less as an experiment Smiley

The idea of preferring slow speeds is that you contribute to with a small % (say 1%) to each block
worded by your mining pool. If your MiningPool wins that block, you get your 1% of the reward associated
with that block. Otherwise my computational power is lost.

So, if your mining Pool wins say 10blocks/day, after 1 day of work statistically you get (10*Reward_of_each_block)* (1%).



The problem, instead, of renting a lot of computational power for a short time is that I might
contribute 50% just for a couple of blocks, and if those blocks don't win, I'm screwed.
(If the win, instead, I can get much more reward).


Is what I wrote above correct? Sorry I'm a total noob with mining! Smiley


Another specific question: what are the 'Round Shares' ? Are they collected over multiple blocks, or reset to zero after each block (won or lost)?

That's the idea; if you flip a coin long enough then it will be 50% heads.

It's PPLNS so the shares are a bit confusing; you will get shares even after you have stopped mining and is not equal throughout the round.

Pool is using PPLNS. So you get less at starting blocks but get more from last blocks. You even get few round of rewards even when you stop mining.
Jump to: