Please add email notification for low speed that could indicate a card that stopped working. To eliminate possibility of fake alerts (due to fluctuations based on miner dev fee), it could be something based on an avg calculated for 1-2h for example, for which we set a speed threshold (for example, I set 135mh/s eth for a 5card system which usually pulls 144mh/s eth, and if for 1h, the avg is under that, bang, email). While we will get a notification a bit late, at least we get one. Been using your pool for all my clients and so far, it's the best regarding payout and features (especially the auto-exchange which in my opinion is a gem, superior to nicehash even if the exchange is not instant, at a lower fee also). When you will add DCR like mentioned on twitter, it will be even better.
Until now I have been using one miner instance/card to be able to get email notification, but this requires better processors in systems, and updating miner software and/or settings are a pain for 5x mining software/system.
Keep up the good work!
Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 255. (Read 487870 times)
April 24, 2017, 07:55:51 AM
April 24, 2017, 07:12:09 AM
Please help me how to autoswitch between myriad-groestl,skein and neoscrypt with my rig? I am new and need your help. Which miner is more convenient to use for Miningpoolhub pool? Thanks in advance! 
Try MultiPoolMiner: https://github.com/aaronsace/MultiPoolMiner/releases
Enter the algorithms in the 'start.bat'.
April 24, 2017, 07:03:26 AM
Please help me how to autoswitch between myriad-groestl,skein and neoscrypt with my rig? I am new and need your help. Which miner is more convenient to use for Miningpoolhub pool? Thanks in advance!
April 24, 2017, 06:22:30 AM
If I start multipoolminer I often got message that I do not have this dll and that dll. I got that in pretty much every new rig I made.
I wonder.
What libraries I should install so I can easily run all the miners out there in multipoolminer?
I wonder.
What libraries I should install so I can easily run all the miners out there in multipoolminer?
It may be this:
https://github.com/djm34/sgminer-msvc2015/issues/4
Some of the included miners need the C++ runtimes:
https://www.microsoft.com/en-gb/download/details.aspx?id=40784
https://www.microsoft.com/en-us/download/details.aspx?id=48145
If you have Windows 7, please update PowerShell:
https://www.microsoft.com/en-us/download/details.aspx?id=50395
April 24, 2017, 05:47:40 AM
If I start multipoolminer I often got message that I do not have this dll and that dll. I got that in pretty much every new rig I made.
I wonder.
What libraries I should install so I can easily run all the miners out there in multipoolminer?
I wonder.
What libraries I should install so I can easily run all the miners out there in multipoolminer?
April 24, 2017, 04:39:09 AM
Something wrong with zcash pool?
Last Block found 22/04 23:31:52 (UTC)
Last Block found 22/04 23:31:52 (UTC)
April 24, 2017, 03:50:02 AM
hi,
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
What host are you mining?
FYI, If you mined at hub.miningpoolhub.com, you should move to appropriate nearest region server.
hub.miningpoolhub.com is backup server for ethash algo, does not support musicoin yet.
thanks, it work better now
April 24, 2017, 02:53:17 AM
hi,
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
What host are you mining?
FYI, If you mined at hub.miningpoolhub.com, you should move to appropriate nearest region server.
hub.miningpoolhub.com is backup server for ethash algo, does not support musicoin yet.
That's probably why I kept failing mining goerstl coins. Where should I mine anyway?
Also I wonder if I should donwload certain libraries before doing multipoolminer. I know I got to download c++ redistributable. Then I also know that I got to do OPEN SSL. What else should I download? Any lists?
Otherwise, most miner don't work.
Only ethash, equihash, cryptonight, lyra2z have several region host.
Groestlcoin is okay with hub.miningpoolhub.com
FYI, Groestlcoin is quite hard to mine with GPU these days. There seems some FPGA or ASIC for Groestl algo already.
multipoolminer needs latest powershell. I didn't need any other libraries to work. Maybe I already installed them.
April 24, 2017, 02:49:28 AM
Hi I am using MultiPoolMiner and it seems to select the correct algo for the most prof coin. It is using port 17xxx
Is this right? I see on MPH home page that it should be using port 12xxx for Mult-alog switching.
So I am confused now. so 17xxx + MPM = 12XXX?
Is this right? I see on MPH home page that it should be using port 12xxx for Mult-alog switching.
So I am confused now. so 17xxx + MPM = 12XXX?
12xxx is used when you use pool based switching. Pool calculates and disconnects, open port for specific miners.
Multipoolminer is client based switching which connect and disconnect by their own calculation.
Multipoolminer is working correctly AFAIK.
April 24, 2017, 02:47:17 AM
Is Musicoin Auto Exchange Stuck?
I mine ethash on 17020. On most coins, I see balances move through unconfirmed, then confirmed credited for auto exchange, then on exchange, and finally my chosen coin balance will increase.
Over the past 3 days or so, I see Musicoin showing up in my account and the balance says credited for auto exchange, but it never moves to the exchange. It has been a couple of days and there is a pretty decent balance in there, so I would think it should go to the exchange by now.
Thanks!
I mine ethash on 17020. On most coins, I see balances move through unconfirmed, then confirmed credited for auto exchange, then on exchange, and finally my chosen coin balance will increase.
Over the past 3 days or so, I see Musicoin showing up in my account and the balance says credited for auto exchange, but it never moves to the exchange. It has been a couple of days and there is a pretty decent balance in there, so I would think it should go to the exchange by now.
Thanks!
Same here.
Sorry
It was disabled at launching pool.
Now all things seems okay both pool and exchange site, so I enabled it now.
Sorry that I forgot to check and announce that I disabled at start.
April 24, 2017, 02:45:50 AM
Is Musicoin Auto Exchange Stuck?
I mine ethash on 17020. On most coins, I see balances move through unconfirmed, then confirmed credited for auto exchange, then on exchange, and finally my chosen coin balance will increase.
Over the past 3 days or so, I see Musicoin showing up in my account and the balance says credited for auto exchange, but it never moves to the exchange. It has been a couple of days and there is a pretty decent balance in there, so I would think it should go to the exchange by now.
Thanks!
I mine ethash on 17020. On most coins, I see balances move through unconfirmed, then confirmed credited for auto exchange, then on exchange, and finally my chosen coin balance will increase.
Over the past 3 days or so, I see Musicoin showing up in my account and the balance says credited for auto exchange, but it never moves to the exchange. It has been a couple of days and there is a pretty decent balance in there, so I would think it should go to the exchange by now.
Thanks!
Sorry
It was disabled at launching pool.
Now all things seems okay both pool and exchange site, so I enabled it now.
Sorry that I forgot to check and announce that I disabled at start.
April 24, 2017, 02:45:23 AM
Anyone knows does autoexchange for musicoin works on miningpoolhub?
It should be; it's using Bittrex exchange.
No any autoexchange for musicoin since open musicoin pool for me.
Looks very strange.
And what i must do vs 45 maxcoins and some vcash coin?
No any autoexchange very long time, so can i delete it or exchange it manually?
You need to manually exchange maxcoin and vcash.
Currently vcash pool and wallet is down due to vcash fork bug.
I'll run vcash wallet and payout if you want.
April 24, 2017, 02:43:04 AM
Anyone knows does autoexchange for musicoin works on miningpoolhub?
It was disabled at launching pool.
Now all things seems okay both pool and exchange site, so I enabled it now.
Sorry that I forgot to check and announce that I disabled at start.
April 24, 2017, 02:40:44 AM
Can anyone explain this pictures:
https://i.stack.imgur.com/VpzFO.png
I mined at 179-180 mh/s
And yet I got a mere 140 mh/s at miningpoolhub
I should test other pools too.
I noticed it today.
https://i.stack.imgur.com/VpzFO.png
I mined at 179-180 mh/s
And yet I got a mere 140 mh/s at miningpoolhub
I should test other pools too.
I noticed it today.
The pool is just measuring what it receives over 5 minutes (submitted shares); it doesn't actually know your hashrate.
-----
The pool knows my hashrate. It's pretty exact.
Why it says I make .02 shares /s though is beyond me.
The new screenshot is even amazing. Miningpoolhub says I am sending 212mh/s. I know that the only machine points to that account produces constant 180 mh/s
Also what is this:
Round Shares [Submitted shares since last found block (ie. round shares)]
Est. Shares 20,150,275 (done: 0%)
Your Valid 0.0000
Your Invalid 0.0000 (0.00%)
So since last found block I haven't submitted any valid shares? It doesn't make sense.
Also in worker configuration there is a switch called "monitor" what is it?
Worker Configuration
Monitor is email alarm feature.
If you turn it on and when your miner doesn't input share any more, email will be sent.
April 24, 2017, 02:35:05 AM
I've been mining with multipoolminer for quite a while.
I wonder if there is a way to check hash at miningpoolhub? For example, say I am connected. Can I look at miningpoolhub and see ah, this rig is producing this much that rig is producing that much?
How much money we lost on "autoexchange"? Just curious.
I wonder if there is a way to check hash at miningpoolhub? For example, say I am connected. Can I look at miningpoolhub and see ah, this rig is producing this much that rig is producing that much?
How much money we lost on "autoexchange"? Just curious.
1) You need to separate each worker as account if you want to track each mining rig's profit.
2) exchange trading fee, withdrawal fee, pool auto exchange fee (0.2%).
Pool try to merge all coins from miners and withdraw them once to lower the withdrawal fee.
Transaction fee is included in pool auto exchange fee.
April 24, 2017, 02:30:22 AM
I saw this table at miningpoolhub
So equihash is 6362
and ethash is .064
I think that's why miningpoolminer uses ethash
However, when ratio between hash between ethash and equihash is 30Mh/s per 300h/s so that means 100k times, whattomine would recommend equihash right now
Oh no. Still ethash. Hmmmm... Musiccoin though. Zclassic is not avaialable either in miningpoolhub.
Groestl is on top again.
Hmm your miner selection is correct then. Nvm.
Code:
Equihash Zcash 17023 6,362.14238 703.63K 2
Cryptonight Monero 17024 1,732.88262 2.45M 1
Yescrypt Myriadcoin-Yescrypt 17021 78.42032 133.00K 2
NeoScrypt Feathercoin 17012 1.76224 309.16M 3
Lyra2z Zcoin 17025 1.54223 13.59G 1
Ethash Ethereum 17020 0.06424 1.67T 3
Lyra2RE2 Vertcoin 17018 0.05724 3.86G 1
Scrypt Gamecredits 17001 0.05640 567.43M 4
Qubit Digibyte-Qubit 17014 0.05438 6.40G 2
Groestl Groestlcoin 17004 0.04902 380.95M 1
Myriad-Groestl Myriadcoin-Groestl 17005 0.04031 2.23G 2
X11 Dash 17007 0.02006 706.00G 8
Skein Digibyte-Skein 17016 0.00890 29.66G 2
Sia Siacoin 17022 0.00057 2.32T 1
Keccak Maxcoin 17003 - 2.85G 1
So equihash is 6362
and ethash is .064
I think that's why miningpoolminer uses ethash
However, when ratio between hash between ethash and equihash is 30Mh/s per 300h/s so that means 100k times, whattomine would recommend equihash right now
Oh no. Still ethash. Hmmmm... Musiccoin though. Zclassic is not avaialable either in miningpoolhub.
Groestl is on top again.
Hmm your miner selection is correct then. Nvm.
Whattomine shows list sorted by average profitability for last 24 hours. But miningpoolhub shows sorted by realtime, current profitability.
I sometimes check whattomine and find myself confused by this little difference.
You sure? Whattomine display 4 numbers. Current, last 24 hours, 3 days and 7 days I think. I always select current. I sorted by current
Hey, then that's not the problem.
Both profitability thing doesn't need to match same because hardware normalization is manually set.
FYI, Zclassic was already listed, Musicoin is newly added on miningpoolhub now.
Also, besides at miningpoolhub front page, where else can we see un normalized BTC/GH/s/day? Just curious. The current ones.
The number in miningpoolhub doesn't take into account miningpoolhub "luck" right? It's exact number that should be universal based on difficulty etc.
I
You can see no normalized (raw) profitability table at
https://miningpoolhub.com/?page=home&normalize=none
Just click "No Norm." tab in "AMD, NVIDIA, No Norm" menu.
miningpoolhub does take into account overall stats only. No luck prediction.
April 24, 2017, 02:28:16 AM
I'm curious about the 17XXX ports.
Since each coin pool is PPLNS isn't coin switching essentially like pool hoping and therefor would lead to less profits long-term? Is PPLNS calculated per coin or per algo? If it were per algo I don't think it would be a problem.
Since each coin pool is PPLNS isn't coin switching essentially like pool hoping and therefor would lead to less profits long-term? Is PPLNS calculated per coin or per algo? If it were per algo I don't think it would be a problem.
It's per coin but this has been discussed before; you wont be penalized.
Any technical explaination on this? Are clients connected to the 17XXX port on a different PPLNS calculation or what? 100+ pages is a lot to go through.
No, each coin has it's own pool then the 17XXX port is like dynamic port forwarding.
I understand how the server-side dynamic coin switching works and how it waits till a block is found. What I'm wondering is how that comes into play with PPLNS since its possible for the most profitable coin to change frequently.
For instance, I'm mining ethash only, port 17020. ETH is the most profitable, but then ETC becomes more profitable. ETH finds a block switches to ETC. Five minutes into ETC we find a block and ETH is more profitable again so it switches back. I'm not sure what the PPLNS is set for but I would only get 5 minutes worth of hashing for that round. Maybe MininigPoolHub can explain the math here? Why is there no "rounds" page at MPH?
You get 5 minutes worth of hashing from ETC pool. Your shares can be included at next round even you left ETC pool.
So it's just same as ETH pool mining, The only difference is that you mined ETC when it's expected to be more profitable than ETH.
Pool can't guarantee that you get more profit than mining ETH only, but you should get more in long term.
Pool usually doesn't switch that frequently like 5 min for ethash algo. It has some internal settings to prevent endless switching.
April 24, 2017, 02:26:42 AM
Is the .0004 BTC fee for autopayments or only for cash outs? It isn't clear to me.
Both. Auto or manual payouts are charged.
Usually actual transaction fee from bitcoin blockchain is higher than that. Pool pays remain amount.
April 24, 2017, 02:21:42 AM
hi,
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
What host are you mining?
FYI, If you mined at hub.miningpoolhub.com, you should move to appropriate nearest region server.
hub.miningpoolhub.com is backup server for ethash algo, does not support musicoin yet.
That's probably why I kept failing mining goerstl coins. Where should I mine anyway?
Also I wonder if I should donwload certain libraries before doing multipoolminer. I know I got to download c++ redistributable. Then I also know that I got to do OPEN SSL. What else should I download? Any lists?
Otherwise, most miner don't work.
April 24, 2017, 02:15:04 AM
hi,
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
i have a problem with musicoin !
i mine ethash algo on port 17020 and when its musicoin my miner said "user not authorized".
i have try all individual port 20535 20555 20585 and 20565, only with 20585 musicoin i can't mine.
i have add my worker on musicoin manually but always it's don't work.
please help me
What host are you mining?
FYI, If you mined at hub.miningpoolhub.com, you should move to appropriate nearest region server.
hub.miningpoolhub.com is backup server for ethash algo, does not support musicoin yet.
Jump to: