Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 283. (Read 487870 times)

New Cpuminer binaries for forked Zcoin algo:

https://mega.nz/#!mVY2hZCD!jHlleKrZp4eoZSOn8Idhgw7dIKEfMM_buQwhUsxswZs


New Cpuminer sources for forked Zcoin algo:

https://mega.nz/#!HZIkUSpa!Raf_zNC9Whbsm0jIEChxIS-fyiforGIhfaQx3CIODkU

I just saw my confirmed balance go from aproximately 0.7 to approximately 1.25 over about 10 minutes..... what's going on with all the unconfirmed stuff stacking up?

I came here to ask about the same thing.  Nothing has been added to my confirmed balance for many hours.  Also, how is it that multiple blocks are awaiting the same number of confirmations, or that older blocks need more confirmations than newer ones?

my adzcoins vanished...........i had 4 of them and there is only 0,5 now........

edit: ok seems to be restored.......

Use caution with the VCash pool - it has been mining on its own fork for 2+ days. Miningpoolhub is at VCash block 599895 currently while the rest of the network is at 600754:

https://vcash.miningpoolhub.com/index.php?page=statistics&action=pool

https://explorer.vchain.info/block/0b16579188afdad895bf77f2606808e80836b44c5a403e8ae3af70b31973f93b
https://www.blockexperts.com/xvc/height/600754

I recommend MultiPoolMiner. Enter your username and it will start benchmarking then mining. You are best waiting for the benchmarks to complete as it may popup with security warnings. It will then use the most profitable miners that work on your system.

Set the auto exchange coin on MiningPoolHub so that you get paid in just one single currency.

I just started using this the other day, and I am fairly comfortable with computers in general, I do know some scripting language from playing text based games or writing triggers for zmud.

I have been mining for a few months, at the onset of monero. 

I have a 1050 TI x 5 and +1 970 GTX rig,
1050 TI at work
A RX 470 paired with a 6 core AMD waiting for more units I am ordering and finally a 3960x intel which I am looking for a x79 board to do a hybrid CPU/GPU build maybe even make my own personal computer upgrade / miner.

So not a long time vet, but I am not exactly a noob either.

BUT I do want to say its a bit underwelming to me, the instructions which are supplied in the downloads or on website.  How you configure things with MPH client for example.  sgminer doesnt work at all, ive never used it.. the help file is obnoxious when you load.  I tried in a batch, i na config, at the end of the file, tOK, I saw this setting information that SG miner asks for in the claymore readme files.  OK.  I dont know where it goes it still, a batch file? a command?  How do i Make it execute in conjunction with the miner.   If i make a config file that seems to read it, but what about all the kernel files.   What if I dont want to use that miner and had a different one.  I understand the hub switching but I can use others ports, and pools but then what happens to my currency? Also eth dual mining, no decred info on the website or ability to check balances.  When you say 17xxx do i really leave that, and the rest is magic.. in the copy and paste when do i change usernames and dont I.

Yeah the whole config files and json files are new to me, and I dont get how I have .1 zclassic on exchange, or what that means.  Thats confusing to.   Where  Ifigured I could come for help and guides its all people posting pools and what not, im not trying to read 100 pages of old data!!  The fundamentals of  this system or links to similar systems would be handy.   If nothing else the miner control is nice, I just can only use it for a couple coins.

I also get big red fails on eth dual, its got to be a config issue at this point but that dual mining has a lot to it.. so in time ill figure it out im sure! but hopefully my coins miined go someplace I can use them.  I am using my suprnova account and wallet addie so one can hope.

The struggle is real, but for everyone else it sounds like its pretty good.  Thanks for your work on this, I do like it and once i figure out how to use the miner control interface than maybe ill look at the other stuff!

Thank you

Hi miningpoolhub guys

I don't see credited blocks 59943 and 60015 , it's already bad enough that it took almost 24 hours to find a block, and after that, it has not been credited, what is going on?

can you please investigate? (username: lightman )
thanks
indkt.

Your payout is correct for the last 24 hours of found blocks. I think you are misunderstanding how mining works; you get shares in what coins are found. It uses the term 'shares' on your dashboard: https://monero.miningpoolhub.com/index.php?page=dashboard

As you can see the last 24 hours is 38% unlucky but the all time luck is only 5% unlucky:
https://monero.miningpoolhub.com/index.php?page=statistics&action=blocks

Just keep mining and it will level out over time; the next couple of days could be lucky but the stats show that it is working.
The more big miners that this pool gets then the lower the variance in luck between days.

The Monero pool has been running for 6 weeks, please help it grow.

@miningpoolhub admin

Again, what is wrong with MONERO payouts, I get less than half of what should ?!?!

I got 7.80568624 in last 24 hrs, I should get 13 XMR.
For 10XMR payout it tool a 32 hours to earn, it is almost half. Where are XMR coins gone?

Please fix this, or I will leave pool.
I am always in top 5 miners. Not jumping from pool to pool, but this is really heavy for my wallet.

Hello!  First off, I really like what you've done with this mining website.  I've been mining for about 3 months and I've had great success, and your hard work shows.

Do you have an estimate on when you'll be updating the DASH wallet to 12.1?

Here's a cool page showing who's switched and who hasn't: https://dashpay.atlassian.net/wiki/display/DOC/Mining+pools

It's gonna be one shitty day for zcash today  crap!, freaking variance!

I too belive that ETH/XMR/DCR devs are good.
I will add DCR, LBRY one by one.

Thank you for suggestion.

Still loving this pool! You can really tell how much work you put into it.

I just want to throw my support for a DCR pool here. I strongly believe in its mission and dev team. Charles Lee also said ETH/XMR/DCR have good dev teams. I believe it has more growth potential than SC or LBRY.

Thanks again

Yes, but I will enable auto exchange one or two days later as vcash will hardfork within 24 hours.
Network may split at this hardfork.

Ah.. my bad.
I fixed it.

Vcash is trading again on Poloniex. Could it be re added to Auto Exchange?

I believe the coin profit API needs updating as they reported this as an issue with MultiPoolMiner when using the coin pools instead of the algorithm pools. Think the http is a typo in the post but the server addresses are from the API.

I was about to write this info but found your exactly same answer I was thinking.

Thank you for your detailed instruction.
I planned to make "one page to check whole mining hashrate across all coins", but it's constantly delayed due to new works. (new coin launching, monitoring, fixes, wallet updates, performance optimization)

I think I have to work harder now.