[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 29.

RivAngE

full member

Activity: 728

Merit: 169

What doesn't kill you, makes you stronger

Quote from: Holymama on June 01, 2018, 01:45:52 AM

I transfered my ZCl to ZEC address. The destination said they dont have my coins. They said that I should check in with you guys.
Is anyway I could get them back?

Your post is a bit confusing! What is each of these addresses, ZCL and ZEC I mean. Which address is from Mining Pool Hub and which is personal and/or from an exchange.
The sender cannot help you, so if you sent from MPH to an exchange, only the exchange can help you. If you sent from MPH to your personal address, then maybe I know how to fix it... I'll have to research it.

Boriss

full member

Activity: 728

Merit: 115

Quote from: tbearhere on May 31, 2018, 04:38:18 PM

On Zcoin.....worker difficulty is sooooo high...I get an accept once every 5 minutes if I'm lucky. What goes? thx

Currently diffculty is around 28.3K and one day ago it was around 33K.
we have also been on 26K few days ago but still, I don't see anything special happening.

Holymama

newbie

Activity: 2

Merit: 0

I transfered my ZCl to ZEC address. The destination said they dont have my coins. They said that I should check in with you guys.
Is anyway I could get them back?

JCS-CCT

jr. member

Activity: 154

Merit: 1

Electroneum (ETN) has a patch. Please update and open up pool. Thanks!
https://twitter.com/electroneum/status/1002337417502842881

tbearhere

legendary

Activity: 3164

Merit: 1003

On Zcoin.....worker difficulty is sooooo high...I get an accept once every 5 minutes if I'm lucky. What goes? thx

entwine333

newbie

Activity: 1

Merit: 0

Hi,

I've created an android app for monitoring status on MPH with 0 ads. You can check it on https://play.google.com/store/apps/details?id=com.datarius.miningpoolhubmonitor

Feedback would be appreciated.

Myth888

full member

Activity: 343

Merit: 102

Quote from: ultanium on May 30, 2018, 06:25:40 PM

Quote from: 4ward on May 30, 2018, 11:55:06 AM

Quote from: ultanium on May 30, 2018, 08:51:26 AM

Need to cash out BTCP since pool is offline, have .00095 stuck which is not the minimum .001. How do I get this out?

Ult

It's 2 cents... Is it that important? Cheesy

In crypto, everything is important, but I won't cry over this one. Grin

You would think that balances would be pushed out when a pool is closed, but time after time, sites just keep our balances and then they disappear. Bulwark took me for about $20, Altminer probably 2/3rds of that. Coinfoundry was the only one that stepped up when they closed a pool, wish MPH would do the same.

BTCP was never opened for mining. it was just given out as your bitcoin balance when it forked. most pools will not give you forked coins

ultanium

newbie

Activity: 8

Merit: 0

Quote from: 4ward on May 30, 2018, 11:55:06 AM

Quote from: ultanium on May 30, 2018, 08:51:26 AM

Need to cash out BTCP since pool is offline, have .00095 stuck which is not the minimum .001. How do I get this out?

Ult

It's 2 cents... Is it that important? Cheesy

In crypto, everything is important, but I won't cry over this one. Grin

You would think that balances would be pushed out when a pool is closed, but time after time, sites just keep our balances and then they disappear. Bulwark took me for about $20, Altminer probably 2/3rds of that. Coinfoundry was the only one that stepped up when they closed a pool, wish MPH would do the same.

siroliver

newbie

Activity: 23

Merit: 0

Quote from: JCS-CCT on May 30, 2018, 01:47:22 PM

I hope it gets back to normal soon. I have an interrupted transaction (not on MPH). I hope not lost.

Edit: Looks like MPH switched back to the new chain, but still having problems.

they are clueless i still did not receive credit since 22

What is happening with zcash i finished 18 hr long session i got like nothing this place is becoming unusable im missing
zcash 1.0
Bitcoin-Gold 0.5
Monacoin 0.53
Monero 1.2
only thing working ok is Electroneum even its not show properly hash rate at least im getting credit probably missing another 2 Electroneum.

51054035 2018-05-22 04:47:41 (UTC) Credit Confirmed 1578074 0.00001741
51046787 2018-05-22 03:19:31 (UTC) Credit Orphaned 1578034 0.00001939
51041325 2018-05-22 03:07:33 (UTC) Credit Confirmed 1578024 0.00001527
51035707 2018-05-22 02:37:22 (UTC) Credit Confirmed 1578009 0.00000836
51028038 2018-05-22 02:31:10 (UTC) Credit Confirmed 1578003 0.00002151
51022236 2018-05-22 01:55:37 (UTC) Credit Confirmed 1577986 0.00003399
51016739 2018-05-22 01:48:55 (UTC) Credit Confirmed 1577983 0.00003476
51011217 2018-05-22 01:43:09 (UTC) Credit Orphaned 1577980 0.00003562
51005812 2018-05-22 01:37:54 (UTC) Credit Confirmed 1577977 0.00003491

JoenNL

member

Activity: 571

Merit: 18

Quote from: JCS-CCT on May 30, 2018, 01:47:22 PM

I hope it gets back to normal soon. I have an interrupted transaction (not on MPH). I hope not lost.

Edit: Looks like MPH switched back to the new chain, but still having problems.

Cryptopia is on the same block as ETN V7, that is not what whattomine is showing.
Whattomine is on the old chain, only pool i can find right now is etn.nanopool.org they are on the right chain. So lets mine!

Also it looks like MPH is down so.. Sad i tought MPH would be the first pool on the new blockchain, was waiting with my miners..

JCS-CCT

jr. member

Activity: 154

Merit: 1

I hope it gets back to normal soon. I have an interrupted transaction (not on MPH). I hope not lost.

Edit: Looks like MPH switched back to the new chain, but still having problems.

JoenNL

member

Activity: 571

Merit: 18

Quote from: JCS-CCT on May 30, 2018, 01:16:39 PM

Quote from: JoenNL on May 30, 2018, 12:59:15 PM

Quote from: JCS-CCT on May 30, 2018, 12:50:09 PM

The ETN blockchain explorer website isn't working, but the blockchain is working!

As of now, ETN is at block 307,596!

https://whattomine.com/coins/213-etn-cryptonightv7

That looks like the old chain not the correct new version!

That is a new url (v7).. why would they display the old blockchain? It also shows the difficulty going down which is what to be expected.

I really dont know! i am asking this also on the electroneum topic here on bitcointalk because ETN send nothing anymore on there social media.

https://bitcointalksearch.org/topic/m.38982174 this is the ETN topic, i also asked about what u say (about whattomine) so we will see!!

99% from the pools are on the old chain, exchanges are on the old chain, i dont know what is happening here.

JCS-CCT

jr. member

Activity: 154

Merit: 1

Quote from: JoenNL on May 30, 2018, 12:59:15 PM

Quote from: JCS-CCT on May 30, 2018, 12:50:09 PM

The ETN blockchain explorer website isn't working, but the blockchain is working!

As of now, ETN is at block 307,596!

https://whattomine.com/coins/213-etn-cryptonightv7

That looks like the old chain not the correct new version!

That is a new url (v7).. why would they display the old blockchain? It also shows the difficulty going down which is what to be expected.

JoenNL

member

Activity: 571

Merit: 18

Quote from: JCS-CCT on May 30, 2018, 12:50:09 PM

The ETN blockchain explorer website isn't working, but the blockchain is working!

As of now, ETN is at block 307,596!

https://whattomine.com/coins/213-etn-cryptonightv7

That looks like the old chain not the correct new version!

That block height also got showed by the pools what are on the old chain.

Quote from: tf2addict on May 30, 2018, 12:28:02 PM

Well a block on the real chain was found so I guess the fork is working.

How you are going to resolve this, MPH?

https://etn.nanopool.org/ is working on the current new chain (also look at ETN twitter and facebook).

For the pools what ''switched'' back to the old chain are doing something wrong. All pools should switch as fast as possible to the new ETN version (Cryptonight V7) so we can find new blocks on the new chain, after every block the diff get lower so the blocks goes faster.

When some pools without any reason go back to the old chain, the new chain will stay slow and the diff will stay high. So switch asap to the newest version and don't go back to an old not supported chain..

Copy from the etn.nanopool site:

Code:

nanopool
@nanopool_org
Anti-ASIC fork resulted in a dramatical hashrate drop in ETN network.
We are expecting network difficulty to stabilize in a few days,
however finding next blocks could take up to several hours.
Due to that ETN payments are stopped until the network is back to normal #ETN

My suggestion is to go to nanopool and if u want to go on miningpoolhub, wait till miningpoolhub are updated to the new chain. I also prefer miningpoolhub as poolsite, but for now i will be on nanopool till miningpoolhub is updated.

JCS-CCT

jr. member

Activity: 154

Merit: 1

The ETN blockchain explorer website isn't working, but the blockchain is working!

As of now, ETN is at block 307,596!

https://whattomine.com/coins/213-etn-cryptonightv7

tf2addict

full member

Activity: 675

Merit: 100

Well a block on the real chain was found so I guess the fork is working.

How you are going to resolve this, MPH?

4ward

member

Activity: 473

Merit: 18

Quote from: ultanium on May 30, 2018, 08:51:26 AM

Need to cash out BTCP since pool is offline, have .00095 stuck which is not the minimum .001. How do I get this out?

Ult

It's 2 cents... Is it that important? Cheesy

Lordas

member

Activity: 142

Merit: 10

Quote from: tf2addict on May 30, 2018, 05:36:11 AM

What is going on with the ETN pool? Did you not update your software? There is no way you should have 170 MH/s so quickly after the fork when other pools have 1 or 3. You are operating on a bad chain and apparently with the ASICs still mining. How did this happen? And why would you roll back to the previous version? You are essentially performing a 51% attack at this point and have created an unofficial, new, chain.

Is MPH claiming that they were running the updated software, found a block, and the blockchain rejected it?

BTW, Suprnova appears to be operating on this bad chain as well. Something is really messed up.

Still no block after 307500 at the others pools, seems this is the only pool where you can mine ETN... after dead fork...

ultanium

newbie

Activity: 8

Merit: 0

Need to cash out BTCP since pool is offline, have .00095 stuck which is not the minimum .001. How do I get this out?

Ult

tf2addict

full member

Activity: 675

Merit: 100

What is going on with the ETN pool? Did you not update your software? There is no way you should have 170 MH/s so quickly after the fork when other pools have 1 or 3. You are operating on a bad chain and apparently with the ASICs still mining. How did this happen? And why would you roll back to the previous version? You are essentially performing a 51% attack at this point and have created an unofficial, new, chain.

Is MPH claiming that they were running the updated software, found a block, and the blockchain rejected it?

BTW, Suprnova appears to be operating on this bad chain as well. Something is really messed up.

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 29. (Read 487517 times)