[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 30.

rednoW

legendary

Activity: 1510

Merit: 1003

Is mph compatible with completed ETC hardfork and coming ETN hardfork?

paulpoco

newbie

Activity: 25

Merit: 0

Monacoin is enabled again at Bittrex, is MPH going to enable Monacoin for auto exchange?

alby1976

newbie

Activity: 21

Merit: 0

Im using Nicerminer, with a 1080ti.
Currently it is mining Lyra2REv2 (Vertcoin)
Nicerminer says I get a hash speed of 66.491MH/s, but Mining pool hub overview says 51.31MH/s
This is quite a difference.
Why is this?

charlier69

newbie

Activity: 13

Merit: 0

Hey, (@miningpoolhub)

Can someone explain why this transaction has not been confirmed for hours?

This was sent by Mining Pool Hub to my wallet...

https://blockexplorer.electroneum.com/tx/07fd15ca14bbff9c04a246d8986aaec8ee9640dcac7f5f4a7b49e20cce9950e6

Thanks

miningpoolhub_support

newbie

Activity: 18

Merit: 0

Quote from: theodrim on May 21, 2018, 05:41:11 PM

So does mph supports ssl for ethereum or not? Asking because I see that claymore devfee 'says' it's connects to mph via ssl and there was some talk about it here - but no straight yes/not answer. Yes I understand that I can just procmon/wireshare claymore and see if it's actually doing that over secure channel but I rather have answer and if not I can always do that afterwards.

Here is the answer that you can try.

1) If you are using the latest ver. 11.7: Add "-checkcert 0" with ssl.
2) If you are not using previous ver.(less than 11.7): it worked with only put ssl.

alikas74

newbie

Activity: 18

Merit: 0

Quote from: siroliver on May 23, 2018, 10:25:57 AM

Yeah they use to help issue credits yesterday i ran monero with v7 and ssl and web dd not even show than 5 hr later shows little bit i got small credit like nothing i check my config is good

HI POOL ADMINS.
be better if you will add new coin to mine. like btpc lcc ic gbx and other.
i understand what its need to connect some coins with exchange where you work.
but i think whats be better for all youre members.

WBR
you member
alikas74

RivAngE

full member

Activity: 728

Merit: 169

What doesn't kill you, makes you stronger

Quote from: ?? on ??

scam always pays less than the calculated pay for hash
the stats on the website always incorrect

This is the most transparent auto-exchange pool I've seen. You can check how many coins were sold and how many were bought from your transactions history. Check this with the prices you get from the exchanges and let me know if you see any difference.

You're probably mining for just 24 hours and since there's a delay until you accumulate enough coins to be traded the first payouts start coming later and they seem to be lower than expected. Run it for 48h and then see the average of the last 24h.

siroliver

newbie

Activity: 23

Merit: 0

What is happening with zcash i finished 18 hr long session i got like nothing this place is becoming unusable im missing
zcash 1.0
Bitcoin-Gold 0.5
Monacoin 0.53
Monero 0.9
only thing working ok is Electroneum even its not show properly hash rate at least im getting credit probably missing another 2 Electroneum.

51054035 2018-05-22 04:47:41 (UTC) Credit Confirmed 1578074 0.00001741
51046787 2018-05-22 03:19:31 (UTC) Credit Orphaned 1578034 0.00001939
51041325 2018-05-22 03:07:33 (UTC) Credit Confirmed 1578024 0.00001527
51035707 2018-05-22 02:37:22 (UTC) Credit Confirmed 1578009 0.00000836
51028038 2018-05-22 02:31:10 (UTC) Credit Confirmed 1578003 0.00002151
51022236 2018-05-22 01:55:37 (UTC) Credit Confirmed 1577986 0.00003399
51016739 2018-05-22 01:48:55 (UTC) Credit Confirmed 1577983 0.00003476
51011217 2018-05-22 01:43:09 (UTC) Credit Orphaned 1577980 0.00003562
51005812 2018-05-22 01:37:54 (UTC) Credit Confirmed 1577977 0.00003491

AzartPay

copper member

Activity: 476

Merit: 1

AzartPay

Hello pool administrator! Add Azart coin! The X11 Algorithm. PoW+MN. The project started a few days ago, at the moment very profitable mining and masternodes! The main topic of the project here.

playfast

jr. member

Activity: 131

Merit: 3

Yes Monero is up again on Bittrex, too bad exchange is still down on MPH Cry

kickinthachicken

newbie

Activity: 2

Merit: 0

Bittrix shows Monero working, any reason why auto exchange isn't?

banec

newbie

Activity: 41

Merit: 0

maybe disable auto switch Bitcoin-Gold ?
After switching on the stock exchange to activate.

+ XMR Monero work on Bitrex

siroliver

newbie

Activity: 23

Merit: 0

Yeah they use to help issue credits yesterday i ran monero with v7 and ssl and web dd not even show than 5 hr later shows little bit i got small credit like nothing i check my config is good

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: z0n0 on May 22, 2018, 03:09:18 PM

Is MPH even still active on this forum/thread?
How do you get in touch with him?

He used to be quite active on here but there has been a distinct lack of presence and it seems to have happened soon after Nicehash went down and all the Nicehash refugees settled in MPH, maybe he's just too busy keeping the pool running.

z0n0

legendary

Activity: 1274

Merit: 1006

Is MPH even still active on this forum/thread?
How do you get in touch with him?

7h3235

newbie

Activity: 16

Merit: 0

Quote from: Myth888 on May 18, 2018, 07:11:31 AM

Quote from: 7h3235 on May 08, 2018, 09:30:07 AM

Hi There.

I'm fairly new to miningpoolhub, I used to use NiceHash.

I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.

It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s

Is this a normal behavor?

Thanks.

welcome to real mining. mining is based a little on luck. generally your reported speed is average miner speed. sometimes you get several shares in a short time which pool will read your speed as higher than it actually is and sometimes your unlucky and dont get a share for several mins which pool will think you have slower hashrates. Pool will only show you the actual estimated hash rate based on share.

Hi, and thanks for your answer.

I'm currently getting a rate of 24 to 26 shares/hour. But, what I'm seeing in the last couple of days is that the amount of gathered ethereum is getting lower. Today is nearly 0,002ETH/day.

I'm using Windows, and I'm giving a try to ethmonitoring, let's see.

Thanks!

BitSoftGeek

newbie

Activity: 62

Merit: 0

[ANN] zFastminer-v2.3.3 Most Powerful And Profitable Zcoin xzc Miner On Poolside For NVIDIA Pascal GPUs
***** Optimized For MiningPoolHub - Fork from tpruvot ccminer 2.2.5 *****

Update May 22th: New Version Release: zFastminer-v2.3.3

Dear friends and community memmbers,
This new update is highly recommended, we advise you to update to zFastminer-v233 for better speed (Miner & Pool), better stability and less power spikes...

Changelog:

Improved kernel ~+5% speed improvement from previews version (v2.3.2)
Miner can display now if blocks found - "...SharesAccepted:(6543/6543), BlocksFound:(1)..."
MaxNonces found per kernel launch increased up-to 3 Nonces(work->nonces[2]).
We reduced waiting time for our optimization to apply on miner launch.
Another attempt to reduce power spikes from previous version.

Nvidia GeForce 397.31 WHQL and newer drivers with CUDA 9.2 support is required to run this miner.
The optimization will only apply after 7~15 minute after program start to avoid disabling our miner Fee (1.8%).

Download zFastminer-v2.3.3

Code:

https://file.fm/f/b7dwr5vw

HAPPY MINING

zFastminer team.

For the official announcement thread:
https://bitcointalksearch.org/topic/m.33955276

siroliver

newbie

Activity: 23

Merit: 0

What is happening with zcash i finished 18 hr long session i got like nothing this place is becoming unusable im missing
zcash 1.0
Bitcoin-Gold    0.5
Monacoin    0.53
Monero    0.4
only thing working ok is Electroneum even its not show properly hash rate at least im getting credit probably missing another 2 Electroneum.

51054035    2018-05-22 04:47:41 (UTC)    Credit    Confirmed          1578074    0.00001741
51046787    2018-05-22 03:19:31 (UTC)    Credit    Orphaned          1578034    0.00001939
51041325    2018-05-22 03:07:33 (UTC)    Credit    Confirmed          1578024    0.00001527
51035707    2018-05-22 02:37:22 (UTC)    Credit    Confirmed          1578009    0.00000836
51028038    2018-05-22 02:31:10 (UTC)    Credit    Confirmed          1578003    0.00002151
51022236    2018-05-22 01:55:37 (UTC)    Credit    Confirmed          1577986    0.00003399
51016739    2018-05-22 01:48:55 (UTC)    Credit    Confirmed          1577983    0.00003476
51011217    2018-05-22 01:43:09 (UTC)    Credit    Orphaned          1577980    0.00003562
51005812    2018-05-22 01:37:54 (UTC)    Credit    Confirmed          1577977    0.00003491

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: theodrim on May 21, 2018, 05:41:11 PM

So does mph supports ssl for ethereum or not? Asking because I see that claymore devfee 'says' it's connects to mph via ssl and there was some talk about it here - but no straight yes/not answer. Yes I understand that I can just procmon/wireshare claymore and see if it's actually doing that over secure channel but I rather have answer and if not I can always do that afterwards.

I'd like a YES/NO answer to that question too.
This is probably going to be another 'maybe' answer but this is what I've found when trying to use SSL (with Claymore) when mining ETH on MPH.

If I use this config then I get connection errors:

Code:

EthDcrMiner64.exe -epool ssl://us-east.ethash-hub.miningpoolhub.com:20535 -ewal User.Worker -eworker User.Worker -esm 2 -epsw x 1 -mode 1

Errors:

Code:

Pool certificate validation failed, error #18. You can disable certificate checking with "-checkcert 0" option.
ETH: Stratum - Cannot connect to us-east.ethash-hub.miningpoolhub.com:20535
ETH: Stratum - Failed to connect, retry in 20 sec...

So I add the "-checkcert 0", and it works, so is there a problem with the SSL certificate on the MPH pool ?

Code:

EthDcrMiner64.exe -epool ssl://us-east.ethash-hub.miningpoolhub.com:20535 -ewal User.Worker -eworker User.Worker -esm 2 -epsw x 1 -mode 1 -checkcert 0

carlo_0000

legendary

Activity: 1281

Merit: 1003

Quote from: yeti666 on May 21, 2018, 08:00:22 AM

Quote from: jkminkov on May 21, 2018, 04:55:48 AM

Quote from: yeti666 on May 20, 2018, 03:50:03 AM

Why are DGB-skein and DGB-groestl two different wallets???

Can't all DGB be put in the same wallet pls?

please, can you read how to setup multi algo coins for solo mining then ask.

I know its a multi algo coin, and i know how to setup multi algo coins for mining...
I don't see how that is relevant to my question.

probably because to setup the wallet for the pool you can only use 1 algo in 1 wallet
so i guess pool have more wallet for dgb running and so cannot use the same adress

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 30. (Read 487870 times)