[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 67.

BansheeHero

newbie

Activity: 23

Merit: 0

Quote from: CryptoWaffle on January 27, 2018, 07:44:53 AM

Quote from: HavenZone on January 27, 2018, 04:53:55 AM

Does anyone from MPH actually look at this thread?

he just doesnt care anymore obviously.

Post like this is what causes people to ignore forums. Even when I am paid to read responses like this, they go way down in priority.
If you are not motivated to answer these eventually you will just give up on that group of people.

CryptoWaffle

jr. member

Activity: 187

Merit: 2

Quote from: HavenZone on January 27, 2018, 04:53:55 AM

Does anyone from MPH actually look at this thread?

he just doesnt care anymore obviously.

BansheeHero

newbie

Activity: 23

Merit: 0

Quote from: brewlig on January 26, 2018, 10:01:27 PM

Equihash GPU Miners accompanied by Awesome Miner
What's the best method for mining on Equihash algo? Use the multipool port (17xxx) and let it ride?
Add each dedicated pool in Awesome Miner and enable profit switching in AM, set your time and thresholds in the software?
Mine a specific coin and stick with it...? I'm not sure how much "down time" pool hopping actually has, how often you should swap, etc...
Any input would be greatly appreciated!
BC

I am not actually using Awesome Miner, but I aim to try it later. I am uising the DTSM's ZCash miner.
I am switching coins and it does have problems I reported before when joining MPH. I am still using it and getting roughly 15% gain to mining over at slush pool. (After fees)
I would not go with auto switching unless you plan to mine non-stop. The penalty I get from resetting difficulty is stupid.

Code:

zm.exe --server europe.equihash-hub.miningpoolhub.com --port 17023 --user user.worker--pass d=128 --time --logfile --telemetry=0.0.0.0:8080

HavenZone

jr. member

Activity: 37

Merit: 1

Does anyone from MPH actually look at this thread?

Still no answers about getting the Bitmain A3 to work on MPH... the current difficulty has gotten to the point that a GTX 1060 6gb will earn about $0.09 per day trying to mine Siacoin. It would be a waste of time for someone to try to mine with a GPU on the Blake2b algo... I am guessing that if MPH is not going to support the A3 they are going to just drop the sia pool all together. Nicehash at least answered the question just simply saying that they do not support the A3 and gave no further information about if they will. MPH should at least give a response.

brewlig

newbie

Activity: 7

Merit: 0

Equihash GPU Miners accompanied by Awesome Miner

What's the best method for mining on Equihash algo? Use the multipool port (17xxx) and let it ride?

Add each dedicated pool in Awesome Miner and enable profit switching in AM, set your time and thresholds in the software?

Mine a specific coin and stick with it...? I'm not sure how much "down time" pool hopping actually has, how often you should swap, etc...

Any input would be greatly appreciated!
BC

dgrilli

newbie

Activity: 11

Merit: 0

Hello,

in the zcoin pool I read "Time Since Last Block 8 hours 17 minutes 35 seconds" and current block is stuck at 71571.
There are no transactions since that block.
However miners continue to receive jobs regularly.

Should we continue to mine?

Thank you.

HavenZone

jr. member

Activity: 37

Merit: 1

Quote from: Nooblife on January 26, 2018, 02:02:48 PM

If anyone else is on this chain and using a Bitmain ASIC L3+, feel free to message me. Maybe we can work together to optimize our mining.

Noob.

I use Awesome Miner and the L3s never show anything from MPH so I let them go to 4 other pools.... My L3s go to zpool / hashrefinery / litcoinpool & nicehash ... all pay out about the same around $13-$18 per day... using awesome miner it will switch to the pool paying the best rates. The L3 is quickly going the way of the D3 and Bitmain had more L3s up for sale today so its only going to get worse.

Nooblife

newbie

Activity: 26

Merit: 0

If anyone else is on this chain and using a Bitmain ASIC L3+, feel free to message me. Maybe we can work together to optimize our mining.

Noob.

d0n4ald

newbie

Activity: 92

Merit: 0

Quote from: jdube on January 26, 2018, 12:33:15 PM

Quote from: d0n4ald on January 26, 2018, 11:52:15 AM

ive been mining on miningpoolhub for about a month now and i have to say its quite easy to use as a noob who just got into crypto last month.

looking to dip my foot into other pools. Ive come across altminer and lycheebit so far. what are your thoughts on them? lycheebit seems to add new coins often.

GPU or CPU mining?

i have GPU 1080ti and 1070ti...do i stick with nist5, neoscripts coins?

upon further review of lycheebit, it seems to have lower hash than otherpools...that means much longer to receive payout right?

jdube

newbie

Activity: 4

Merit: 0

Quote from: d0n4ald on January 26, 2018, 11:52:15 AM

ive been mining on miningpoolhub for about a month now and i have to say its quite easy to use as a noob who just got into crypto last month.

looking to dip my foot into other pools. Ive come across altminer and lycheebit so far. what are your thoughts on them? lycheebit seems to add new coins often.

GPU or CPU mining?

stfN2128

member

Activity: 882

Merit: 14

i have delays for withdrawing, is it already known?

I have pending transactions for digibyte and verge, Interface of mph said transactions are already confirmed but nothing is on my wallet since more than 12 hours. Regularly everything is done within minutes.

anotherwave

newbie

Activity: 39

Merit: 0

I'm getting some high ping rates on the US server again today. It's bouncing from 90ms to 9000ms just crazy...

d0n4ald

newbie

Activity: 92

Merit: 0

ive been mining on miningpoolhub for about a month now and i have to say its quite easy to use as a noob who just got into crypto last month.

looking to dip my foot into other pools. Ive come across altminer and lycheebit so far. what are your thoughts on them? lycheebit seems to add new coins often.

nerdralph

sr. member

Activity: 588

Merit: 251

The round-based share reporting is not very helpful, since it gets reset every time a block is found. Seeing a history of accepted shares submitted would be much better.

Riko87

newbie

Activity: 6

Merit: 0

Quote from: miningpoolhub on December 30, 2016, 08:50:55 AM

Quote from: Xardas2014 on December 29, 2016, 04:21:24 PM

@miningpoolhub

Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.

Server pool is restarted rarely time to time. Maybe this can affect for 1~5 minutes.
Today I restarted the pool few hours ago.

Also I would like to recommend you to upgrade your firmware if you didn't do it yet.

@miningpoolhub
Does anyone know how to set the difficulty in monero? they said to set the worker password at d = 0.01 but it seems not to change anything ..
It would seem that the minimum difficulty is 40k could you lower? my cpu can not reach that value Sad

CryptoWaffle

jr. member

Activity: 187

Merit: 2

Quote from: HavenZone on January 25, 2018, 07:14:40 PM

Quote from: mrsage on January 25, 2018, 06:06:52 PM

doesnt look like their going to fix a3's on mph. i got a email saying the a3 doesn't support mph and i need to contact bitmain to have them support it. so i guess i won't be using mph anymore.

if they are not going to support the A3 they might as well just shut down that pool now. The difficulty has more than tripled in less than 2 days. A GTX 1060 6gb is 20x slower than one A3. Mining with GPUs on Blake2b is a waste of time and money unless you are using ASIC. and the makers of the dragonmint16T announced a Blake2b ASIC miner they are releasing that does 3.5TH at only 1000W which puts the A3 to shame already so these will follow the path of the D3 and become a nice space heater in about 4-5 months.

asic is never a good news for GPU miners...

Edit: So Pascal and Decred are the best alternatives ?

Lordas

member

Activity: 142

Merit: 10

Quote from: Onbusy on January 25, 2018, 07:32:35 PM

What options besides Sia are available to dual mine on MPH? I liked mining both Eth and the dual mine coin on the same pool.
Is there any way to get a new pool added? Like Decred for dual mining?

It would be nice, but I would not expect fast if any, maybe any Pascal coin better. Have same problem here.
These asics ruined one more coin ecosystem...

Onbusy

newbie

Activity: 43

Merit: 0

What options besides Sia are available to dual mine on MPH? I liked mining both Eth and the dual mine coin on the same pool.

Is there any way to get a new pool added? Like Decred for dual mining?

andresl

newbie

Activity: 2

Merit: 0

Quote from: malthrax on January 20, 2018, 08:35:45 PM

Quote from: andresl on January 20, 2018, 07:37:58 PM

Hi guys,

I'm trying to get my last transactions for litecoin with the API, and it works for the first 30 transactions:
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]

But I need to get more than 30 transactions. Using the MiningPoolHub website, I found that there are several pages for the transactions section (note the "&start=30"):
https://litecoin.miningpoolhub.com/index.php?page=account&action=transactions&start=30

If I include the "&start=30" with the API, it shows the same transactions than the first page, and it happens with any value for "start":
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]&start=30
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]&start=60

This happens to me also for Zclassic and Zencash.

Is this an error of the API? Is there a way to get more than 30 transactions?

I could not find anything about this on the API reference (https://github.com/miningpoolhub/php-mpos/wiki/API-Reference).

Thanks in advance for the help.

No, that API won't do that, probably to prevent hundreds of people bogging down the front-end web site by doing exactly that.

If you want each and every one of your micro-cent transactions, you'll have to figure out how to write a webpage screen-scraping application on your own and do it the old fashioned way. Not sure why you feel the need to have that level of historical detail, but to each his own.

Or, you could just track your actual payouts instead.

I see, thanks for the tip. I just wanted to verify that the credits of the "Last 24 Hours" section were the exact number. But in theory it is 100% real.

HavenZone

jr. member

Activity: 37

Merit: 1

Quote from: mrsage on January 25, 2018, 06:06:52 PM

doesnt look like their going to fix a3's on mph. i got a email saying the a3 doesn't support mph and i need to contact bitmain to have them support it. so i guess i won't be using mph anymore.

if they are not going to support the A3 they might as well just shut down that pool now. The difficulty has more than tripled in less than 2 days. A GTX 1060 6gb is 20x slower than one A3. Mining with GPUs on Blake2b is a waste of time and money unless you are using ASIC. and the makers of the dragonmint16T announced a Blake2b ASIC miner they are releasing that does 3.5TH at only 1000W which puts the A3 to shame already so these will follow the path of the D3 and become a nice space heater in about 4-5 months.

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 67. (Read 487796 times)