Pages:
Author

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 71. (Read 487870 times)

newbie
Activity: 9
Merit: 0
So i put in the US server ip in my miner (45.79.223.173) with the same port and it connects to the US server and everything is running smooth. Hope this helps anyone who's still dealing with a high ping.   Grin

What is your miner? Claymore doesn’t want to accept this address for either solo-coin or autoswitch-algo
newbie
Activity: 20
Merit: 0
So i put in the US server ip in my miner (45.79.223.173) with the same port and it connects to the US server and everything is running smooth. Hope this helps anyone who's still dealing with a high ping.   Grin

Name:    us-east.equihash-hub.miningpoolhub.com
Addresses:  172.104.106.153
          139.162.66.203
          172.104.180.119
          139.162.73.35
          139.162.138.168
          172.104.127.76
          45.79.223.173
          172.104.189.59

Can we use any one of them? Either way ive seen no difference in mining results having a 200+ ping versus a 45'ish one
newbie
Activity: 39
Merit: 0
So i put in the US server ip in my miner (45.79.223.173) with the same port and it connects to the US server and everything is running smooth. Hope this helps anyone who's still dealing with a high ping.   Grin
newbie
Activity: 39
Merit: 0
It seems like us-east.equihash-hub.miningpoolhub.com isn't directing my workers to the right server for the best ping. It's still trying to send me to Germany when the US server is way better for me.  Its strange...
newbie
Activity: 43
Merit: 0
Can someone explain the deal with "donation"? There is nothing about it in FAQ or anywhere on the site? What are we donating and to whom?
How does it affect the fee, if at all?

Yes, it might arrive today/tomorrow, as I live just a few miles from where they ship out in China. But, I want to get MPH to state for sure that the Sia pool takes ASIC's, it is not clear. I think NiceHash will work, but I prefer to use MPH.
sr. member
Activity: 574
Merit: 261
With all the refugees from Nicehash camping out on MPH I think what I'm about to request may be low down on the list of MPH's priorities, but could more NeoScrypt coins be added to the pool such as Vivo(VIVO), GoByte(GBX) or Trezarcoin(TZC), the only one there is Feathercoin and it's a bit pants.
newbie
Activity: 27
Merit: 0
Can someone explain the deal with "donation"? There is nothing about it in FAQ or anywhere on the site? What are we donating and to whom?
How does it affect the fee, if at all?
jr. member
Activity: 187
Merit: 2

MPH Sia pool will support the Antminer A3 ASIC?

you ordered one too ?
newbie
Activity: 182
Merit: 0
Where problem? work great 2-3 weeks ago. Now same on all zcoin pools

[2018-01-21 11:42:16] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com
[2018-01-21 11:42:16] ...retry after 30 seconds

Code:
nslookup europe.lyra2z-hub.miningpoolhub.com
Server:  RT-AC88U-8310
Address:  192.168.1.1

Non-authoritative answer:
Name:    europe.lyra2z-hub.miningpoolhub.com
Addresses:  172.104.76.21
          139.162.65.177
          45.79.210.48
          45.79.200.97
          172.105.210.117
          172.104.241.136
          172.105.210.116
          139.162.46.14
          172.104.143.224
          172.104.250.141
          139.162.60.220
          45.79.207.32
          172.104.151.232
          172.104.148.42
          172.104.247.21
          139.162.132.70
          45.79.217.166
          172.105.205.58
          45.79.204.241
          172.104.252.176
          172.105.205.68
          172.104.49.55
          172.104.159.158
          172.105.235.97
          45.79.192.137
          172.104.224.250
          172.104.126.71
          172.104.94.15

no issues over here, maybe your ISP is shitty?
newbie
Activity: 43
Merit: 0

MPH Sia pool will support the Antminer A3 ASIC?
newbie
Activity: 12
Merit: 0
newbie
Activity: 35
Merit: 0
Will BTC transaction fee be lowered now that network fees are returning to "normal" levels ?
member
Activity: 140
Merit: 10
Where problem? work great 2-3 weeks ago. Now same on all zcoin pools

[2018-01-21 11:42:16] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com
[2018-01-21 11:42:16] ...retry after 30 seconds

All servers are fcu**ed up, and @miningpoolhub sits quetly about this... Think about how much rejected shares you got when ping on mph servers is anything between 300-1000 ms last days.

RYK
newbie
Activity: 32
Merit: 0
Where problem? work great 2-3 weeks ago. Now same on all zcoin pools

[2018-01-21 11:42:16] Stratum connection failed: Could not resolve host: europe.lyra2z-hub.miningpoolhub.com
[2018-01-21 11:42:16] ...retry after 30 seconds
newbie
Activity: 9
Merit: 0
You should see that in Balances section. Also i recommend miningpoolhubstats.com which is great and fast way to track your progress.

Thanks! Trying it out now.
(No log in link takes to 404 page LOL). Well, will be one more login to store.

As to MPH’s Balances page - VERY delayed info (IMHO that is anyway)...


Is it me? There is no Worker Stats on miningpoolhubstats.com
But then again, I cannot see my hashrate on MPH itself for the second day (could be longer,but it is only second day I use Algo-Switch; before was a single-coin mining, which was showing the hashrate more or less aaccurate)


Manually add each of your worker(s) to the "Workers" page of every coin your're auto-switching between.

Yes it sucks.  Yes, you shouldn't have to .  Just do it and get it over with.  You can thank us later.

FYI - miningpoolhubstats.com is a FAN SITE and is in NO WAY affiliated with MiningPoolHub.com   If you have issues with miningpoolhubstats.com, open a ticket on THAT web site.


Thanks! EDIT: It worked!!! Thanks again!
And since I didn’t believe it is miningpoolhubstats.com fault, looks like I raised the question in the right place Wink
newbie
Activity: 182
Merit: 0
You should see that in Balances section. Also i recommend miningpoolhubstats.com which is great and fast way to track your progress.

Thanks! Trying it out now.
(No log in link takes to 404 page LOL). Well, will be one more login to store.

As to MPH’s Balances page - VERY delayed info (IMHO that is anyway)...


Is it me? There is no Worker Stats on miningpoolhubstats.com
But then again, I cannot see my hashrate on MPH itself for the second day (could be longer,but it is only second day I use Algo-Switch; before was a single-coin mining, which was showing the hashrate more or less aaccurate)

Manually add each of your worker(s) to the "Workers" page of every coin your're auto-switching between.

Yes it sucks.  Yes, you shouldn't have to .  Just do it and get it over with.  You can thank us later.


FYI - miningpoolhubstats.com is a FAN SITE and is in NO WAY affiliated with MiningPoolHub.com   If you have issues with miningpoolhubstats.com, open a ticket on THAT web site.
newbie
Activity: 9
Merit: 0
You should see that in Balances section. Also i recommend miningpoolhubstats.com which is great and fast way to track your progress.

Thanks! Trying it out now.
(No log in link takes to 404 page LOL). Well, will be one more login to store.

As to MPH’s Balances page - VERY delayed info (IMHO that is anyway)...


Is it me? There is no Worker Stats on miningpoolhubstats.com
But then again, I cannot see my hashrate on MPH itself for the second day (could be longer,but it is only second day I use Algo-Switch; before was a single-coin mining, which was showing the hashrate more or less aaccurate)
newbie
Activity: 182
Merit: 0

Jesus, this pool is plagued with so many problems, and the pool OP is virtually silent about all of it - only some brief messages every now and then, but not addressing nearly all the important complaints.

Why are so many people still using this pool? Did it use to work perfectly in the past and it only now started to have problems all of a sudden?

Is there a good alternative to this pool which can do auto-switching on the same algorithm (not between algorithms)? I only know of zpool.ca but that has ridiculous fees and few coins per al

Dunno where you get that "Zpool has ridiculous fees".  The fees there are inline with most other established pools, PLUS they PAY the withdrawl transaction fees, unlike MPH.
newbie
Activity: 64
Merit: 0
Jesus, this pool is plagued with so many problems, and the pool OP is virtually silent about all of it - only some brief messages every now and then, but not addressing nearly all the important complaints.

Why are so many people still using this pool? Did it use to work perfectly in the past and it only now started to have problems all of a sudden?

Is there a good alternative to this pool which can do auto-switching on the same algorithm (not between algorithms)? I only know of zpool.ca but that has ridiculous fees and few coins per al

Because I've had no problems at all. I mine straight Zclassic and have been doing so for over a month. I check my balance daily and it matches or exceeds what whattomine.com shows i should be making.

My rig is on autopilot. I SSH in once a day to make sure it's working and that's it. I check this thread more than my rig and get a good laugh at the newbs that can't get their shit working correctly.
newbie
Activity: 182
Merit: 0
Hi guys,

I'm trying to get my last transactions for litecoin with the API, and it works for the first 30 transactions:
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]

But I need to get more than 30 transactions. Using the MiningPoolHub website, I found that there are several pages for the transactions section (note the "&start=30"):
https://litecoin.miningpoolhub.com/index.php?page=account&action=transactions&start=30

If I include the "&start=30" with the API, it shows the same transactions than the first page, and it happens with any value for "start":
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]&start=30
https://litecoin.miningpoolhub.com/index.php?page=api&action=getusertransactions&api_key=[API_KEY_HERE]&start=60

This happens to me also for Zclassic and Zencash.

Is this an error of the API? Is there a way to get more than 30 transactions?

I could not find anything about this on the API reference (https://github.com/miningpoolhub/php-mpos/wiki/API-Reference).

Thanks in advance for the help.

No, that API won't do that, probably to prevent hundreds of people bogging down the front-end web site by doing exactly that.

If you want each and every one of your micro-cent transactions, you'll have to figure out how to write a webpage screen-scraping application on your own and do it the old fashioned way.  Not sure why you feel the need to have that level of historical detail, but to each his own.


Or, you could just track your actual payouts instead.
Pages:
Jump to: