[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 68.

HavenZone

jr. member

Activity: 37

Merit: 1

Quote from: mrsage on January 25, 2018, 05:06:52 PM

doesnt look like their going to fix a3's on mph. i got a email saying the a3 doesn't support mph and i need to contact bitmain to have them support it. so i guess i won't be using mph anymore.

nicehash said the same... very limited on what pools you can use the A3 on and the diff has shot up over the last two days with all of them going online. I was seeing close to $500 per day now down to $250ish

mrsage

newbie

Activity: 3

Merit: 0

doesnt look like their going to fix a3's on mph. i got a email saying the a3 doesn't support mph and i need to contact bitmain to have them support it. so i guess i won't be using mph anymore.

jdube

newbie

Activity: 4

Merit: 0

So I didn't get any responses to my initial request, so let me elaborate.

I am looking to put a few of my CPU mining machines on Mining Pool Hub. Current they mine Electroneum on another pool system but I would like to mix it up. I'd like to use the auto switching so it mines whatever cryptonight coin is most profitable and then pays me in my coin of choice.

If I am using XMR CPU or something like this, how would I setup it up? So for instance, right now if I am using Wolfs cpuminer its 'minerd -q -a cryptonight -o -u -p x -t XXXX' .... if I understand correctly I use my username.workID for the wallet but what pool do I use? Do workers auto populate in the list? I mined to the cryptonifht pool earlier (not auto switching) and had a couple of shares but they never showed up.

CryptoWaffle

jr. member

Activity: 187

Merit: 2

Quote from: anotherwave on January 25, 2018, 02:18:11 PM

Does anyone know what the "monitor" worker on/off actually does in the worker configuration area? Huh

Will i get a email if a worker goes down or what? there's no info on that anywhere..

yes

anotherwave

newbie

Activity: 39

Merit: 0

Does anyone know what the "monitor" worker on/off actually does in the worker configuration area? Huh

Will i get a email if a worker goes down or what? there's no info on that anywhere..

justoiurii

newbie

Activity: 103

Merit: 0

Hello everyone.
Recently i have lower eth hashrate than before, 20 mh vs 30 mh while other Ethash's coins OK. Only different ports. I'm using claymore for my AMD rig. Could someone tell me why?

professorkuusamo

newbie

Activity: 14

Merit: 0

dont connect to pool electronium,socket error. 3 of 11 rigs.same place,router and soft.

HavenZone

jr. member

Activity: 37

Merit: 1

Quote from: denton_12 on January 25, 2018, 01:35:45 AM

Quote from: windgodyang on January 25, 2018, 01:32:22 AM

antminer A3 cannot connect normally to server Sad

I think we have a Vardiff maximum difficulty issue. From how things look, the minimum difficulty on the siacoin pool is set to 1. I think A3s are solving so many diff 1 shares so fast that the server is disconnecting thinking it's a flood.

Miningpoolhub, any way you can look at this? Siacoin is in desperate need of pool diversity right now.

My A3 is getting 127 difficulty from other pools.

mine are doing both 512 and 127 diff and working fine on another pool. Can't get it to connect to MPH or Nicehash... if I put MPH in the config it wont even start the miner even for the failover pools. It would be great if they get MPH to work so I can use the auto exchange instead of mining to an exchange and have to move it myself.

denton_12

newbie

Activity: 27

Merit: 0

Quote from: windgodyang on January 25, 2018, 01:32:22 AM

antminer A3 cannot connect normally to server Sad

I think we have a Vardiff maximum difficulty issue. From how things look, the minimum difficulty on the siacoin pool is set to 1. I think A3s are solving so many diff 1 shares so fast that the server is disconnecting thinking it's a flood.

Miningpoolhub, any way you can look at this? Siacoin is in desperate need of pool diversity right now.

My A3 is getting 127 difficulty from other pools.

windgodyang

newbie

Activity: 13

Merit: 0

antminer A3 cannot connect normally to server Sad

mrsage

newbie

Activity: 3

Merit: 0

Been trying to get my antminer a3 working on mph for siacoin but no luck. I've tried port 17022 and 20550 both connect only for a few seconds then disconnect. I don't have this problem on other pools and also don't have this problem connecting a l3+ to mph. A bunch of people seem to have this problem on reddit. If anyone knows a solution let me know. I also tried setting the difficulty manually in the password field but maybe it's the wrong setting didn't seem to change anything though.

sambonator

newbie

Activity: 9

Merit: 0

Quote from: MikeJones! on January 24, 2018, 05:48:12 PM

Quote

Autoswitch and multialgo switch seems to be stuck on MPH... hasnt changed in quite a while now...
I think I'll script my own switch based on whattomine json output.

Seeing the same thing here, it's like the 120xx ports are not following the profitability from the front page.

All multialgo switches that have neoscrypt are stuck mining feathercoin using neoscrypt.

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: forexmir on January 24, 2018, 03:35:14 PM

can I bring this pool electroneum directly to the exchange cryptopia?

мoжнo ли c этoгo пyлa вывecти electroneum (etn) нaпpямyю нa биpжy кpиптoпия?

You can send Electroneum from your MiningPoolHub wallet to Cryptopia.
I mine Electronium to MiningPoolHub, when I have mined enough Electroneum I send it to Cryptopia either manually or let the auto-payout do it for me.

You have to be careful and get the address format correct, it is Address.PaymentID , the "." between Address and PaymentID is required.
Here is an example:

Code:

etnjzKFU6ogESSKRZZbdqraPdcKVxEC17Cm1Xvbyy76PARQMmgrgceH4krAH6xmjKwJ3HtSAKuyFm1BBWYqtchtq9tBap8Qr4M.9112dcfd10bfda2046f9eb1cd1a375e252419054959b33f44031a9431acf0af6

edwin32ms

newbie

Activity: 2

Merit: 0

Friends,
I am a newbie trying to mining verge coin using Antminer L3+ (asic) using a scrypt algo.

Any advice on how to set it up?
Need some guidance please..

cryptapus

hero member

Activity: 626

Merit: 504

Greetings!

A required update for Myriadcoin has been released:

https://www.reddit.com/r/myriadcoin/comments/7sp184/myriadcoin_01425/

Please update your pool at your earliest convenience.

MikeJones!

member

Activity: 74

Merit: 10

Quote

Autoswitch and multialgo switch seems to be stuck on MPH... hasnt changed in quite a while now...
I think I'll script my own switch based on whattomine json output.

Seeing the same thing here, it's like the 120xx ports are not following the profitability from the front page.

sambonator

newbie

Activity: 9

Merit: 0

Quote from: anotherwave on January 24, 2018, 02:20:30 PM

Quote from: GoldMines on January 24, 2018, 12:22:44 PM

Hi everyone,
does anyone know, how long MPH will "work" such unpredictable?

So whats wrong with MPH currently? Or is it only me, who is loosing money there the last few days?

Is there a possibility we get an information, when MPH works again correctly? When we can trust it again, and do not have to verify its behaviour for each and every TX?

I've been mining zclassic and it's been all good for me. I haven't used the auto exchange so i can't speak on that but if you do have a real concern of missing coins this forum won't help you... there must be some "contact us" link on the website you can use..

From the main page www.miningpoolhub.com:
CONTACT
Contact miningpoolhub for private account verification, server error reports only. General questions should be asked on community and forum.
Twitter @MiningPoolHub
Email [email protected]

forexmir

newbie

Activity: 8

Merit: 0

can I bring this pool electroneum directly to the exchange cryptopia?

мoжнo ли c этoгo пyлa вывecти electroneum (etn) нaпpямyю нa биpжy кpиптoпия?

anotherwave

newbie

Activity: 39

Merit: 0

Quote from: GoldMines on January 24, 2018, 12:22:44 PM

Hi everyone,
does anyone know, how long MPH will "work" such unpredictable?

So whats wrong with MPH currently? Or is it only me, who is loosing money there the last few days?

Is there a possibility we get an information, when MPH works again correctly? When we can trust it again, and do not have to verify its behaviour for each and every TX?

I've been mining zclassic and it's been all good for me. I haven't used the auto exchange so i can't speak on that but if you do have a real concern of missing coins this forum won't help you... there must be some "contact us" link on the website you can use..

CryptoWaffle

jr. member

Activity: 187

Merit: 2

Quote from: GoldMines on January 24, 2018, 12:22:44 PM

Hi everyone,
does anyone know, how long MPH will "work" such unpredictable?

So whats wrong with MPH currently? Or is it only me, who is loosing money there the last few days?

Working fine on my side and dont expect anyone to reply to your concerns. The "owner" just dont care apparently.

Im pretty sure any other pool could replace MPH only by adding a minimum customer support and lower some silly fees it has.
It must take a lot of work to have such a good Auto Exchange system since no one else has one.

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 68. (Read 487870 times)