Pages:
Author

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 94. (Read 487796 times)

jr. member
Activity: 201
Merit: 1
No, i just tried MPHGeopool again... No rewards...  Huh Huh

Does anyone mine Geocoin on MPH (as single coin, not auto switch) and get rewards?

Payouts are calculated, but GEO wallet is empty.

Anyone from MPH can please let us know if all is ok?
Thank you.

There are no rewards for geocoin when using the autoswitch feature too. The pool finds blocks, but no payouts are credited. So at this time, no rewards at all when mining the most profitable Qubit-Coin...

Wrote an eMail to the pool operator, but no answer so far. So when using auto switch for Baikal X10 you guys should switch to the Myriad-Groestl and Skein only setting as long as the pool operator doesnt tell us whats wrong. It looks like there are no payouts for Geocoin at the moment.
full member
Activity: 374
Merit: 101
No, i just tried MPHGeopool again... No rewards...  Huh Huh

Does anyone mine Geocoin on MPH (as single coin, not auto switch) and get rewards?

Payouts are calculated, but GEO wallet is empty.

Anyone from MPH can please let us know if all is ok?
Thank you.
newbie
Activity: 17
Merit: 0
Made this account to give a bit of feedback on this pool.
I've recently (1 week or so) found this pool and am extremely pleased with it so far. Used to use flypool (ok) and some other  pool that shall not be named for BTG, and was very unhappy with it. My rig is now on equihash auto-switch and so far profits have increased significantly and are coming in reliably. Yes there is a learning curve coming from a normal pool with all the auto-switching and algo switching and auto-exchange, but after you do your due diligence and read a little it all makes sense.
The interface even now is beautiful compared to the shitshow on the other pool, and while it does need a bit of unifying, I see that the Op is working on it and in the meantime there is miningpoolhubstats or you can just do 5 mins of calculating and figure it out on your own.

To the new joiners to the pool, I would suggest you give yourself a few days to figure it out and for things like the the auto-exchange to settle in, before complaining. This seems like one of the better pools out there.

Thanks Op!


I agree with this post, I tried several different pools as I learned and trial'ed and error'ed my way to learning mining.  This pool seems fairly stable and it needs to be said that it would be a good idea to give it a few days to get a realistic idea of earnings.  Coins being auto-exchanged take a bit of time to go from your wallet to the exchange and then get your coins back which causes fluctuation in your earnings and balances. 

Another consideration is the fact that the coins value can vary, so while you may earn 10 coins of one which would be worth say $10 for simplicity sake, if the value of that coin drops, your earnings overall drop if the coin has already exchanged, and if it drops before the exchange you may get more coins than you expected due to the price change. 
jr. member
Activity: 201
Merit: 1
No, i just tried MPHGeopool again... No rewards...  Huh Huh

Does anyone mine Geocoin on MPH (as single coin, not auto switch) and get rewards?
full member
Activity: 374
Merit: 101
I mined Geocoin at MPH for several hours today. The pool and myself found blocks. The workers page and the dashboard showed my workers and my hashrate. But there is no reward. Did anyone else have this problem?

Same here.

It should take 160 confirmations.

Well, i did not get any rewards at all. Also no unconfirmed rewards...

Did you try other GEO pools too?
jr. member
Activity: 201
Merit: 1
I mined Geocoin at MPH for several hours today. The pool and myself found blocks. The workers page and the dashboard showed my workers and my hashrate. But there is no reward. Did anyone else have this problem?

Same here.

It should take 160 confirmations.

Well, i did not get any rewards at all. Also no unconfirmed rewards...
full member
Activity: 374
Merit: 101
I mined Geocoin at MPH for several hours today. The pool and myself found blocks. The workers page and the dashboard showed my workers and my hashrate. But there is no reward. Did anyone else have this problem?

Same here.

It should take 160 confirmations.
jr. member
Activity: 201
Merit: 1
I mined Geocoin at MPH for several hours today. The pool and myself found blocks. The workers page and the dashboard showed my workers and my hashrate. But there is no reward. Did anyone else have this problem?
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Is it me or the pools has problem?

Code:
2018-01-03 14:47:32|#  connect to europe.equihash-hub.miningpoolhub.com:20595 failed


Cant connect to any mph pool

Almost none are accessible

Code:
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20595
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20595 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 17023
nc: connect to us-east.equihash-hub.miningpoolhub.com port 17023 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20575
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20575 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20570
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20570 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20594
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20594 (tcp) timed out: Operation now in progress




everything is fine here.

Whatever the problem was, its ok now
newbie
Activity: 11
Merit: 0
Made this account to give a bit of feedback on this pool.
I've recently (1 week or so) found this pool and am extremely pleased with it so far. Used to use flypool (ok) and some other  pool that shall not be named for BTG, and was very unhappy with it. My rig is now on equihash auto-switch and so far profits have increased significantly and are coming in reliably. Yes there is a learning curve coming from a normal pool with all the auto-switching and algo switching and auto-exchange, but after you do your due diligence and read a little it all makes sense.
The interface even now is beautiful compared to the shitshow on the other pool, and while it does need a bit of unifying, I see that the Op is working on it and in the meantime there is miningpoolhubstats or you can just do 5 mins of calculating and figure it out on your own.

To the new joiners to the pool, I would suggest you give yourself a few days to figure it out and for things like the the auto-exchange to settle in, before complaining. This seems like one of the better pools out there.

Thanks Op!




full member
Activity: 224
Merit: 100
Is it me or the pools has problem?

Code:
2018-01-03 14:47:32|#  connect to europe.equihash-hub.miningpoolhub.com:20595 failed


Cant connect to any mph pool

Almost none are accessible

Code:
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20595
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20595 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 17023
nc: connect to us-east.equihash-hub.miningpoolhub.com port 17023 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20575
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20575 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20570
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20570 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20594
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20594 (tcp) timed out: Operation now in progress




everything is fine here.
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Is it me or the pools has problem?

Code:
2018-01-03 14:47:32|#  connect to europe.equihash-hub.miningpoolhub.com:20595 failed


Cant connect to any mph pool

Almost none are accessible

Code:
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20595
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20595 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 17023
nc: connect to us-east.equihash-hub.miningpoolhub.com port 17023 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20575
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20575 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20570
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20570 (tcp) timed out: Operation now in progress
m1@m1-desktop-101:~$ nc -vzw1  us-east.equihash-hub.miningpoolhub.com 20594
nc: connect to us-east.equihash-hub.miningpoolhub.com port 20594 (tcp) timed out: Operation now in progress


hero member
Activity: 700
Merit: 500
All workers are missing for (at least) equihash based coins in the web stats (either via web page or api), ether/dagger based coins are fine though.

Anybody experienced this yet?
newbie
Activity: 12
Merit: 0
All fine here:


Code:
ZEC: 01/03/18-11:47:28 - New job from europe.equihash-hub.miningpoolhub.com:17023
full member
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
Is it me or the pools has problem?

Code:
2018-01-03 14:47:32|#  connect to europe.equihash-hub.miningpoolhub.com:20595 failed


Cant connect to any mph pool
full member
Activity: 258
Merit: 104
Hi,

I've been mining Equihash and auto-exchanging to ZClassic, has been working fine.
Today I changed the auto-exchange to Ethereum and manually went into my Zclassic Wallet and clicked on the transfer button in order to get them Auto-Exchanged to Ethereum.
At the moment the Zclassic wallet has 0 balance both regular and deposited for auto-exchange. I still see Bitcoin Gold and Zencash with a bit of balance waiting to be auto-exchanged.
But the ZClassic just disappeared...

Should I just wait or something is wrong?


Thx.


Just wait.
newbie
Activity: 12
Merit: 0
Hi,

I've been mining Equihash and auto-exchanging to ZClassic, has been working fine.
Today I changed the auto-exchange to Ethereum and manually went into my Zclassic Wallet and clicked on the transfer button in order to get them Auto-Exchanged to Ethereum.
At the moment the Zclassic wallet has 0 balance both regular and deposited for auto-exchange. I still see Bitcoin Gold and Zencash with a bit of balance waiting to be auto-exchanged.
But the ZClassic just disappeared...

Should I just wait or something is wrong?


Thx.
full member
Activity: 224
Merit: 100
I am connected to port 17023 for equihash, and it had been mining equihash, but not always what the hub says it is mining. For example, zclassic is the most profitable, and that it's what the hub says for equihash, but my money is mining zencash. It does switch around, so it seems to be connected right. Please help, thanks
 

try https://miningpoolhubstats.com/USD/PUT YOUR API KEY HERE

gives much better stats as to whats going on on mhp

Im certainly not getting the amount it says I should receive. Not even close
newbie
Activity: 64
Merit: 0
Yeah, pretty hard to manage stats... How do you guys monitor miners on miningpoolhub? Monitor function is pretty useless if auto-switch is working. I used monitor app on my phone and it would work fine with single coin, but not multi... Also DSTM is not reporting status, so i just lost few hours on one of rigs.

Any possibility to monitor live workers on HUB? Or i should find solution to monitor miners locally?

I check miningpoolhubstats.com throughout the day but I don't actively monitor the mining rig.  I just have MPH convert everything to LTC and have it transferred out once it hits my defined threshold.  Basically a fire and forget weapon.  I don't see a need to live monitor my rig.  Stable as a rock.
newbie
Activity: 64
Merit: 0
I still find https://miningpoolhubstats.com a bit confusing...
My workers do not show (not all of them), but they show up on MPH.

Also under 24h payouts it shows all the balances of all the wallets.
But if I set up autoexchange to trade everything to lets say Bitcoin Cash, it shows the highest balance in Bitcoin cash.
Is it right to add this wallets payout balance to the others, as the others are exchanged to it, so does it count double?

I hope I made clear what I mean, anybody have an direction how to estimate profits more exactly?

Thanks

If you are autoconverting everything to BCH, then just check your BCH balance every day at the same time.  That will give you a very good idea on where you are.
Pages:
Jump to: