[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 89.

Biggen1

newbie

Activity: 64

Merit: 0

Quote from: CryptAtomeTrader44 on January 07, 2018, 08:50:10 AM

Quote from: papampi on January 07, 2018, 01:40:54 AM

Is ZCL pool going to become BTCP pool after hard fork?
And If we have ZCL in our MPH wallet do we get BTCP after hard fork?

I also asked myself this question, and I think so, but there is also this case of BTCP fork of BTC. Because BTCP is a Bitcoin fork and a Zclassic Fork.

Last time, MPH paid in BTG, but I think it would be more productive to put them on platforms that will accept the fork. however, it seems that Btrex has not added anything for months and many others are overwhelmed by the magnitude of global demand growth.
Cryptopia can be and one or two other altcoins tradding specialist, but the BTCP page does not seem to indicate much to this porpos and their Wallet BTCP is planned for in a few hours.

Patience and Frastrations

I plan to just move my ZClassic out of MPH when the new Zclassic wallet comes out on the 8th. That way, I don't have to rely on MPH doing anything for me at all.

grostim

newbie

Activity: 26

Merit: 0

Quote from: CryptAtomeTrader44 on January 07, 2018, 08:44:38 AM

Quote from: grostim on January 07, 2018, 08:33:24 AM

Quote from: grostim on January 06, 2018, 03:01:28 PM

Hello everybody, Hello @MiningPoolHub team,

2 questions:
- Is it possible to know the the ratios used to "normalized" the profit of each algo for Nvidia, and AMD ?
- Is it possible to set custom profitability ratio (in a similar way as Yiimp) ?

bump !
Can i have an answer ?

I think you'll have an answer if you explain with more details your questions.

Ok, I'll try to clarify:

On this page: https://miningpoolhub.com/?page=home&normalize=nvidia
You can see the profitabily of each algo for NVIDIA cards. I assume that this is calculated by using the BTC/GH/Day ratio (you can find it here: https://miningpoolhub.com/?page=home&normalize=none ) and by adjusting this with a "profitability factor" for each algo. This profitability factor reflect the efficiency of nvidia cards for each algo. If you select AMD, the factor are obviously not the same.
So, my first question was: Is it possible to have the details of these ratios.

Second questions:
With the yiimp base pool, you can use "tailor-made" ratios in order to make it perfectly adjusted to your specific rig. (for example, see here: http://pool.hashrefinery.com/site/multialgo )
Is there a similar option with MPH ?

CryptAtomeTrader44

full member

Activity: 340

Merit: 103

It is easier to break an atom than partialities AE

Quote from: papampi on January 07, 2018, 01:40:54 AM

Is ZCL pool going to become BTCP pool after hard fork?
And If we have ZCL in our MPH wallet do we get BTCP after hard fork?

I also asked myself this question, and I think so, but there is also this case of BTCP fork of BTC. Because BTCP is a Bitcoin fork and a Zclassic Fork.

Last time, MPH paid in BTG, but I think it would be more productive to put them on platforms that will accept the fork. however, it seems that Btrex has not added anything for months and many others are overwhelmed by the magnitude of global demand growth.
Cryptopia can be and one or two other altcoins tradding specialist, but the BTCP page does not seem to indicate much to this porpos and their Wallet BTCP is planned for in a few hours.

Patience and Frastrations

CryptAtomeTrader44

full member

Activity: 340

Merit: 103

It is easier to break an atom than partialities AE

Quote from: grostim on January 07, 2018, 08:33:24 AM

Quote from: grostim on January 06, 2018, 03:01:28 PM

Hello everybody, Hello @MiningPoolHub team,

2 questions:
- Is it possible to know the the ratios used to "normalized" the profit of each algo for Nvidia, and AMD ?
- Is it possible to set custom profitability ratio (in a similar way as Yiimp) ?

bump !
Can i have an answer ?

I think you'll have an answer if you explain with more details your questions.

grostim

newbie

Activity: 26

Merit: 0

Quote from: grostim on January 06, 2018, 03:01:28 PM

Hello everybody, Hello @MiningPoolHub team,

2 questions:
- Is it possible to know the the ratios used to "normalized" the profit of each algo for Nvidia, and AMD ?
- Is it possible to set custom profitability ratio (in a similar way as Yiimp) ?

bump !
Can i have an answer ?

meikel46

newbie

Activity: 8

Merit: 0

Quote from: alanon09 on January 07, 2018, 07:32:37 AM

Equilhash pool ping 58ms today up to 312ms all time. The problem is not on the Internet.

Mining Pool Hub: ping up to 300
Suprnova.cc: only 50

alanon09

newbie

Activity: 9

Merit: 0

Equilhash pool ping 58ms today up to 312ms all time. The problem is not on the Internet.

adore

newbie

Activity: 44

Merit: 0

Quote from: ssmokeyy on January 07, 2018, 01:01:23 AM

What do u think the avg btc payout per day should be with 6 1070ti, and 6 rx580's ? It's been running 24 hours now and all I have gotten back is .002 btc.

let it run at least another 24h hours, auto exchange process' take 6h+
see the amount/day in the bitcoin dashboard and not in the balance

voltsifer

newbie

Activity: 12

Merit: 0

Quote from: jp26jp on January 07, 2018, 02:21:20 AM

Where is the list of ports for multi-algo switching?

https://miningpoolhub.com/?page=gettingstarted

jp26jp

newbie

Activity: 14

Merit: 0

Where is the list of ports for multi-algo switching?

deg026

newbie

Activity: 25

Merit: 0

equilhash pool down?

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Is ZCL pool going to become BTCP pool after hard fork?
And If we have ZCL in our MPH wallet do we get BTCP after hard fork?

ssmokeyy

member

Activity: 88

Merit: 11

What do u think the avg btc payout per day should be with 6 1070ti, and 6 rx580's ? It's been running 24 hours now and all I have gotten back is .002 btc.

Rhyn0

newbie

Activity: 11

Merit: 0

A few days ago I had switched the auto-exchange to Zcash(ZEC). wallet went under maintenace in exchange and nothing came back, about an hour or so I received about 2,5 pages of autoexchange transactions, and although you can't set the autoexchange to ZEC and dashboard still says it's off, it seems things are starting moving again..

Quote from: KaydenC on January 06, 2018, 08:35:00 AM

I'm running equihash algo auto switch. Is there a way to get an email notification when the worker goes down? Also I don't see graphs for the worker when using algo auto switch. Is it possible to see graphs when using algo auto switch?

https://miningpoolhubstats.com/USD/your-MPHapikey-here
Graphs you can open all the 4 coin pages to the graphs section, but with the algo switching it's not very accurate, as it takes time to show. best thing I found is to use the stats page graph section and see how you do over several days.
If you create an account you can set some options as to remove the auto-exchange coin so things don't get counted twice etc.

Hope it helps.

for miner watcher I found this which is absolutely amazing and has removed all my miner troubles:
https://bitcointalksearch.org/topic/cmd-farmwatchbot-ewbf-claymore-bminer-dstm-cc-eth-castxmr-phoenix-2071108 (Acrefawn's Equihash Miner Autorun (Autorestart / Watchdog) for Ewbf & Claymore & Dstm)

Has Telegram bot which can send you hourly updates and messages when things go wrong, etc. Love it so far.

krazycanuck2011

newbie

Activity: 4

Merit: 0

Can anyone help with my DGB autopayment issue from my post #6009 ?

SiegeBreaker

newbie

Activity: 26

Merit: 0

Quote from: malthrax on January 06, 2018, 02:58:29 PM

Quote from: SiegeBreaker on January 06, 2018, 02:11:49 PM

Quote from: jackbox on January 06, 2018, 01:28:40 PM

Quote from: SiegeBreaker on January 06, 2018, 01:07:49 PM

@miningpoolhub, all my ETH balance is missing, can you please look into what happened?

See evidence in this album: https://imgur.com/a/wzKUP, I haven't made any withdrawals for over 2 weeks but my balance reset this morning, any idea why?

PM me if you need more data than just the TX IDs in the pictures. Thanks!

The coins were debited to auto exchange (you can see that in your second photo). What coin are you exchanging into? Go look there. For a short time while the coins are at the exchange they do "disappear" and reappear once in your exchange coin wallet once the exchange has completed. Also click on balances and see which coins have a balance.

@jackbox, look at the dates, the last debit_AE transactions were from Dec 23. I am looking for all my income since then.

Top of the page... https://miningpoolhub.com/?page=account&action=balances

- Temporarily 279 user's ETH balances are not showing correct numbers due to DB data migration. All things are logged so will soon back to normal. Please wait awhile.

Thanks @malthrax, I guess I am one of the lucky 279, I guess I will just 'wait awhile'... Tongue

vpp

newbie

Activity: 1

Merit: 0

Any chance to see a Verge(Lyra2RE2) pool soon?
I know you already have Verge(Scrypt) but for NVIDIA cards this algo is nogo.

krazycanuck2011

newbie

Activity: 4

Merit: 0

Hi all I accidently sent DGb to the wrong wallet via an autopayment while mining. I have all the details from miningpool. They are just endlessly in the blockchain. My friend sent BCH to a BTC by accident and had it mined out for a fee. I am wondering if something exists for dgb to do this. I have reached out to miningpool but no response on the matter....

MegoBasha

newbie

Activity: 65

Merit: 0

there is announcement at the pool
Temporarily 279 user's ETH balances are not showing correct numbers due to DB data migration. All things are logged so will soon back to normal. Please wait awhile.

graph showed more than 5 hours
it not just the balance is not showed but i think it affected the miner prog too
it affected min
keep restarting, lower total share number

then the pool doesn't have to pay

or I'm mistaking?
thanks
Mego

ssmokeyy

member

Activity: 88

Merit: 11

Is mph working normal? I have been mining for over 12 hours and no coins have been changed in to btc yet? I have coins going to the exchange and gone off my list but none have come back as btc.

Topic: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin. - page 89. (Read 487870 times)