Is there a windows binary available of the latest client? i do not have a windows dev environment setup at the moment.
Alternatively i would be happy with a mac binary.
Topic: [ANN][RIC] Riecoin: constellations POW *CPU* HARD FORK successful, world record - page 199. (Read 685362 times)
March 17, 2014, 05:01:46 PM
March 17, 2014, 05:01:41 PM
[00:00:00] 2ch/s: 0.0000 3ch/s: 0.0000 4ch/s: 0.0000 Shares total: 0 / 0
Killed
Killed
Did it run out of memory?
...Yup that's it. RAM usage has been low up to this point so I only had 4GB allocated. I set it to 8GB and it's fine now using 78%.
March 17, 2014, 05:00:44 PM
why mine in a pool before the patch comes out?
Thanks, a00k for the optimized open source solo miner!
- People with optimized miners only search for shares, while you search mostly for blocks
- You get to pay 10% fees
- Your mining software is not as optimized as solo miners
Thanks, a00k for the optimized open source solo miner!
March 17, 2014, 04:39:04 PM
[00:00:00] 2ch/s: 0.0000 3ch/s: 0.0000 4ch/s: 0.0000 Shares total: 0 / 0
Killed
Killed
Did it run out of memory?
Probably. I'll get a memory-detuned version up, but for now, try running with fewer threads.
Actually, instead of that, I'm going to spend the time tonight letting it be specified on the command line - that's probably a better way to let people customize to their own boxes.
Noted in the TODO.
Btw, @miki - I hope you enjoy this one. :-)
March 17, 2014, 04:26:31 PM
[00:00:00] 2ch/s: 0.0000 3ch/s: 0.0000 4ch/s: 0.0000 Shares total: 0 / 0
Killed
Killed
Did it run out of memory?
March 17, 2014, 04:21:25 PM
To remove the 10% dev fee on b8 version just edit the binary using vi editor :
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
Are you sure this works? Ypool still reports a 10% fee for workers.
Yes, the fee goes to Your_Address...
Are you sure, because the address I used as a replacement wasn't showing up on ypool's dev fees page (the one that shows the balance of dev fee accounts)
March 17, 2014, 04:19:29 PM
where do I ddl the latest cpuminer version?
March 17, 2014, 04:15:52 PM
Quote
I tried on a couple other boxen and they do the same thing. I rolled this test machine back to b8.
...wait 1 minute. It´s working.
March 17, 2014, 04:10:21 PM
This forces things a little. I've released the mostly-full-speed version of mine as a binary only for now because of the pool fairness issue. I'll release source as soon as we get that worked out:
http://www.cs.cmu.edu/~dga/crypto/ric/
It's labeled b9. Windows coming tonight.
9% dev fee today. I'll cut it to 5% in two days and to 3% in four days.
Do you have a checksum for that build? I tried it and it crashes out after a couple rounds, noticed it's 1/3 the size of the old one as well...
I think I uploaded one that got corrupted the first time - I re-uploaded, try now.
a9e8c6df1aa3b27a60dbd8c5538fea79 xptminer-sse4-b9
Have to run - will check on this in an hour or so. But it seems to be happy. Or did you mean the windows exe? I've now re-uploaded that one too but can't test it:
d1b1ca3bb23d3f3dee8046daa3386afd xptminer-sse4-b9.exe
(I think my filesystem filled up while uploading)
Those checksums match what I have. The Windows version seems to be fine, but the linux one:
Code:
Launching miner...
Using 10 CPU threads
Using 10 threads
Fee Percentage: 10.00%. To set, use "-d" flag e.g. "-d 2.5" is 2.5% donation
Connected to server using x.pushthrough(xpt) protocol
xpt: Logged in with iocon.RCM2
New block data - height: 21388 tx count: 5
Generating table of small primes for Riecoin...
[00:00:00] Start mining
[00:00:00] 2ch/s: 0.0000 3ch/s: 0.0000 4ch/s: 0.0000 Shares total: 0 / 0
Killed
I tried on a couple other boxen and they do the same thing. I rolled this test machine back to b8.
March 17, 2014, 03:56:09 PM
I am a note at this mining, only been doing it since January.
I have no problem paying the 10% fee. From my point of view I was only getting 4 sometimes 6 a day depending on the pool clock. I have already received 12 today using dga's miner. Sure I could have had 13.2 but without his miner I could have had 4 or 6.
It's a win/win situation for me. I get about double the coins a day.
DGA and everyone else doing these miners I say "Thanks".
You should see the greif people are giving Christian about his cudaminer for heavy coin. It is ridiculous. These people could easily keep quite and mine away and leave it up to us to come up with our own software.
I am just saying "Don't bite the hand that feeds you."
Sorry for the rant.
To be fair, Christian set a dangerous precedent with Maxcoin. He kinda did it to himself. I have no problem paying the 10% fee. From my point of view I was only getting 4 sometimes 6 a day depending on the pool clock. I have already received 12 today using dga's miner. Sure I could have had 13.2 but without his miner I could have had 4 or 6.
It's a win/win situation for me. I get about double the coins a day.
DGA and everyone else doing these miners I say "Thanks".
You should see the greif people are giving Christian about his cudaminer for heavy coin. It is ridiculous. These people could easily keep quite and mine away and leave it up to us to come up with our own software.
I am just saying "Don't bite the hand that feeds you."
Sorry for the rant.
March 17, 2014, 03:53:45 PM
I am a note at this mining, only been doing it since January.
I have no problem paying the 10% fee. From my point of view I was only getting 4 sometimes 6 a day depending on the pool clock. I have already received 12 today using dga's miner. Sure I could have had 13.2 but without his miner I could have had 4 or 6.
It's a win/win situation for me. I get about double the coins a day.
DGA and everyone else doing these miners I say "Thanks".
You should see the greif people are giving Christian about his cudaminer for heavy coin. It is ridiculous. These people could easily keep quite and mine away and leave it up to us to come up with our own software.
I am just saying "Don't bite the hand that feeds you."
Sorry for the rant.
I have no problem paying the 10% fee. From my point of view I was only getting 4 sometimes 6 a day depending on the pool clock. I have already received 12 today using dga's miner. Sure I could have had 13.2 but without his miner I could have had 4 or 6.
It's a win/win situation for me. I get about double the coins a day.
DGA and everyone else doing these miners I say "Thanks".
You should see the greif people are giving Christian about his cudaminer for heavy coin. It is ridiculous. These people could easily keep quite and mine away and leave it up to us to come up with our own software.
I am just saying "Don't bite the hand that feeds you."
Sorry for the rant.
March 17, 2014, 03:51:45 PM
This forces things a little. I've released the mostly-full-speed version of mine as a binary only for now because of the pool fairness issue. I'll release source as soon as we get that worked out:
http://www.cs.cmu.edu/~dga/crypto/ric/
It's labeled b9. Windows coming tonight.
9% dev fee today. I'll cut it to 5% in two days and to 3% in four days.
Do you have a checksum for that build? I tried it and it crashes out after a couple rounds, noticed it's 1/3 the size of the old one as well...
I think I uploaded one that got corrupted the first time - I re-uploaded, try now.
a9e8c6df1aa3b27a60dbd8c5538fea79 xptminer-sse4-b9
Have to run - will check on this in an hour or so. But it seems to be happy. Or did you mean the windows exe? I've now re-uploaded that one too but can't test it:
d1b1ca3bb23d3f3dee8046daa3386afd xptminer-sse4-b9.exe
(I think my filesystem filled up while uploading)
March 17, 2014, 03:41:05 PM
This forces things a little. I've released the mostly-full-speed version of mine as a binary only for now because of the pool fairness issue. I'll release source as soon as we get that worked out:
http://www.cs.cmu.edu/~dga/crypto/ric/
It's labeled b9. Windows coming tonight.
9% dev fee today. I'll cut it to 5% in two days and to 3% in four days.
Do you have a checksum for that build? I tried it and it crashes out after a couple rounds, noticed it's 1/3 the size of the old one as well...
March 17, 2014, 03:25:42 PM
Quick update. Just notified the dev. on adding the Riecoin Foundation to the OP so people can see it better.
March 17, 2014, 03:16:12 PM
Hi, this is my first post here:)
I'd like to share my RIC solo-miner code, embedded in riecoind.
https://bitbucket.org/a00k/riecoin
Wow! Thanks! I'd like to share my RIC solo-miner code, embedded in riecoind.
https://bitbucket.org/a00k/riecoin
March 17, 2014, 03:13:38 PM
Hi, this is my first post here:)
I'd like to share my RIC solo-miner code, embedded in riecoind.
https://bitbucket.org/a00k/riecoin
I'd like to share my RIC solo-miner code, embedded in riecoind.
https://bitbucket.org/a00k/riecoin
Congrats on the release, a00k!
This forces things a little. I've released the mostly-full-speed version of mine as a binary only for now because of the pool fairness issue. I'll release source as soon as we get that worked out:
http://www.cs.cmu.edu/~dga/crypto/ric/
It's labeled b9. Windows coming tonight.
9% dev fee today. I'll cut it to 5% in two days and to 3% in four days.
Happy mining - now let's *really* find some primes.
("Mostly" full speed - I'm not crippling it deliberately, it's just not sieving up to 1b so that it will run on more machines. It's sieving up to 500m. I'll work on getting that parameter selectable from the command line soon.)
-Dave
March 17, 2014, 02:54:10 PM
To remove the 10% dev fee on b8 version just edit the binary using vi editor :
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
Are you sure this works? Ypool still reports a 10% fee for workers.
Yes, the fee goes to Your_Address...
March 17, 2014, 02:53:55 PM
To remove the 10% dev fee on b8 version just edit the binary using vi editor :
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
Are you sure this works? Ypool still reports a 10% fee for workers.
You still pay it to your own wallet
March 17, 2014, 02:47:39 PM
Hi, this is my first post here:)
I'd like to share my RIC solo-miner code, embedded in riecoind.
https://bitbucket.org/a00k/riecoin
I'd like to share my RIC solo-miner code, embedded in riecoind.
https://bitbucket.org/a00k/riecoin
Thanks for the contribution!
March 17, 2014, 02:45:55 PM
To remove the 10% dev fee on b8 version just edit the binary using vi editor :
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
vi xptminer-sse4-b8
:,$s/RUhMA8bvsr48aC3WVj3aGf5p1zytPSz59o/Your_Address/
(ENTER)
:wq
Are you sure this works? Ypool still reports a 10% fee for workers.
Jump to: