Topic: [ANN][ROI] ROI Coin | CPU Only Solo Mining Hybrid | 15% POS | 593% Term Deposit - page 46. (Read 107976 times)
February 24, 2018, 04:20:34 AM
Why did the devs not answer my question from post #2779? I think this is important to all users which are putting their coins in (long) term deposits.
February 23, 2018, 07:14:03 PM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
Is he using coin control and selecting a lot of inputs that puts him over the byte limit?
Even without coin control enabled, I seem to recall having the same issue with lots of small inputs from optiminer.pl being used in the transaction. Switched to suprnova to get larger deposits and that helps with this issue.
Perhaps try to send smaller amounts since you likely have many, many inputs to reach 2500 coins.
I wish I can attach picture but I can't do it yet as I'm not full member, yet.
It's very easy solution.
When you click on Deposit -> Inputs and you select coins, there will be number of bytes in RED (bytes) This number HAS to be less than 100000.
Didnt understand what are you talking about.
I assumed that you had coin control feature turned on. Sorry.
This is the right procedure:
Open wallet go to Settings -> Options -> Wallet -> Enable coin control features -> OK
Then, you click on Deposit -> Inputs and you select coins, there will be number of bytes in RED (bytes) This number HAS to be less than 100000.
February 23, 2018, 06:57:34 PM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
Is he using coin control and selecting a lot of inputs that puts him over the byte limit?
Sorry, but where/how to check it?
Open wallet go to settings -> options -> wallet -> enable coin control features (check it)
February 23, 2018, 02:06:22 PM
Important Update!
ROI coin will be hard forking at block 75,000.
You can find the new release here:
https://github.com/ROIcoin/ROIcoin/releases/tag/v1.1.4.000
You can find the new release here:
https://github.com/ROIcoin/ROIcoin/releases/tag/v1.1.4.000
ROIcoin Release Notes for v1.1.4.0
Important Notice:
We still see many users using old obsolete wallets, for this reason there will be a hard fork at block 75000.
IF you are on the wrong chain ( not the same height as the block explorer ) , you will need to re-sync, this will be faster with v1.1.4, thanks to the fix for issue #47
The biggest new feature is the faster block loading times. The first time you start the new wallet it will still take as long as before, because it is building up a new hash index database ( You will see a new sub folder called "cache" in the blocks folder ).
Warning: You must let the loading process complete. The second time you restart the new wallet you will see a significantly faster loading time. This new cache only requires about 30 Mb extra disk space.
Changes
- NEW - issue #15 a new flag -autoban (default is off) was introduced to automaticaly ban peers for 24hrs if they returned "Connection Refused" or "Host unreachable". This will reduce the cpu load when handling peers. ( recommended for 24/7 servers and VPS )
- NEW - issue #16 a new flag -banobsoleteversion (default is off) was introduced to automaticaly ban peers for 24hrs who have obsolete old wallet version ( < v1.1.4 )
- NEW - issue #40 matured coins will now show an alert bubble ( just like when you find a new block )
- FIX - issue #39 TheTDD has rebuild the term deposit table from scratch and fixed the sorting issues ( should also be faster to sort and update ).
- NEW - issue #47 TheTDD has implemented a deposit table delay mechanism to slow down UI updates during block sync at startup. Note: On Startup, it can take up to 5s before you see your term deposits, but it will speed up block syncing.
- BUG - issue #19 the wallet rpcport was wrongly configured and conflicted with the p2p port, this was the reason for the slow syncing and low peer counts issues in the past. The rpcport is now by default set to 3376
- NEW - issue #22 the sending addressbook will now contain the send and receive addresses combined , this will facilitate sending matured coins or combining inputs to yourself.
- FIX - rpc gettransaction call will now show credit value without interest ( requested by elbandi, to help pool operators )
- FIX - issue #42 estimated date is now based on 120s blocktime , this should provide a more accurate "Estimated Date" value.
- FIX - issue #44 setban rpc command can now accept a custom bantime ( larger than 24hrs )
Please report bugs using the issue tracker at github, we will not use bitcointalk forum for handling bug reports. https://github.com/ROIcoin/ROIcoin/issues
Upgrading and downgrading
How to Upgrade
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions).
Backup your wallet.dat file ( which you should always do regardless of an upgrade event ) then copy over ROIcoin-qt.exe (on Windows) or just copy over ROIcoin-qt (on Linux).
Credits:
TheTDD
Elbandi
ghobson2013
February 23, 2018, 02:01:40 PM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
Is he using coin control and selecting a lot of inputs that puts him over the byte limit?
Sorry, but where/how to check it?
February 23, 2018, 02:00:55 PM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
Is he using coin control and selecting a lot of inputs that puts him over the byte limit?
Even without coin control enabled, I seem to recall having the same issue with lots of small inputs from optiminer.pl being used in the transaction. Switched to suprnova to get larger deposits and that helps with this issue.
Perhaps try to send smaller amounts since you likely have many, many inputs to reach 2500 coins.
I wish I can attach picture but I can't do it yet as I'm not full member, yet.
It's very easy solution.
When you click on Deposit -> Inputs and you select coins, there will be number of bytes in RED (bytes) This number HAS to be less than 100000.
Didnt understand what are you talking about.
February 22, 2018, 06:08:34 PM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
Is he using coin control and selecting a lot of inputs that puts him over the byte limit?
Even without coin control enabled, I seem to recall having the same issue with lots of small inputs from optiminer.pl being used in the transaction. Switched to suprnova to get larger deposits and that helps with this issue.
Perhaps try to send smaller amounts since you likely have many, many inputs to reach 2500 coins.
I wish I can attach picture but I can't do it yet as I'm not full member, yet.
It's very easy solution.
When you click on Deposit -> Inputs and you select coins, there will be number of bytes in RED (bytes) This number HAS to be less than 100000.
February 22, 2018, 02:02:01 PM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
Is he using coin control and selecting a lot of inputs that puts him over the byte limit?
Even without coin control enabled, I seem to recall having the same issue with lots of small inputs from optiminer.pl being used in the transaction. Switched to suprnova to get larger deposits and that helps with this issue.
Perhaps try to send smaller amounts since you likely have many, many inputs to reach 2500 coins.
February 22, 2018, 12:07:44 PM
wallet upgraded, but mining unnormal, information:
[2018-02-22 08:15:27] thread 0: 254 hashes, 113.60 hash/s
[2018-02-22 08:15:27] thread 1: 243 hashes, 107.57 hash/s
[2018-02-22 08:15:27] thread 2: 259 hashes, 114.35 hash/s
[2018-02-22 08:15:28] thread 2: 121 hashes, 85.77 hash/s
[2018-02-22 08:15:28] accepted: 0/1 (0.00%), 415.16 hash/s (booooo)
[2018-02-22 08:15:29] thread 3: 252 hashes, 116.46 hash/s
[2018-02-22 08:15:29] thread 1: 275 hashes, 126.92 hash/s
[2018-02-22 08:15:29] thread 0: 270 hashes, 123.86 hash/s
[2018-02-22 08:15:31] thread 0: 260 hashes, 117.97 hash/s
[2018-02-22 08:15:31] thread 1: 230 hashes, 104.27 hash/s
[2018-02-22 08:15:31] thread 3: 266 hashes, 120.48 hash/s
pls help me determine what is going wrong. Thanks!
[2018-02-22 08:15:27] thread 0: 254 hashes, 113.60 hash/s
[2018-02-22 08:15:27] thread 1: 243 hashes, 107.57 hash/s
[2018-02-22 08:15:27] thread 2: 259 hashes, 114.35 hash/s
[2018-02-22 08:15:28] thread 2: 121 hashes, 85.77 hash/s
[2018-02-22 08:15:28] accepted: 0/1 (0.00%), 415.16 hash/s (booooo)
[2018-02-22 08:15:29] thread 3: 252 hashes, 116.46 hash/s
[2018-02-22 08:15:29] thread 1: 275 hashes, 126.92 hash/s
[2018-02-22 08:15:29] thread 0: 270 hashes, 123.86 hash/s
[2018-02-22 08:15:31] thread 0: 260 hashes, 117.97 hash/s
[2018-02-22 08:15:31] thread 1: 230 hashes, 104.27 hash/s
[2018-02-22 08:15:31] thread 3: 266 hashes, 120.48 hash/s
pls help me determine what is going wrong. Thanks!
February 22, 2018, 10:09:17 AM
It is easy to mine with CPU, block explorer and wallet works, transactions arrive in 20-30 seconds and confirmed in 1 minute. I think i continue to mine it.
easy? network hash is high for me ,i cannt mine one block in 24 hour
use hodlminer. With an i7 you get about 50roi per day
February 22, 2018, 09:39:53 AM
It is easy to mine with CPU, block explorer and wallet works, transactions arrive in 20-30 seconds and confirmed in 1 minute. I think i continue to mine it.
easy? network hash is high for me ,i cannt mine one block in 24 hour
February 22, 2018, 09:36:23 AM
It is easy to mine with CPU, block explorer and wallet works, transactions arrive in 20-30 seconds and confirmed in 1 minute. I think i continue to mine it.
February 22, 2018, 08:47:05 AM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
Is he using coin control and selecting a lot of inputs that puts him over the byte limit?
February 22, 2018, 08:35:07 AM
Need help for my friend.
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
When he is trying to deposit his coins he has an error: Transaction is too large. He's trying to deposit 2500 ROI for exmaple.
What can be the reason?
February 22, 2018, 05:02:17 AM
- FIX - issue #42 estimated date is now based on 120s blocktime , this should provide a more accurate "Estimated Date" value.
I have one question to this change. Do you habe also done some changes to speed up the blocktime? We never reached nearly 120 seconds since coin is started because of MIDAS. So when the estimate date is now bases on 120 seconds, the shown date will not be the real date when deposit ends. I think this is not very transparent for the users.
When we take a look an 2018:
- 01.01.2018 9:01 block 33000
- 22.02.2018 8:58 block 63134
So we have 30134 blocks in 52 days. The real blocktime is therefore 149 seconds. In my opinion the old value of 154 seconds for the calculated estimate date was honestly. The new value of 120 seconds suggests a date which will never be come true, if you did not any changes to sped up the blocktime.
February 22, 2018, 03:02:57 AM
Hello!
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
shutdown/close your Wallet.
Backup your files in AppData RoiCoin (wallet.dat, roicoin.conf if created), delete all files in RoiCoin folder but wallet.dat and roicoin.conf not.
Then start your wallet again and wait till it is resynced...
Thanks for clarification. I have only mined through putty with linux so I deleted all but wallet.dat from appdata and synced the QT-wallet. And now I am on the right blockchain.
These updates are bit confusing to newbies. My last question is it enough to backup your wallet.dat only once or do I have to do it in regular bases?
?I would do it frequently. This is because that backup copy is your only protection from losing all of your coins. Also make sure that backup is not only on the same PC as the wallet so put it on a usb stick or different pc or even cloud storage. Lastly, you should also encrypt - password protect your wallet also.
Yes I have that wallet.dat on USB stick. My only roi is on term deposit now but that password protection sounds reasonable. Thanks for the answers both of you.
My Blog post on wallet security
https://roi-coin.com/blogs/2
February 21, 2018, 05:49:39 PM
Hello!
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
shutdown/close your Wallet.
Backup your files in AppData RoiCoin (wallet.dat, roicoin.conf if created), delete all files in RoiCoin folder but wallet.dat and roicoin.conf not.
Then start your wallet again and wait till it is resynced...
Thanks for clarification. I have only mined through putty with linux so I deleted all but wallet.dat from appdata and synced the QT-wallet. And now I am on the right blockchain.
These updates are bit confusing to newbies. My last question is it enough to backup your wallet.dat only once or do I have to do it in regular bases?
?I would do it frequently. This is because that backup copy is your only protection from losing all of your coins. Also make sure that backup is not only on the same PC as the wallet so put it on a usb stick or different pc or even cloud storage. Lastly, you should also encrypt - password protect your wallet also.
Yes I have that wallet.dat on USB stick. My only roi is on term deposit now but that password protection sounds reasonable. Thanks for the answers both of you.
February 21, 2018, 05:36:35 PM
Hello!
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
shutdown/close your Wallet.
Backup your files in AppData RoiCoin (wallet.dat, roicoin.conf if created), delete all files in RoiCoin folder but wallet.dat and roicoin.conf not.
Then start your wallet again and wait till it is resynced...
Thanks for clarification. I have only mined through putty with linux so I deleted all but wallet.dat from appdata and synced the QT-wallet. And now I am on the right blockchain.
These updates are bit confusing to newbies. My last question is it enough to backup your wallet.dat only once or do I have to do it in regular bases?
?I would do it frequently. This is because that backup copy is your only protection from losing all of your coins. Also make sure that backup is not only on the same PC as the wallet so put it on a usb stick or different pc or even cloud storage. Lastly, you should also encrypt - password protect your wallet also.
February 21, 2018, 05:34:39 PM
Hello!
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
shutdown/close your Wallet.
Backup your files in AppData RoiCoin (wallet.dat, roicoin.conf if created), delete all files in RoiCoin folder but wallet.dat and roicoin.conf not.
Then start your wallet again and wait till it is resynced...
Thanks for clarification. I have only mined through putty with linux so I deleted all but wallet.dat from appdata and synced the QT-wallet. And now I am on the right blockchain.
These updates are bit confusing to newbies. My last question is it enough to backup your wallet.dat only once or do I have to do it in regular bases?
? February 21, 2018, 04:09:34 PM
Hello!
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
Dont know what I am doing wrong....I was running that old 1.1.2 with wrong blockhain so I took it away from my machine (not appdata). So I upgraded to this 1.1.4 but its
still showing wrong blochain. I have backed up my wallet.dat but I am real confused what to do next. I am not mining right now and the term deposits seems to be as usual...help would be nice.
shutdown/close your Wallet.
Backup your files in AppData RoiCoin (wallet.dat, roicoin.conf if created), delete all files in RoiCoin folder but wallet.dat and roicoin.conf not.
Then start your wallet again and wait till it is resynced...
Jump to: