Topic: ★[ANN][SUB1X| 🚀The Lowest Supply Masternode Coin🚀 | 500%+ APR | Zerocoin ★ - page 4. (Read 14232 times)
March 03, 2018, 01:58:32 PM
How long does it take to receive the new tokens? I have swapped my coins two weeks ago. Thanks for answer.
March 03, 2018, 12:47:01 PM
Who has the node now working, how many a day brings and how often? And then I decided to stay on the POS for the time being. Got with POS 9 times per day to 0.00998960.
March 03, 2018, 10:59:04 AM
The swap ends 23:00 GMT tomorrow. It's very important to swap before this time, otherwise your coins will become worthless.
For those who performed the swap, it's actually good to know that some extra scarcity might be created because some people miss the deadline. But from a fairness perspective, why should there be any deadline at all for people to swap their tokens? Couldn't that also be done via an airdrop in order to ensure that nobody is going to miss out for whatever reasons?
March 03, 2018, 02:22:21 AM
I have stopped the MN on Feb 2, as it was said the snapshot was made on the 26 Jan. Then rules where changed and people that kept the MN online got more stakes. This is unfair.
BTW I sent the coins to the swap, but did not receive the coins back. Sent to willdono the Hash and details but got no coins so far. Hope it's just a matter of time.
BTW I sent the coins to the swap, but did not receive the coins back. Sent to willdono the Hash and details but got no coins so far. Hope it's just a matter of time.
March 02, 2018, 01:44:41 PM
Dev,
Just need clarification. This is second swap and first swap was few months ago. I have swapped few months ago.
And this is second swap I have to swap again. My old wallet is SUB1X Core version v1.0.0.8-Release and I have installed new wallet zSub1x Core version v1.1.1.0-unk.
So I need to swap my SUB1X from (old wallet is SUB1X Core version v1.0.0.8-Release) to new wallet address (Sub1x Core version v1.1.1.0-unk).
Am I right ?
Just need clarification. This is second swap and first swap was few months ago. I have swapped few months ago.
And this is second swap I have to swap again. My old wallet is SUB1X Core version v1.0.0.8-Release and I have installed new wallet zSub1x Core version v1.1.1.0-unk.
So I need to swap my SUB1X from (old wallet is SUB1X Core version v1.0.0.8-Release) to new wallet address (Sub1x Core version v1.1.1.0-unk).
Am I right ?
I'm not a Dev but yes, that's right, we are moving to a new chain, you correctly described the instruction to the action. I hope that all difficulties have been overcome...
Thanks for reply, I have sent coins for swap.
Dev Please help,
I have not received coins after swap.
March 02, 2018, 08:43:38 AM
Just received my coins!
By the way, the developer himself wrote to me in a message in a telegram that sends coins. Nicely!
Thanks Willdono !!!
By the way, the developer himself wrote to me in a message in a telegram that sends coins. Nicely!
Thanks Willdono !!!
March 02, 2018, 07:59:54 AM
I received today my coins sent for swap. I hope that the swap will end and the marketing of the coin will begin. Coins are displayed in the line SUB1X, and in the string xSUB1X 0. So it should be? Tell me, does the stalking turn on at once?
Do you have stacking or is it necessary to convert the SUB1X to zSUB1CH, through the privacy tab?
The Sub1X swap is finished, and had to be done via a Swap Form.
zSub1x has MN's and Staking enabled.
That zSub1x section in the new wallet is a bit confusing - it is for private sending afaik, i.e. an additional feature. So, simply unlock your new wallet and staking will start for the new coins on the new chain - I assume you successfully swapped your old sub1x coins and have new ones in your new wallet.
Indeed, I swapped and all is well..
March 02, 2018, 07:37:39 AM
I received today my coins sent for swap. I hope that the swap will end and the marketing of the coin will begin. Coins are displayed in the line SUB1X, and in the string xSUB1X 0. So it should be? Tell me, does the stalking turn on at once?
Do you have stacking or is it necessary to convert the SUB1X to zSUB1CH, through the privacy tab?
The Sub1X swap is finished, and had to be done via a Swap Form.
zSub1x has MN's and Staking enabled.
So there is no way to swap my coins now? I don't know how I missed it.
One month is a little bit short period of time. I'm disappointed.
March 02, 2018, 07:17:38 AM
I received my coins, 1:1, and I've even staked twice by now. This project is tortuous, but things always work, that's great.
Yessss - got mine too - and yes, you are absolutely right :-)
March 02, 2018, 06:57:28 AM
I received my coins, 1:1, and I've even staked twice by now. This project is tortuous, but things always work, that's great.
yes ,i have received my coins too ,all function in wallet go well ,hope sub1x run well in future.i will give my personal support to hold them.
March 02, 2018, 06:54:26 AM
I received my coins, 1:1, and I've even staked twice by now. This project is tortuous, but things always work, that's great.
March 02, 2018, 06:28:48 AM
I received today my coins sent for swap. I hope that the swap will end and the marketing of the coin will begin. Coins are displayed in the line SUB1X, and in the string xSUB1X 0. So it should be? Tell me, does the stalking turn on at once?
Do you have stacking or is it necessary to convert the SUB1X to zSUB1CH, through the privacy tab?
The Sub1X swap is finished, and had to be done via a Swap Form.
zSub1x has MN's and Staking enabled.
That zSub1x section in the new wallet is a bit confusing - it is for private sending afaik, i.e. an additional feature. So, simply unlock your new wallet and staking will start for the new coins on the new chain - I assume you successfully swapped your old sub1x coins and have new ones in your new wallet.
March 02, 2018, 05:38:15 AM
I received today my coins sent for swap. I hope that the swap will end and the marketing of the coin will begin. Coins are displayed in the line SUB1X, and in the string xSUB1X 0. So it should be? Tell me, does the stalking turn on at once?
Do you have stacking or is it necessary to convert the SUB1X to zSUB1CH, through the privacy tab?
The Sub1X swap is finished, and had to be done via a Swap Form.
zSub1x has MN's and Staking enabled.
March 02, 2018, 05:36:41 AM
Also received all my coins in full and without issues, many thanks
Masternode works fine. For those struggling with setting up masternodes, it is better to start from scratch and you can use the old guide (https://sub1x.org/guide/LinuxSetupPdf) with changing here a few things:
1) replace everywhere sub1x with zsub1x, i.e. cloning a git repository in Linux would look like
sudo git clone https://github.com/SuB1X-Coin/zSuB1X (instead of sudo git clone https://github.com/SuB1X-Coin/SuB1X)
2) replace port 43172 with port 5721, e.g. in your masternode wallet config file you need to put masternodeaddr=:5721 (instead of masternodeaddr=:43172)
Masternode works fine. For those struggling with setting up masternodes, it is better to start from scratch and you can use the old guide (https://sub1x.org/guide/LinuxSetupPdf) with changing here a few things:
1) replace everywhere sub1x with zsub1x, i.e. cloning a git repository in Linux would look like
sudo git clone https://github.com/SuB1X-Coin/zSuB1X (instead of sudo git clone https://github.com/SuB1X-Coin/SuB1X)
2) replace port 43172 with port 5721, e.g. in your masternode wallet config file you need to put masternodeaddr=
Just to add to this.
If you are using your windows wallet to hold the coins and linux to host the masternode, and you get the Invalid IP Address error: Try and sttart it via the Debug window and not the Masternode buttons. That worked for me.
March 02, 2018, 05:34:14 AM
I received today my coins sent for swap. I hope that the swap will end and the marketing of the coin will begin. Coins are displayed in the line SUB1X, and in the string xSUB1X 0. So it should be? Tell me, does the stalking turn on at once?
Do you have stacking or is it necessary to convert the SUB1X to zSUB1CH, through the privacy tab?
March 02, 2018, 04:35:15 AM
Also received all my coins in full and without issues, many thanks
Masternode works fine. For those struggling with setting up masternodes, it is better to start from scratch and you can use the old guide (https://sub1x.org/guide/LinuxSetupPdf) with changing here a few things:
1) replace everywhere sub1x with zsub1x, i.e. cloning a git repository in Linux would look like
sudo git clone https://github.com/SuB1X-Coin/zSuB1X (instead of sudo git clone https://github.com/SuB1X-Coin/SuB1X)
2) replace port 43172 with port 5721, e.g. in your masternode wallet config file you need to put masternodeaddr=:5721 (instead of masternodeaddr=:43172)
Masternode works fine. For those struggling with setting up masternodes, it is better to start from scratch and you can use the old guide (https://sub1x.org/guide/LinuxSetupPdf) with changing here a few things:
1) replace everywhere sub1x with zsub1x, i.e. cloning a git repository in Linux would look like
sudo git clone https://github.com/SuB1X-Coin/zSuB1X (instead of sudo git clone https://github.com/SuB1X-Coin/SuB1X)
2) replace port 43172 with port 5721, e.g. in your masternode wallet config file you need to put masternodeaddr=
March 02, 2018, 02:52:45 AM
got my coins seamlessly , Thanks!
You are lucky! I'm happy for you! I unfortunately still wait for my coins, every 5 minutes I check my wallet. March 02, 2018, 12:14:11 AM
got my coins seamlessly , Thanks!
March 02, 2018, 12:06:36 AM
how much time will you need to distribute the coins? I did not get anything, when can I start worrying? I sent one of the first
I sent everything, I do not know what I did right. in any case, wait 48 hours. the old wallet did not delete, it's good that at different, you can simultaneously run 2 purses.
de0d31c1556fc2cc16ca3c3b888efa23764429feec91a43f62e35718e5f7a059 it's a transaction from an old wallet on 10/02/2018
ZXbXUEJPF5Y1nJ7swu2tF9JF8gUCRodYDH
ZUK6kR9DTduqBiz6tTGcCTw3bcWsizn4N9
ZM87nGeJQPEfdFtLXxMVmrJxGpW4WzHMLA
Now I do not remember, but I filled one of these addresses in the form, I'm worried, since I posted right at the beginning but still did not get anything.
March 01, 2018, 03:33:49 PM
Request to the developer to respond to my messages. I still have not received my coins and are very worried about this. I'm writing to e-mail, to Discord, to Telegram, where there is no answer ...
Jump to: