Topic: [ANN][TAC] TalkCoin - page 123. (Read 266731 times)
Why is this coin going down so much?
And I don't want to upset the other pools, just sharing my findings...
I've tried xHash, minep.it and SuprNova...
If you have a small farm it doesn't matter which pool you use, however if you have a medium to large sized farm SuprNova has the best infrastructure...
Pool efficiency sits closest to 100% after I join and hashrate is really stable. They are not charging fees at the moment however I'm donating to show my appreciation for good infrastructure...
I've tried xHash, minep.it and SuprNova...
If you have a small farm it doesn't matter which pool you use, however if you have a medium to large sized farm SuprNova has the best infrastructure...
Pool efficiency sits closest to 100% after I join and hashrate is really stable. They are not charging fees at the moment however I'm donating to show my appreciation for good infrastructure...
Hi!
I tried the new miner with updated drivers to 14.06.
When I boot without the sgminer conf, returns blue or black screen of death.
When I put 7970HD typical configuration, run normally sometimes says
"Gpu idle for best performance" and after a while the system freezes with blue screen again.
No increases hashrate .... What could it be?
When I start the first release calls "libcurl-4.DLL" he had never seen before including this library .... It may be that the problem?
Thanks in advance.
I tried the new miner with updated drivers to 14.06.
When I boot without the sgminer conf, returns blue or black screen of death.
When I put 7970HD typical configuration, run normally sometimes says
"Gpu idle for best performance" and after a while the system freezes with blue screen again.
No increases hashrate .... What could it be?
When I start the first release calls "libcurl-4.DLL" he had never seen before including this library .... It may be that the problem?
Thanks in advance.
Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.
Anyway as I uderstand I need 14.6 drivers for new miner.
djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.
sorry first time uploading something to github...
Also, thanks to the generous donator who send me 4000TAC
No need to sorry. You've done well. Ignition75 has donated I think. you justs double his hash for him. Quite a nice whale.
No it wasn't me, I'm planning on sending 1000 TAC to say thank you, my farm is now almost 1500 Mh/s thanks to this upgrade.
I've got a couple of rigs down at the moment, High Core Clock, Low Mem Clock and Intensity 21 was too much for this new mining software, just the 290 rigs are down, the 280 and 270s are fine... When I get to the warehouse tonight I'll send your reward to say thank you...
Outstanding work djm34...
Outstanding work. Lets get those buy order to the ground ! Only 2.2 BTC left. Maybe will take a day or two to finish it
Good work djm34
Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.
Anyway as I uderstand I need 14.6 drivers for new miner.
djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.
sorry first time uploading something to github...
Also, thanks to the generous donator who send me 4000TAC
No need to sorry. You've done well. Ignition75 has donated I think. you justs double his hash for him. Quite a nice whale.
No it wasn't me, I'm planning on sending 1000 TAC to say thank you, my farm is now almost 1500 Mh/s thanks to this upgrade.
I've got a couple of rigs down at the moment, High Core Clock, Low Mem Clock and Intensity 21 was too much for this new mining software, just the 290 rigs are down, the 280 and 270s are fine... When I get to the warehouse tonight I'll send your reward to say thank you...
Outstanding work djm34...
NIST5 (BLAKE - Grøstl - JH - Keccak - Skein) ,all of these 5 algos are included by X11 aglo ,so if X11 algo is cracked by FPGA ,then NIST5 must can be cracked by FPGA.dumping time is coming soon ,run ~~~
Come on, you could think of better FUD than that surely???
I'll assign you status of Baby Troll for now, if you think of something better I'll be happy to give you an upgrade...
NIST5 (BLAKE - Grøstl - JH - Keccak - Skein) ,all of these 5 algos are included by X11 aglo ,so if X11 algo is cracked by FPGA ,then NIST5 must can be cracked by FPGA.dumping time is coming soon ,run ~~~
no, it is that amd received a x2 boost with a new sgminer version, released recently
NIST5 (BLAKE - Grøstl - JH - Keccak - Skein) ,all of these 5 algos are included by X11 aglo ,so if X11 algo is cracked by FPGA ,then NIST5 must can be cracked by FPGA.dumping time is coming soon ,run ~~~
How many coin are currently in existing?
When is this coin going to Coinmarketcap?
Things are Looking great, keep up the good work!
When is this coin going to Coinmarketcap?
Things are Looking great, keep up the good work!
Can someone post a bin file for 290? And 5850...
With 14.6 I see no improvement at all :/, its even slower than def miner+13.12 0-o
Speed up is at place, 5850 went from 2800 to 5300...
PS:
A weird expirience.
If the miner is minimized, the speed goes down from 5300 to ~ 3200
The moment the windows is on top of desktop, speed goes up :S
I tried setting priority "above normal" - no luck :/
PPS:
Solved. I had a background cpu-miner set to kick in after 2min inactivity...
Speed up is at place, 5850 went from 2800 to 5300...
PS:
A weird expirience.
The moment the windows is on top of desktop, speed goes up :S
I tried setting priority "above normal" - no luck :/
PPS:
Solved. I had a background cpu-miner set to kick in after 2min inactivity...
a good idea
May-be try using autogen? (or autoconf and automake) ?
It works now :-) After copying files lib/m4/sph/compat/ccan and clean ./autogen. Got 50% speed increase on my rigs! Amazing!
can you share with us your sources, already fixed and ready for linux compilation?
Yes, will push it at git after work :-)
wow, djm, you are semi god 
now try to use the groestl trick (the one used in ccminer)
I will need to find "OpenCL for dummies" to do that now try to use the groestl trick (the one used in ccminer)
good luck doing the warp shuffle in OpenCL
May-be try using autogen? (or autoconf and automake) ?
It works now :-) After copying files lib/m4/sph/compat/ccan and clean ./autogen. Got 50% speed increase on my rigs! Amazing!
can you share with us your sources, already fixed and ready for linux compilation?
yea, would love to fire this thing up on linux..
but.. then again this only works on 14.6 correct?
the speed up works only on new 14.6 beta drivers who features some important new improvements from AMD
http://www.anandtech.com/show/8058/amd-catalyst-146-beta-drivers-now-available-adds-new-eyefinity-functionality-more
May-be try using autogen? (or autoconf and automake) ?
It works now :-) After copying files lib/m4/sph/compat/ccan and clean ./autogen. Got 50% speed increase on my rigs! Amazing!
can you share with us your sources, already fixed and ready for linux compilation?
yea, would love to fire this thing up on linux..
but.. then again this only works on 14.6 correct?
May-be try using autogen? (or autoconf and automake) ?
It works now :-) After copying files lib/m4/sph/compat/ccan and clean ./autogen. Got 50% speed increase on my rigs! Amazing!
can you share with us your sources, already fixed and ready for linux compilation?
these are my two R9-290 using sgminer with optimized nist5 by djm
wow, djm, you are semi god
now try to use the groestl trick (the one used in ccminer)
I will need to find "OpenCL for dummies" to do that now try to use the groestl trick (the one used in ccminer)
wow, djm, you are semi god
now try to use the groestl trick (the one used in ccminer)
now try to use the groestl trick (the one used in ccminer)
I am alone in my team (france)
invite your friends! that's just the point
Jump to: