Topic: [ANN][TAC] TalkCoin - page 124. (Read 266731 times)

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

when trying to compile on ubuntu, everything is fine until

git clone https://github.com/djm34/sgminer-nist5
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure

but when I press
make

I receive "No names found, cannot describe anything". Where are located these .deps file you wrote in your post?? I cannot find a .deps folder in sph-sgminer_x11mod

The .deps folders are in subfolder of the algo folder, pay attention to the path you should be able to find it.

thanks... I'll test this in the following days... I have to update drivers to 14.6... and I have no time now..

GodMonar

newbie

Activity: 44

Merit: 0

Quote from: amacar on June 15, 2014, 09:42:42 AM

Quote from: GodMonar on June 15, 2014, 09:39:37 AM

Quote from: amacar on June 15, 2014, 09:35:56 AM

Quote from: djm34 on June 15, 2014, 09:22:22 AM

Actually, this was released 1/2 half hours ago and I am pretty sure to be the only one using it right now Grin

(however Nvidia got their upgrade too)
As much as I'd like to own the hashrate, this won't happen with my only R9 290x. Grin

And for your info, the difficulty has been decreasing quite a lot since yesterday.

When I try to run, libcurl-4.dll is missing

next, libcrypto.dll is missing Undecided

Take libcurl-4.dll (http://www71.zippyshare.com/v/31328651/file.html) from old sgminer and working now.
R9 280x=12.67Mh/s
R9 270=7.941Mh/s

Thank you man!

Revolution..!!! Shocked

also HD5850(13.12driver) hashrate is doubled!!

Mandevil

full member

Activity: 324

Merit: 100

Rofl, nice Telemundo Logo , dont have an original one?

sunnyzhang

member

Activity: 98

Merit: 10

i have seen TAC in poloniex,seems like TAC have a great future,maybe i should buy some Tongue

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: corsaro on June 15, 2014, 10:48:46 AM

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

when trying to compile on ubuntu, everything is fine until

git clone https://github.com/djm34/sgminer-nist5
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure

but when I press
make

I receive "No names found, cannot describe anything". Where are located these .deps file you wrote in your post?? I cannot find a .deps folder in sph-sgminer_x11mod

The .deps folders are in subfolder of the algo folder, pay attention to the path you should be able to find it.

amacar

hero member

Activity: 546

Merit: 500

Quote from: djm34 on June 15, 2014, 10:42:23 AM

Quote from: amacar on June 15, 2014, 10:39:45 AM

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

Mine R9 280x = http://www42.zippyshare.com/v/29187000/file.html
R9 270 = http://www48.zippyshare.com/v/49613749/file.html

Wow thanks. It was fast. Could you share your config for 280x as well? thanks so much.

Mine config is simple:

Code:

color 0F
sgminer -k nist5 -d 0,1 -o stratum+tcp://pool1 -u user -p x --failover-only -o stratum+tcp://pool2 -u user -p [email protected] -I 22

280X=12.74 Mh/s
270=7.961 Mh/s
Gpu-engine for both (280x and 270) is set on 1150 with msi afterburner.

Don't forget to keep an eye on the temps. The temps are significantly higher.

Temps are quite ok, 61°C for 280X (outside of case) and 66°C for 270 (in computer case)

corsaro

legendary

Activity: 1400

Merit: 1000

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

when trying to compile on ubuntu, everything is fine until

git clone https://github.com/djm34/sgminer-nist5
cd sgminer-nist5
autoreconf -i
CFLAGS="-O2 -Wall -march=native" ./configure

but when I press
make

I receive "No names found, cannot describe anything". Where are located these .deps file you wrote in your post?? I cannot find a .deps folder in sph-sgminer_x11mod

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: amacar on June 15, 2014, 10:39:45 AM

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

Mine R9 280x = http://www42.zippyshare.com/v/29187000/file.html
R9 270 = http://www48.zippyshare.com/v/49613749/file.html

Wow thanks. It was fast. Could you share your config for 280x as well? thanks so much.

Mine config is simple:

Code:

color 0F
sgminer -k nist5 -d 0,1 -o stratum+tcp://pool1 -u user -p x --failover-only -o stratum+tcp://pool2 -u user -p [email protected] -I 22

280X=12.74 Mh/s
270=7.961 Mh/s
Gpu-engine for both (280x and 270) is set on 1150 with msi afterburner.

Don't forget to keep an eye on the temps. The temps are significantly higher.

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: amacar on June 15, 2014, 10:39:45 AM

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

Mine R9 280x = http://www42.zippyshare.com/v/29187000/file.html
R9 270 = http://www48.zippyshare.com/v/49613749/file.html

Wow thanks. It was fast. Could you share your config for 280x as well? thanks so much.

Mine config is simple:

Code:

color 0F
sgminer -k nist5 -d 0,1 -o stratum+tcp://pool1 -u user -p x --failover-only -o stratum+tcp://pool2 -u user -p [email protected] -I 22

280X=12.74 Mh/s
270=7.961 Mh/s
Gpu-engine for both (280x and 270) is set on 1150 with msi afterburner.

No thanks. My trick doesn't work. Copy bin file from windows to linux doing no good. I think I need to update the drivers. Thanks.

amacar

hero member

Activity: 546

Merit: 500

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

Mine R9 280x = http://www42.zippyshare.com/v/29187000/file.html
R9 270 = http://www48.zippyshare.com/v/49613749/file.html

Wow thanks. It was fast. Could you share your config for 280x as well? thanks so much.

Mine config is simple:

Code:

color 0F
sgminer -k nist5 -d 0,1 -o stratum+tcp://pool1 -u user -p x --failover-only -o stratum+tcp://pool2 -u user -p [email protected] -I 22

280X=12.74 Mh/s
270=7.961 Mh/s
Gpu-engine for both (280x and 270) is set on 1150 with msi afterburner.

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

Mine R9 280x = http://www42.zippyshare.com/v/29187000/file.html
R9 270 = http://www48.zippyshare.com/v/49613749/file.html

Wow thanks. It was fast. Could you share your config for 280x as well? thanks so much.

GGin

newbie

Activity: 40

Merit: 0

Quote from: AizenSou on June 15, 2014, 09:49:57 AM

Quote from: djm34 on June 15, 2014, 09:46:27 AM

It is clear that 14.6 is needed to get the speed increase on groestl.
But I see also some big difference between talkcoin where I was getting around 8.5MHash/s (both using 14.6)
to this one where I get 15.8MHash/s (I didn't try on the old one).

I have tested on 13.12 and 14.4 drivers. (all in Debian 7.5)
Performance on 13.12 is slightly worse (6.2Mhs -> 6.1Mhs)
on 14.4 (6.2Mhs -> 5.6Mhs).

It seems like your mod doesn't like old drivers.

Anyone experience the same thing?

I can report for performance decreasing too, about of ~3% :: R9 290, v14.4(windows), and increasing power (started use memory)

...will try the 14.6.

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: djm34 on June 15, 2014, 10:12:31 AM

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

sorry first time uploading something to github...

Also, thanks to the generous donator who send me 4000TAC

No need to sorry. You've done well. Ignition75 has donated I think. you justs double his hash for him. Quite a nice whale.

amacar

hero member

Activity: 546

Merit: 500

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

djm34 uses windows branch so if you clone from this repo you won't able to compile it under Linux. Copy all of files in subfolder .deps of all algo folders from sph-sgminer_x11mod to sgminer-nist5 you should be able to compile it. But it needs 14.6 drivers. Anyone could please share his 14.6 *.bin file for 280x, 290 ? thanks. Just upload all your *.bin files in sgminer-nist5 if you got boost from djm34's version.

Mine R9 280x = http://www42.zippyshare.com/v/29187000/file.html
R9 270 = http://www48.zippyshare.com/v/49613749/file.html

djm34

legendary

Activity: 1400

Merit: 1050