[ANN][TAC] TalkCoin - page 125. | Bitcointalksearch.org

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: MacHead2006 on June 15, 2014, 10:00:22 AM

Can`t compile in BATM.
Anyway as I uderstand I need 14.6 drivers for new miner.

I will have a look to the linux side (it was tested only on windows so far).
Yes the 14.6 drivers are required.

MacHead2006

member

Activity: 118

Merit: 10

Can`t compile in BAMТ.
Anyway as I uderstand I need 14.6 drivers for new miner.

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: djm34 on June 15, 2014, 09:46:27 AM

It is clear that 14.6 is needed to get the speed increase on groestl.
But I see also some big difference between talkcoin where I was getting around 8.5MHash/s (both using 14.6)
to this one where I get 15.8MHash/s (I didn't try on the old one).

I have tested on 13.12 and 14.4 drivers. (all in Debian 7.5)
Performance on 13.12 is slightly worse (6.2Mhs -> 6.1Mhs)
on 14.4 (6.2Mhs -> 5.6Mhs).

It seems like your mod doesn't like old drivers.

Anyone experience the same thing?

amacar

hero member

Activity: 546

Merit: 500

Quote from: djm34 on June 15, 2014, 09:46:27 AM

It is clear that 14.6 is needed to get the speed increase on groestl.
But I see also some big difference between talkcoin where I was getting around 8.5MHash/s (both using 14.6)
to this one where I get 15.8MHash/s (I didn't try on the old one).

Mine hash went from 11.43Mh/s to 20.54Mh/s with your compiled miner. Both tried on drivers 14.6

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: AizenSou on June 15, 2014, 09:41:05 AM

Quote from: djm34 on June 15, 2014, 08:27:53 AM

I have released an optimised version of nist5 for sgminer (and amd). It is based on x11mod from lasybear
It works best on 14.6 amd drivers.

It was tested so far on my R9-290x and allows to almost double the hashrate.
On the standard talkcoin kernel, I was getting around 8.5MHash/s (on 14.6 drivers)
With this kernel I get 15.8MHash/s (average) at 1050MHash/s

To use it: "--kernel nist5"

I highly recommend to keep an eye on the temperature as the card can run hot (80°C) and over/underclock according to your liking.

The source can be found at: https://github.com/djm34/sgminer-nist5
binaries with ADL (fan temp) support for windows: http://www35.zippyshare.com/v/84876787/file.html

I didn't try to compile on linux, however it should work (if not let me know)

Donations are welcomed (since I double your hashrate Grin

)
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p

Well I hope there is a bounty for that too Grin

Good job djm34, although it won't let me compile under linux and I manage somehow to compile this, but I didn't get any improvement at all. I think the improve performance lies on driver 14.6, which I currently dont have (still 13.12).

It is clear that 14.6 is needed to get the speed increase on groestl.
But I see also some big difference between talkcoin where I was getting around 8.5MHash/s (both using 14.6)
to this one where I get 15.8MHash/s (I didn't try on the old one).

Ignition75

sr. member

Activity: 462

Merit: 250

www.dashpay.io

Quote from: djm34 on June 15, 2014, 08:27:53 AM

I have released an optimised version of nist5 for sgminer (and amd). It is based on x11mod from lasybear
It works best on 14.6 amd drivers.

It was tested so far on my R9-290x and allows to almost double the hashrate.
On the standard talkcoin kernel, I was getting around 8.5MHash/s (on 14.6 drivers)
With this kernel I get 15.8MHash/s (average) at 1050MHash/s

To use it: "--kernel nist5"

I highly recommend to keep an eye on the temperature as the card can run hot (80°C) and over/underclock according to your liking.

The source can be found at: https://github.com/djm34/sgminer-nist5
binaries with ADL (fan temp) support for windows: http://www35.zippyshare.com/v/84876787/file.html

I didn't try to compile on linux, however it should work (if not let me know)

Donations are welcomed (since I double your hashrate Grin

)
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p

Well I hope there is a bounty for that too Grin

I just spent 2 days upgrading miner, drivers and OS updates on my farm and I see this now...

amacar

hero member

Activity: 546

Merit: 500

Quote from: GodMonar on June 15, 2014, 09:39:37 AM

Quote from: amacar on June 15, 2014, 09:35:56 AM

Quote from: djm34 on June 15, 2014, 09:22:22 AM

Actually, this was released 1/2 half hours ago and I am pretty sure to be the only one using it right now Grin

(however Nvidia got their upgrade too)
As much as I'd like to own the hashrate, this won't happen with my only R9 290x. Grin

And for your info, the difficulty has been decreasing quite a lot since yesterday.

When I try to run, libcurl-4.dll is missing

next, libcrypto.dll is missing Undecided

Take libcurl-4.dll (http://www71.zippyshare.com/v/31328651/file.html) from old sgminer and working now.
R9 280x=12.67Mh/s
R9 270=7.941Mh/s

Thank you man!

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: GodMonar on June 15, 2014, 09:39:37 AM

Quote from: amacar on June 15, 2014, 09:35:56 AM

Quote from: djm34 on June 15, 2014, 09:22:22 AM

Actually, this was released 1/2 half hours ago and I am pretty sure to be the only one using it right now Grin

(however Nvidia got their upgrade too)
As much as I'd like to own the hashrate, this won't happen with my only R9 290x. Grin

And for your info, the difficulty has been decreasing quite a lot since yesterday.

When I try to run, libcurl-4.dll is missing

next, libcrypto.dll is missing Undecided

that's strange, I run my version without these...

AizenSou

hero member

Activity: 938

Merit: 1000

Quote from: djm34 on June 15, 2014, 08:27:53 AM

I have released an optimised version of nist5 for sgminer (and amd). It is based on x11mod from lasybear
It works best on 14.6 amd drivers.

It was tested so far on my R9-290x and allows to almost double the hashrate.
On the standard talkcoin kernel, I was getting around 8.5MHash/s (on 14.6 drivers)
With this kernel I get 15.8MHash/s (average) at 1050MHash/s

To use it: "--kernel nist5"

I highly recommend to keep an eye on the temperature as the card can run hot (80°C) and over/underclock according to your liking.

The source can be found at: https://github.com/djm34/sgminer-nist5
binaries with ADL (fan temp) support for windows: http://www35.zippyshare.com/v/84876787/file.html

I didn't try to compile on linux, however it should work (if not let me know)

Donations are welcomed (since I double your hashrate Grin

)
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p

Well I hope there is a bounty for that too Grin

Good job djm34, although it won't let me compile under linux and I manage somehow to compile this, but I didn't get any improvement at all. I think the improve performance lies on driver 14.6, which I currently dont have (still 13.12).

GodMonar

newbie

Activity: 44

Merit: 0

Quote from: amacar on June 15, 2014, 09:35:56 AM

Quote from: djm34 on June 15, 2014, 09:22:22 AM

Actually, this was released 1/2 half hours ago and I am pretty sure to be the only one using it right now Grin

(however Nvidia got their upgrade too)
As much as I'd like to own the hashrate, this won't happen with my only R9 290x. Grin

And for your info, the difficulty has been decreasing quite a lot since yesterday.

When I try to run, libcurl-4.dll is missing

next, libcrypto.dll is missing Undecided

amacar

hero member

Activity: 546

Merit: 500

Quote from: djm34 on June 15, 2014, 09:22:22 AM

Actually, this was released 1/2 half hours ago and I am pretty sure to be the only one using it right now Grin

(however Nvidia got their upgrade too)
As much as I'd like to own the hashrate, this won't happen with my only R9 290x. Grin

And for your info, the difficulty has been decreasing quite a lot since yesterday.

When I try to run, libcurl-4.dll is missing

ocminer

legendary

Activity: 2688

Merit: 1240

https://tac.suprnova.cc

Running fine since day 1...

jump in an mine - we're at 0 % fee until today 0:00 CEST !

Amph

legendary

Activity: 3248

Merit: 1070

no matter which optimization amd will get, nvidia will always be ahead due to maxwell architecture, amd need the new pirate series(pirate islands) to match it

but i will try it on my 280x tnx Grin

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: yellowduck2 on June 15, 2014, 09:05:42 AM

Quote from: djm34 on June 15, 2014, 08:27:53 AM

I have released an optimised version of nist5 for sgminer (and amd). It is based on x11mod from lasybear
It works best on 14.6 amd drivers.

It was tested so far on my R9-290x and allows to almost double the hashrate.
On the standard talkcoin kernel, I was getting around 8.5MHash/s (on 14.6 drivers)
With this kernel I get 15.8MHash/s (average) at 1050MHash/s

To use it: "--kernel nist5"

I highly recommend to keep an eye on the temperature as the card can run hot (80Â°C) and over/underclock according to your liking.

The source can be found at: https://github.com/djm34/sgminer-nist5
binaries with ADL (fan temp) support for windows: http://www35.zippyshare.com/v/84876787/file.html

I didn't try to compile on linux, however it should work (if not let me know)

Donations are welcomed (since I double your hashrate Grin

)
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p

Well I hope there is a bounty for that too Grin

No wonder its not profitable to mine anymore. AMD holds majority of hash power. The upgrade actually cause mining to be unprofitable or below what miner previously get because of increase difficulties.

Actually, this was released 1/2 half hours ago and I am pretty sure to be the only one using it right now Grin

(however Nvidia got their upgrade too)
As much as I'd like to own the hashrate, this won't happen with my only R9 290x. Grin

And for your info, the difficulty has been decreasing quite a lot since yesterday.

yellowduck2

hero member

Activity: 868

Merit: 1000

Quote from: djm34 on June 15, 2014, 08:27:53 AM

I have released an optimised version of nist5 for sgminer (and amd). It is based on x11mod from lasybear
It works best on 14.6 amd drivers.

It was tested so far on my R9-290x and allows to almost double the hashrate.
On the standard talkcoin kernel, I was getting around 8.5MHash/s (on 14.6 drivers)
With this kernel I get 15.8MHash/s (average) at 1050MHash/s

To use it: "--kernel nist5"

I highly recommend to keep an eye on the temperature as the card can run hot (80Â°C) and over/underclock according to your liking.

The source can be found at: https://github.com/djm34/sgminer-nist5
binaries with ADL (fan temp) support for windows: http://www35.zippyshare.com/v/84876787/file.html

I didn't try to compile on linux, however it should work (if not let me know)

Donations are welcomed (since I double your hashrate Grin

)
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p

Well I hope there is a bounty for that too Grin

No wonder its not profitable to mine anymore. AMD holds majority of hash power. The upgrade actually cause mining to be unprofitable or below what miner previously get because of increase difficulties.

MaxOnBit

hero member

Activity: 490

Merit: 500

Quote from: GodMonar on June 15, 2014, 08:40:21 AM

Quote from: Ignition75 on June 14, 2014, 02:55:16 PM

Quote from: corsaro on June 14, 2014, 02:41:24 PM

I successfully compiled talkcoin-sgminer for windows, with adl_sdk, so you can monitor temperature and fan speed now.

https://dl.dropboxusercontent.com/u/80376827/talkcoin-sgminer-adl_sdk.zip

Legend!

Is this safe?

https://www.virustotal.com/ru/file/82fcb1790e1bb3321529f02ab5c02f2c194e5d8f00677ee90892f28ff59c8e76/analysis/1402840522/

GodMonar

newbie

Activity: 44

Merit: 0

Quote from: Ignition75 on June 14, 2014, 02:55:16 PM

Quote from: corsaro on June 14, 2014, 02:41:24 PM

I successfully compiled talkcoin-sgminer for windows, with adl_sdk, so you can monitor temperature and fan speed now.

https://dl.dropboxusercontent.com/u/80376827/talkcoin-sgminer-adl_sdk.zip

Legend!

Is this safe?

djm34

legendary

Activity: 1400

Merit: 1050

I have released an optimised version of nist5 for sgminer (and amd). It is based on x11mod from lasybear
It works best on 14.6 amd drivers.

It was tested so far on my R9-290x and allows to almost double the hashrate.
On the standard talkcoin kernel, I was getting around 8.5MHash/s (on 14.6 drivers)
With this kernel I get 15.8MHash/s (average) at 1050MHash/s

To use it:
"sgminer.exe --kernel nist5 --no-submit-stale -o stratum+tcp://erebor.dwarfpool.com:3350 -u Your_Tac_Address -p1 -I 19"

I highly recommend to keep an eye on the temperature as the card can run hot (80°C) and over/underclock according to your liking.

The source can be found at: https://github.com/djm34/sph-sgminer_x11mod
binaries with ADL (fan temp) support for windows: https://mega.co.nz/#!sQkQ0JaY!CBz8JkqO8c0IB5ibdUDyeMNrp4hF4MqoU5a6FdJccXw

Donations are welcomed (since I double your hashrate Grin

)
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
TAC: TuqNvPoQxghHfzwnPpAxSTiYoN6FM8LM5p

Well I hope there is a bounty for that too Grin

djm34

legendary

Activity: 1400

Merit: 1050

Quote from: Atrides on June 15, 2014, 05:54:29 AM

Quote from: minimila on June 14, 2014, 03:08:44 PM

Quote from: batty634 on June 14, 2014, 06:09:29 AM

Yeah, fantastic game with Robben and Van Persie playing great football, I've been impressed with all the games so far as teams are playing to win.

hey guys, let's play some dwarves football! Tongue

http://dwarfpool.com/tac

just shared miners on the region.

"World Talk Cup" start on 14.06, final on 26.06.

the team with the most "goals" wins 0% fee till the end of the real World Cup on 10.07

Have fun!

the team with the most "goals" wins 0% fee till the end of the real World Cup ~~on 10.07~~ on 13.07

I am alone in my team (france) Cry

bananahunter67

sr. member

Activity: 392

Merit: 265

Interesting idea!!

Topic: [ANN][TAC] TalkCoin - page 125. (Read 266731 times)