Quote
I think u compare your x11 hashrates and his x13 hashrate.
I have a 6970, with x11 ~2300kh/s, x13 ~1300kh/s
I have a 6970, with x11 ~2300kh/s, x13 ~1300kh/s
Yes , I missed the x13 part.
What setting you running on your 6970 to get 2300khs?
Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 24. (Read 351555 times)
June 08, 2014, 04:32:24 AM
Yes , I missed the x13 part.
What setting you running on your 6970 to get 2300khs?
June 08, 2014, 04:18:45 AM
Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
I have a 7 x 6950 (with unlocked shaders) rig and those run at 1.1-1.15v @ 900 -1375 giving 2000khs on pimp 1.5.4.
"intensity" : "16",
"worksize" : "128",
"thread-concurrency" : "8128",
"gpu-threads" : "2",
"gpu-engine" : "900",
"gpu-memclock" : "1375",
I also run a 7990 rig and I can tell you thatall those dual gpu cards run very hot .
I think u compare your x11 hashrates and his x13 hashrate.
I have a 6970, with x11 ~2300kh/s, x13 ~1300kh/s
June 08, 2014, 04:08:14 AM
After last update (03 jun) my hashes droped a bit
7970
x13mod
2.49 -> 2.45 Mh per card
Just noticed
7970
x13mod
2.49 -> 2.45 Mh per card
Just noticed
June 08, 2014, 04:03:39 AM
Quote
2000khs is x11 correct? Not x13 algo?
Yes thats right , I must have missed the fact that you were mining x13.
June 08, 2014, 04:00:53 AM
I see people getting 2.5-2.6Mhash with 7970 and i can only get 2.34 Mhash.
Is my bat correct? I am running 7970 @ 1040/700 core/mem with the below setting
sgminer -k x13mod -o stratum+tcp:// -u -p --gpu-reorder -d 0,1,2 -I 17 -g 4 -w 128
Is my bat correct? I am running 7970 @ 1040/700 core/mem with the below setting
sgminer -k x13mod -o stratum+tcp:// -u -p --gpu-reorder -d 0,1,2 -I 17 -g 4 -w 128
June 08, 2014, 03:22:35 AM
any chance that jackpot alg will be optiomized?
June 08, 2014, 02:06:32 AM
Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
I have a 7 x 6950 (with unlocked shaders) rig and those run at 1.1-1.15v @ 900 -1375 giving 2000khs on pimp 1.5.4.
"intensity" : "16",
"worksize" : "128",
"thread-concurrency" : "8128",
"gpu-threads" : "2",
"gpu-engine" : "900",
"gpu-memclock" : "1375",
I also run a 7990 rig and I can tell you thatall those dual gpu cards run very hot .
2000khs is x11 correct? Not x13 algo?
June 07, 2014, 06:57:55 PM
Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
I have a 7 x 6950 (with unlocked shaders) rig and those run at 1.1-1.15v @ 900 -1375 giving 2000khs on pimp 1.5.4.
"intensity" : "16",
"worksize" : "128",
"thread-concurrency" : "8128",
"gpu-threads" : "2",
"gpu-engine" : "900",
"gpu-memclock" : "1375",
I also run a 7990 rig and I can tell you thatall those dual gpu cards run very hot .
June 07, 2014, 06:16:25 PM
After some tweaking!
R7 260X I managed to get it to hash close to an R9 270.
Very good results from a card only costing $120
Threads=10
Engine=1250
Memory=1775
you should get 1.5Mhash/s
with scrypt it mined at only half the hash rate.
R7 260X I managed to get it to hash close to an R9 270.
Very good results from a card only costing $120
Threads=10
Engine=1250
Memory=1775
you should get 1.5Mhash/s
with scrypt it mined at only half the hash rate.
June 07, 2014, 05:18:44 PM
For R7 260X
after days and days of testing, the best settings are
W=128, Thread=2, Engine=1100, mem= 1625
Every other setting causes windows or linux to lock up and not very fast hashing speed.
Should be around 1.1Mhash/s with X13
after days and days of testing, the best settings are
W=128, Thread=2, Engine=1100, mem= 1625
Every other setting causes windows or linux to lock up and not very fast hashing speed.
Should be around 1.1Mhash/s with X13
June 07, 2014, 04:26:59 PM
Sapphire R9 280 dual x
cat 13
sph-sgminer_x11mod_b2_2min_SICK
~3,3 Mhs
~68.0C
~2800 RPM
stable
config
but i even got error message (always happen on gpu 1)
Please help me and what the function swith with S symbol on gpu R9 280, is should be on or off (i was turn it on), thanks for help
cat 13
sph-sgminer_x11mod_b2_2min_SICK
~3,3 Mhs
~68.0C
~2800 RPM
stable
config
Quote
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 21 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-60 --temp-cutoff 90 --temp-overheat 85
setx GPU_USE_SYNC_OBJECTS 1
sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 21 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-60 --temp-cutoff 90 --temp-overheat 85
but i even got error message (always happen on gpu 1)
Please help me and what the function swith with S symbol on gpu R9 280, is should be on or off (i was turn it on), thanks for help
You sure you have enough RAM?
June 07, 2014, 04:26:23 PM
Ok I got a better setting using worksize 64 and threads = 2 for a Radeon 6990
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
GPU 2: 88.0C 2360RPM | 1.226M/1.239Mh/s | A:4 R: 0.0% HW:0 WU:0.011/m I:18
GPU 3: 83.5C 30% | 1.223M/1.234Mh/s | A:5 R: 0.0% HW:0 WU:0.016/m I:18
Uses only about 200 Watts UNDERVOLTED TO 1.025V
I will slowly up the voltage until I can get it stable at 1.3-1.4
Using the default OC voltage of 1.175V it runs at 1.4Mh/s but uses about 400Watts and crazy loud. Fan needs to be 75% and still runs at 90C.
June 07, 2014, 04:09:59 PM
i have Asus R9 280X DirectCU II TOP 3GB GDDR5 384Bit AMD Radeon (R9280X-DC2T-3GD5 )
dont work x13mod. i was write -k x13mod but it say me: invalid parameter to set_kernel. ( x11mod is nice )
anyone using Asus r9 280x on x13mod pls write how
[snip image]
dont work x13mod. i was write -k x13mod but it say me: invalid parameter to set_kernel. ( x11mod is nice )
anyone using Asus r9 280x on x13mod pls write how
[snip image]
I have ten of the exact same card happily mining with x13mod; both -k x13mod and --kernel x13mod works.
Does the file x13mod.cl exist in your kernel subdirectory?
You're talking about this ? yes i have
June 07, 2014, 04:01:52 PM
i have Asus R9 280X DirectCU II TOP 3GB GDDR5 384Bit AMD Radeon (R9280X-DC2T-3GD5 )
dont work x13mod. i was write -k x13mod but it say me: invalid parameter to set_kernel. ( x11mod is nice )
anyone using Asus r9 280x on x13mod pls write how
[snip image]
dont work x13mod. i was write -k x13mod but it say me: invalid parameter to set_kernel. ( x11mod is nice )
anyone using Asus r9 280x on x13mod pls write how
[snip image]
I have ten of the exact same card happily mining with x13mod; both -k x13mod and --kernel x13mod works.
Does the file x13mod.cl exist in your kernel subdirectory?
June 07, 2014, 03:48:33 PM
i have Asus R9 280X DirectCU II TOP 3GB GDDR5 384Bit AMD Radeon (R9280X-DC2T-3GD5 )
dont work x13mod. i was write -k x13mod but it say me: invalid parameter to set_kernel. ( x11mod is nice )
anyone using Asus r9 280x on x13mod pls write how
dont work x13mod. i was write -k x13mod but it say me: invalid parameter to set_kernel. ( x11mod is nice )
anyone using Asus r9 280x on x13mod pls write how
June 07, 2014, 03:44:01 PM
Can anybody here with either an 6970 or 6990 post what voltage you are using?
I can't run my 6990 at stock voltages. The temp jumps to 105C. I had to undervolt to 1.025 and it mines as follows
Scrypt 344Khash/per gpu
X13 1050Khash/per gpu
X11 1250Khash/per gpu
I can't run my 6990 at stock voltages. The temp jumps to 105C. I had to undervolt to 1.025 and it mines as follows
Scrypt 344Khash/per gpu
X13 1050Khash/per gpu
X11 1250Khash/per gpu
June 07, 2014, 03:02:19 PM
you don't need at all that long command line
just -g 2 -I 18 will do the trick
just -g 2 -I 18 will do the trick
Thank's it's work
with this -I 21 -g 2 --worksize 128 i get ~3.3 Mhs
i will give a report if my gpu 1 getting sick again
June 07, 2014, 02:52:20 PM
Hi all
Just recently noticed this new sgminer . Iv been having a little difficulty trying to set up my 2 x gigabyte 7970 ghz edition cards with sgminer x11mod. Has any one had any success with these cards. If so which clock speeds and intensity are you useing .
Many thanks
Just recently noticed this new sgminer . Iv been having a little difficulty trying to set up my 2 x gigabyte 7970 ghz edition cards with sgminer x11mod. Has any one had any success with these cards. If so which clock speeds and intensity are you useing .
Many thanks
I get 3150 kh/s with this .conf and doing a small overclock to 1135mhz using cgwatcher.
Sorry for my English.
Code:
{
"pools" : [
{
"url" : "xxxxxx:xxxx",
"user" : "xxxx.xxxx",
"pass" : "x"
}
]
,
"intensity" : "16",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-threads" : "2",
"gpu-powertune" : "20",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}
June 07, 2014, 02:25:51 PM
you don't need at all that long command line
just -g 2 -I 18 will do the trick
just -g 2 -I 18 will do the trick
June 07, 2014, 01:58:47 PM
Sapphire R9 280 dual x
cat 13
sph-sgminer_x11mod_b2_2min_SICK
~3,3 Mhs
~68.0C
~2800 RPM
stable
config
but i even got error message (always happen on gpu 1)
Please help me and what the function swith with S symbol on gpu R9 280, is should be on or off (i was turn it on), thanks for help
cat 13
sph-sgminer_x11mod_b2_2min_SICK
~3,3 Mhs
~68.0C
~2800 RPM
stable
config
Quote
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 21 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-60 --temp-cutoff 90 --temp-overheat 85
setx GPU_USE_SYNC_OBJECTS 1
sgminer --kernel x11mod -o stratum+tcp://drkpool.com:3333 -u x -p x -I 21 --worksize 128 -g 2 --thread-concurrency 8190 --gpu-engine 1113 --gpu-memclock 1500 --gpu-powertune 20 --temp-target 68 --auto-fan --gpu-fan 40-60 --temp-cutoff 90 --temp-overheat 85
but i even got error message (always happen on gpu 1)
Please help me and what the function swith with S symbol on gpu R9 280, is should be on or off (i was turn it on), thanks for help
Jump to: