Topic: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer) - page 25. (Read 351555 times)
June 07, 2014, 01:11:31 PM
@charmees, what is your x13 config for those 6x r9 270 cards?
June 07, 2014, 10:49:30 AM
I have weird behaviour with x13, at first it starts to run around 10.2mh/s
within 4 hours it has linearly dropped to around 9.4mh/s.
today morning after waking up, after 8 hours, it had dropped to 8.7mh/s
and it seems to be linear drop, any suggestions?
gpu overheat?within 4 hours it has linearly dropped to around 9.4mh/s.
today morning after waking up, after 8 hours, it had dropped to 8.7mh/s
and it seems to be linear drop, any suggestions?
if you use 290/290x don`t set the -g parameter to 4
nope very stable around 50-60 degrees. using 6 x r9 270
June 07, 2014, 10:25:37 AM
Guys, a friend of mine just downloaded the miner. I advised him to mine in trademybit since I know it's a good multipool. The thing is, I have no idea how to help him configure his card since I have never mined since the release of dogecoin.
His GPU is the HD 7770. Any advice? Configuration command and such?
my configs hd 7770 at x11 and x13 https://www.dropbox.com/s/al929arxy4c3jk1/sph-sgminer_x11modx13modConf.zipHis GPU is the HD 7770. Any advice? Configuration command and such?
lasybear's miner 
June 07, 2014, 08:04:20 AM
Guys, a friend of mine just downloaded the miner. I advised him to mine in trademybit since I know it's a good multipool. The thing is, I have no idea how to help him configure his card since I have never mined since the release of dogecoin.
His GPU is the HD 7770. Any advice? Configuration command and such?
His GPU is the HD 7770. Any advice? Configuration command and such?
June 07, 2014, 06:31:08 AM
R290X owners on X11,
Please what's the best hash rate you achieved ? On my behalf it's 4.1 mH, I couldn't get more hashrate after lots of tweaking.. I can see some 290 none X owners achieved 4 mH.
Is it possible to break that record? Please share your config file settings maybe we can push those vgas..
Please what's the best hash rate you achieved ? On my behalf it's 4.1 mH, I couldn't get more hashrate after lots of tweaking.. I can see some 290 none X owners achieved 4 mH.
Is it possible to break that record? Please share your config file settings maybe we can push those vgas..
Yeah, same here. Never above 4.1
June 07, 2014, 05:03:07 AM
Hi all
Just recently noticed this new sgminer . Iv been having a little difficulty trying to set up my 2 x gigabyte 7970 ghz edition cards with sgminer x11mod. Has any one had any success with these cards. If so which clock speeds and intensity are you useing .
Many thanks
Just recently noticed this new sgminer . Iv been having a little difficulty trying to set up my 2 x gigabyte 7970 ghz edition cards with sgminer x11mod. Has any one had any success with these cards. If so which clock speeds and intensity are you useing .
Many thanks
June 07, 2014, 04:57:26 AM
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.binCatalyst 14.1
PS As for me you have the best *.bin-file for x11 algo - 3,5mhs 7970@1100/1250 it`s cool
by sasybear's x11-mod.please test x13 - 2.8 Mhs https://www.dropbox.com/s/x5tk4cip0lgb0lj/x13modTahitiglg2tc8192w128l4.bin
trying to get 2x 6990 to work with x13modold, in the same rig there are also 2 r9 280x, what -k setting should I use?
-k x13mod,x13mod,x13modold,x13modoldThanks much ! May be some optimization should be done for such hashrate, my original created bins give me 50-100 kh less hashrate from each card.
P.S. Win7 x64, amd 13.12 drivers.
June 07, 2014, 04:40:14 AM
R290X owners on X11,
Please what's the best hash rate you achieved ? On my behalf it's 4.1 mH, I couldn't get more hashrate after lots of tweaking.. I can see some 290 none X owners achieved 4 mH.
Is it possible to break that record? Please share your config file settings maybe we can push those vgas..
Please what's the best hash rate you achieved ? On my behalf it's 4.1 mH, I couldn't get more hashrate after lots of tweaking.. I can see some 290 none X owners achieved 4 mH.
Is it possible to break that record? Please share your config file settings maybe we can push those vgas..
June 07, 2014, 02:43:46 AM
I have weird behaviour with x13, at first it starts to run around 10.2mh/s
within 4 hours it has linearly dropped to around 9.4mh/s.
today morning after waking up, after 8 hours, it had dropped to 8.7mh/s
and it seems to be linear drop, any suggestions?
gpu overheat?within 4 hours it has linearly dropped to around 9.4mh/s.
today morning after waking up, after 8 hours, it had dropped to 8.7mh/s
and it seems to be linear drop, any suggestions?
if you use 290/290x don`t set the -g parameter to 4
June 07, 2014, 12:28:16 AM
I have weird behaviour with x13, at first it starts to run around 10.2mh/s
within 4 hours it has linearly dropped to around 9.4mh/s.
today morning after waking up, after 8 hours, it had dropped to 8.7mh/s
and it seems to be linear drop, any suggestions?
within 4 hours it has linearly dropped to around 9.4mh/s.
today morning after waking up, after 8 hours, it had dropped to 8.7mh/s
and it seems to be linear drop, any suggestions?
June 06, 2014, 09:21:14 PM
Having issues with sgminer and windows 7 crashing or freezing a few hours after running with intensity setting over 15 with 3x R9 270 (non x), no issues with cgminer previously, I could run it for weeks mining dogecoin. (windows 7, 13.12 catalyst)
sgminer will run fine at 14 intensity at basic settings like below but I only get about 1.2 to 1.3 MH per card
sgminer.exe -k x11mod -I 14 --gpu-engine 1050 --gpu-memclock 1250 -o stratum+tcp://drkpool.com:3333
sgminer will run fine at 14 intensity at basic settings like below but I only get about 1.2 to 1.3 MH per card
sgminer.exe -k x11mod -I 14 --gpu-engine 1050 --gpu-memclock 1250 -o stratum+tcp://drkpool.com:3333
I couple things you can try:
1. lower the --gpu-engine and see if that helps.
2. Use the "print" function on this thread and then ctrl+F and enter "270". See what other 270 users are using for settings
3. Be sure to disable and then enable the video cards after they crash. do that in device manager. Or you can do a full restart but sometime it's better to disable/enable
When I had your symptoms I got it working by changing memclock or adjusting Intensity.
Thanks! that print feature is handy, searched for r9 270 and found settings which has been stable now for 3 days
June 06, 2014, 09:01:15 PM
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.binCatalyst 14.1
PS As for me you have the best *.bin-file for x11 algo - 3,5mhs 7970@1100/1250 it`s cool
by sasybear's x11-mod.please test x13 - 2.8 Mhs https://www.dropbox.com/s/x5tk4cip0lgb0lj/x13modTahitiglg2tc8192w128l4.bin
trying to get 2x 6990 to work with x13modold, in the same rig there are also 2 r9 280x, what -k setting should I use?
-k x13mod,x13mod,x13modold,x13modold June 06, 2014, 06:22:21 PM
trying to get 2x 6990 to work with x13modold, in the same rig there are also 2 r9 280x, what -k setting should I use?
You will need to undervolt it to work properly.
I use
E - 827
M - 870
Everything else is default
Voltage 1.015
June 06, 2014, 06:19:29 PM
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.binCatalyst 14.1
PS As for me you have the best *.bin-file for x11 algo - 3,5mhs 7970@1100/1250 it`s cool
by sasybear's x11-mod.please test x13 - 2.8 Mhs https://www.dropbox.com/s/x5tk4cip0lgb0lj/x13modTahitiglg2tc8192w128l4.bin
https://bitcointalksearch.org/topic/m.7167105
June 06, 2014, 06:15:52 PM
please test x13 - 2.8 Mhs https://www.dropbox.com/s/x5tk4cip0lgb0lj/x13modTahitiglg2tc8192w128l4.bin
Nice one.Posted from Bitcointa.lk - #qSNCgdkAZirIiFxF
June 06, 2014, 04:59:16 PM
And do you guys get many rejects. I think my % rejects are too high.
June 06, 2014, 04:47:19 PM
Could someone post a working "x11modTahitiglg2tc8192w256l4.bin" file created with Catalyst 14.4? I'm using 14.6 because of Watch Dogs but the miner just keeps throwing HW errors.
https://www.dropbox.com/s/upxxgdttf8fzk8i/x11modTahitiglg2tc8192w256l4.binCatalyst 14.1
PS As for me you have the best *.bin-file for x11 algo - 3,5mhs 7970@1100/1250 it`s cool
by sasybear's x11-mod.please test x13 - 2.8 Mhs https://www.dropbox.com/s/x5tk4cip0lgb0lj/x13modTahitiglg2tc8192w128l4.bin
June 06, 2014, 04:27:36 PM
Ok, let me know if it is stable, I'll test it on my own cards.
Just in case, I test to run @1050Mhz but with intensity 17, I'm @1890kh/s per card ... let's see how many time it run
Just in case, I test to run @1050Mhz but with intensity 17, I'm @1890kh/s per card ... let's see how many time it run
After 14hours it's still stable...will test further and yours?
June 06, 2014, 04:20:01 PM
trying to get 2x 6990 to work with x13modold, in the same rig there are also 2 r9 280x, what -k setting should I use?
June 06, 2014, 03:12:29 PM
XFX R9 280x's x 4: gets 2.3 MH/s at engine 1000, memory 1500, undervolted to 1.117
Code:
,
"intensity" : "19,19,19,19",
"vector" : "1,1,1,1",
"worksize" : "128,128,128,128",
"kernel" : "x13mod,x13mod,x13mod,x13mod",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "8192,8192,8192,8192",
"failover-only" : true,
"gpu-engine" : "1000,1000,1000,1000",
"gpu-fan" : "0-85,0-85,0-85,0-85",
"gpu-memclock" : "1500,1500,1500,1500",
"gpu-memdiff" : "0,0,0,0",
"gpu-powertune" : "0,0,0,0",
"gpu-reorder" : true,
"temp-cutoff" : "90,90,90,90",
"temp-overheat" : "85,85,85,85",
"temp-target" : "75,75,75,75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : false,
"queue" : "0",
"scan-time" : "1",
"scrypt" : true,
"temp-hysteresis" : "3",
"tcp-keepalive" : "30",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
Jump to: