CAn you solomine this or do you need a pool now
You need a pool for sure.
Topic: [ANN][XCN] Cryptonite | 1st mini-blockchain coin | M7 PoW | No Premine - page 108. (Read 578501 times)
August 14, 2014, 05:59:21 PM
You need a pool for sure.
August 14, 2014, 05:45:43 PM
CAn you solomine this or do you need a pool now
August 14, 2014, 03:48:03 PM
The mini blockchain is a nifty idea. Probably one that future coins can pick up on. Altcoins tend to go through waves of evolution it seems. What you see are the dinosaurs dying out.
August 14, 2014, 02:33:19 PM
August 14, 2014, 02:16:44 PM
What exchanges can you trade this on?
August 14, 2014, 02:14:04 PM
The pond is drying up..all the fish looking for the water...all cryptos are dead...I dont see any light at the end of the tunnel...the amount of shitcoins killed the whole thing, nothing is profitable anymore
It's just the market cleaing out bad investments. Happens in all sectors where the market gets a say. It's a good thing.
August 14, 2014, 02:11:06 PM
The pond is drying up..all the fish looking for the water...all cryptos are dead...I dont see any light at the end of the tunnel...the amount of shitcoins killed the whole thing, nothing is profitable anymore
August 14, 2014, 11:43:06 AM
My payouts are steadily decreasing 
Onto the next coin.
Onto the next coin. August 14, 2014, 11:26:47 AM
Lots of new miners jumping on this coin today. Difficulty is shooting up. Even now, the party might be over. :p
At this exchange rate, many miners will lose money, except if they have free electricity and/or private mining software.
August 14, 2014, 11:00:57 AM
seem they dont have any such plan, including pools...
That's not entirely fair, as Bitfreak even setup a bounty thread. Not much going on there though, which again, looks like we need more promotion & wider adoption so that such things as bounties can move forward. Large stakeholders are kindly invited to add more substance to the bounties!
https://bitcointalksearch.org/topic/cryptonite-bounty-thread-ideas-and-donations-for-important-projects-735970
~ Myagui
August 14, 2014, 10:06:48 AM
Any promotion plans ? The most talking is miner, and miner, still miner.
I know that's very important, but we need to attract more investors too.
I know that's very important, but we need to attract more investors too.
+1
Though I would add that other than "miner, and miner, still miner", we also need more "pools, and pools, still pools"
As an investor, I would be concerned to see that all the nethash is concentrated on a single pool (1GH).
~ Myagui
seem they dont have any such plan, including pools...
August 14, 2014, 10:05:31 AM
hi,
i have installed SimplePool...
~/SimplePool$ python pool.py http://cryptoniterpc:[email protected]:8252 --sharelog share.log --force --lifetime 1
launch Ok NO ERROR but i read this message after login :
{"result":null,"error":{"code":-32700,"message":"Parse error"},"id":null}
please help me for the new pool
ps: share.log have zero errors
i have installed SimplePool...
~/SimplePool$ python pool.py http://cryptoniterpc:[email protected]:8252 --sharelog share.log --force --lifetime 1
launch Ok NO ERROR but i read this message after login :
{"result":null,"error":{"code":-32700,"message":"Parse error"},"id":null}
please help me for the new pool
ps: share.log have zero errors
August 14, 2014, 09:31:03 AM
Lots of new miners jumping on this coin today. Difficulty is shooting up. Even now, the party might be over. :p
August 14, 2014, 08:34:45 AM
Any promotion plans ? The most talking is miner, and miner, still miner.
I know that's very important, but we need to attract more investors too.
I know that's very important, but we need to attract more investors too.
+1
Though I would add that other than "miner, and miner, still miner", we also need more "pools, and pools, still pools"
As an investor, I would be concerned to see that all the nethash is concentrated on a single pool (1GH).
~ Myagui
August 14, 2014, 01:03:53 AM
My 6 x 750ti rig is itching to test that new ccminer of djm34. 
Give the poor rig some oil bud
"the poor rig" you say... nah, the rig is well oiled and ready to run a marathon.
Here you go:
2 x http://www.gigabyte.com/products/product-page.aspx?pid=4984#ov
4 x http://www.asus.com/Graphics_Cards/GTX750TIOC2GD5/
August 13, 2014, 10:32:17 PM
Any promotion plans ? The most talking is miner, and miner, still miner.
I know that's very important, but we need to attract more investors too.
I know that's very important, but we need to attract more investors too.
August 13, 2014, 09:59:51 PM
Here a first version of ccminer with cryptonite support (binaries windows).
ccminer -a m7
https://mega.co.nz/#!8c0RQRQI!7pux-uYYlgW2IYxaTbpERV-XTMkqUyYs6Nlt3AwCUpE
It should work, however there are still a few things to correct:
* relatively large amount compared to other algo of shares which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes.
The source will be uploaded a bit later as many things has been modified, I want to make sure the code doesn't break anything.
need cudart32_65.dllccminer -a m7
https://mega.co.nz/#!8c0RQRQI!7pux-uYYlgW2IYxaTbpERV-XTMkqUyYs6Nlt3AwCUpE
It should work, however there are still a few things to correct:
* relatively large amount compared to other algo of shares which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes.
The source will be uploaded a bit later as many things has been modified, I want to make sure the code doesn't break anything.
August 13, 2014, 09:59:07 PM
Here a first version of ccminer with cryptonite support (binaries windows).
ccminer -a m7
https://mega.co.nz/#!tM1HyTqL!jS9Ak6UK-AQkLC-850Fq4g382eYJySw7mCwSWCxfK-Q
It should work, however there are still a few things to correct:
* relatively large amount compared to other algo of shares which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes.
The source will be uploaded a bit later as many things has been modified, I want to make sure the code doesn't break anything.
need cudart32_65.dll ccminer -a m7
https://mega.co.nz/#!tM1HyTqL!jS9Ak6UK-AQkLC-850Fq4g382eYJySw7mCwSWCxfK-Q
It should work, however there are still a few things to correct:
* relatively large amount compared to other algo of shares which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes.
The source will be uploaded a bit later as many things has been modified, I want to make sure the code doesn't break anything.
August 13, 2014, 09:20:55 PM
Here a first version of ccminer with cryptonite support (binaries windows).
ccminer -a m7
https://mega.co.nz/#!8c0RQRQI!7pux-uYYlgW2IYxaTbpERV-XTMkqUyYs6Nlt3AwCUpE
It should work, however there are still a few things to correct:
* relatively large amount compared to other algo of shares which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes.
The source will be uploaded a bit later as many things has been modified, I want to make sure the code doesn't break anything.
ccminer -a m7
https://mega.co.nz/#!8c0RQRQI!7pux-uYYlgW2IYxaTbpERV-XTMkqUyYs6Nlt3AwCUpE
It should work, however there are still a few things to correct:
* relatively large amount compared to other algo of shares which doesn't validate on cpu (probably whirlpool)
* You might have while starting mining on 1gh a long chain of boo because of the low diff (like for HVC, If I remember well).
Just let the miner run, until it stabilizes.
The source will be uploaded a bit later as many things has been modified, I want to make sure the code doesn't break anything.
August 13, 2014, 09:11:34 PM
Jump to: