Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 52. (Read 125911 times)
These toasters will be a ferrari for a window of three months i think. When D3 roi out rage the script miners roi the x11 manufacturs will return to market. Before custumers have them running in the window of - higher roi then script / new sell manufactoring, delivery and operate (think 3 months window). But in that time offcourse no fiat loss but still btc gaining loss. Crazy crypto. Never keeps the same mind
I'm not sure if this has been discussed already on this long thread...
After setting the miner to 400MHz / 25% fan speed and selecting the blissz firmware in the System -> Upgrade -> Flash Firmware section, the screen keeps spinning in this screen, the miner reboots and nothing is changed.
The unit is hardware version 1.0.0.6 submodel 19.3 GH
The firmware keeps displaying the standard Bitmain firmware.
Am I missing something?
After setting the miner to 400MHz / 25% fan speed and selecting the blissz firmware in the System -> Upgrade -> Flash Firmware section, the screen keeps spinning in this screen, the miner reboots and nothing is changed.
The unit is hardware version 1.0.0.6 submodel 19.3 GH
The firmware keeps displaying the standard Bitmain firmware.
Am I missing something?
Try to download the file again and make sure not to unpack it, just download it and flash the downloaded file.
I'm not sure if this has been discussed already on this long thread...
After setting the miner to 400MHz / 25% fan speed and selecting the blissz firmware in the System -> Upgrade -> Flash Firmware section, the screen keeps spinning in this screen, the miner reboots and nothing is changed.
The unit is hardware version 1.0.0.6 submodel 19.3 GH
The firmware keeps displaying the standard Bitmain firmware.
Am I missing something?
After setting the miner to 400MHz / 25% fan speed and selecting the blissz firmware in the System -> Upgrade -> Flash Firmware section, the screen keeps spinning in this screen, the miner reboots and nothing is changed.
The unit is hardware version 1.0.0.6 submodel 19.3 GH
The firmware keeps displaying the standard Bitmain firmware.
Am I missing something?
Hi, blissz!
Thanks for your work!
I've got a problem on the v1.1 :: 02/12 version: always changing pool priority after dev mining.
A screen shows that middle pool from setting has a 0 priority.
Thanks for your work!
I've got a problem on the v1.1 :: 02/12 version: always changing pool priority after dev mining.
A screen shows that middle pool from setting has a 0 priority.
Mine got hung up after devmining while we were out shopping (it was about 6 hours- way out in the country and shop only twice a month so it is always a long trip) so I went back to stock til I figure out something to keep that from happening, personally I think the devmining thing is a great way to get paid for work, the more people who find it useful the more you make. There are just a few irritants in the way that it ends up functioning, might have been more of a glitch having to do with pool order so I'll check that out when I have time to watch it the whole time.
Thanks for the inof: the priority change I will look into. It can't hang on a dev mining pool actually except if all your own pools are down
Hi, blissz!
Thanks for your work!
I've got a problem on the v1.1 :: 02/12 version: always changing pool priority after dev mining.
A screen shows that middle pool from setting has a 0 priority.
Thanks for your work!
I've got a problem on the v1.1 :: 02/12 version: always changing pool priority after dev mining.
A screen shows that middle pool from setting has a 0 priority.
Mine got hung up after devmining while we were out shopping (it was about 6 hours- way out in the country and shop only twice a month so it is always a long trip) so I went back to stock til I figure out something to keep that from happening, personally I think the devmining thing is a great way to get paid for work, the more people who find it useful the more you make. There are just a few irritants in the way that it ends up functioning, might have been more of a glitch having to do with pool order so I'll check that out when I have time to watch it the whole time.
it must be hard to perform autotune, especially with completly random error.
I agree, I hope Blissz doesn't fall into a rabbit hole with this. Boards sometimes throw tons of errors, sometimes work fine. I have one board that doesn't throw much errors but craps out after a few hours if I push it too far. Also the fact that changing settings in one board (for some mysterious reason) affects the other boards. It took me days to understand and tune this thing, I definitely wouldn't try to automate it 
Disclaimer: This is a guess based on earlier bitmain products - electrical distribution. Most manf. seem to be focused on maxing out the chips capabilities so they run everything parallel Bitmain (used to anyway) tend to run serial, Not sure of the specifics of exactly what goes on since you can only get the earliest schematics and I'm mining so I'm not about to take one apart. (yet anyway) Where was I? sorry not enough coffee in me yet. Anyway something about the voltage regulators jiggles things every time you change a setting the board "thinks" they are all supposed to be getting the same juice, so change voltage on one and it jiggles amps which ends up causing the other boards to react. I might be able to put this more clearly after I wake up completely, but by then I will probably forget what I was talking about. Had myself a rough couple of days, and perhaps a smidgen too much scotch. - like I'm aware since you have juice running to each board independently (like you can have separate psu's for each board) then there should be no reason adjusting the volts on one would affect another, but I know that it does, and once upon a time when sleep was in my life I probably remembered why.
Hi, blissz!
Thanks for your work!
I've got a problem on the v1.1 :: 02/12 version: always changing pool priority after dev mining.
A screen shows that middle pool from setting has a 0 priority.
https://i.imgur.com/pCBkr5j.gif
Thanks for your work!
I've got a problem on the v1.1 :: 02/12 version: always changing pool priority after dev mining.
A screen shows that middle pool from setting has a 0 priority.
https://i.imgur.com/pCBkr5j.gif
Anyone knows spesc from D3 fan? m3/ preasure and rpm? db from fan are so high
it must be hard to perform autotune, especially with completly random error.
I agree, I hope Blissz doesn't fall into a rabbit hole with this. Boards sometimes throw tons of errors, sometimes work fine. I have one board that doesn't throw much errors but craps out after a few hours if I push it too far. Also the fact that changing settings in one board (for some mysterious reason) affects the other boards. It took me days to understand and tune this thing, I definitely wouldn't try to automate it My elec is fairly expensive ($0.2/kwh), but I've managed to get approx 126% ratio (MH/S RT) through cryptocompare. Here are the settings if anyone is interested.
The power usage is 812W.
My D3 sounded like a rocket ship at first, but it's incomparably better with this mod. Thanks!
The power usage is 812W.
My D3 sounded like a rocket ship at first, but it's incomparably better with this mod. Thanks!
These settings work a little differently for me:
16,539.8 MH/S(RT)
HW 56 (first 30 min - Chain1 20 HW - Chain2 36 HW - Chain3 0 HW)
843 WATT
Ive never seen 444 freqency above 6k on any of my 4 D3 chains , silicon lottery
My elec is fairly expensive ($0.2/kwh), but I've managed to get approx 126% ratio (MH/S RT) through cryptocompare. Here are the settings if anyone is interested.
The power usage is 812W.
https://i.imgur.com/alTdRhv.png
https://i.imgur.com/9JZzK8X.png
https://i.imgur.com/7N41pIR.png
My D3 sounded like a rocket ship at first, but it's incomparably better with this mod. Thanks!
The power usage is 812W.
https://i.imgur.com/alTdRhv.png
https://i.imgur.com/9JZzK8X.png
https://i.imgur.com/7N41pIR.png
My D3 sounded like a rocket ship at first, but it's incomparably better with this mod. Thanks!
These settings work a little differently for me:
16,539.8 MH/S(RT)
HW 56 (first 30 min - Chain1 20 HW - Chain2 36 HW - Chain3 0 HW)
843 WATT
Can we start a pool to get Blissz an L3+ and a D3 so he can rewrite the OS'? The FIRMWARE from BITMAIN is trash IMO
GenTarkin (hi, if you are reading this) told me in a PM, there was not a lot he could do...closed source and all, if I remember right
any gains would be in the cgminer software area...this was for the L3+, he was looking at for a buddy. As to the D3, well that would
be a toaster by the first of the year or maybe Feb 2018....ie doorstop....(at least at my 12c kWh electric)...So why bother.
Anyway, he probably lurks in this thread and can provide more detail, it is not like I'm talking out of school on this if there was
a way to tweak Bitmain products..I'm sure he or someone, would have done so by now. It is just not easy, from what I gather.
Ah, I see, so this is what bitmain posts, BEFORE, they put an firmware update for the Bitmain D3 on their site? ie a clue?
Did U know, three days ago bitmaintech update github with DASH branch (to actual 1.0.0.9).
Not precisely sure what you mean, but nothing has changed from the Bitmain Firmware Page, up to this point. (time/date/etc)
https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E
Likely, IMHO, Bitmain will soon stop making firmware upgrades for this. In my case at 12c kwh, I can't see me running these
miners on Jan 1st, 2018!
(live and learn I guess)
This a weird world, where my original KNC Titan from Nov 6th, 2014 is still running and made today does $7.54 USD on 12c kwh at
1250 watts and 300mh.
Sheesh. 3 years and 1 month.
Yet this D3 is toaster city within 3-5 months at best.
Does not bode well, for my toaster purchases, from any ASIC manufacture in 2018!
oh well, I can't always pick winners
(on the other hand, the 2 D3's I have will make sturdy bookcase ends/doorstops/boat anchors/space heaters/shooting range targets/hamster hovels/etc)
I think this is what he is referring too - https://github.com/bitmaintech/cgminer-dash
I am not sure if everyone is going to cheap in but its a good idea.I am all for it although I do not have any L3+.
it must be hard to perform autotune, especially with completly random error.
I agree, I hope Blissz doesn't fall into a rabbit hole with this. Boards sometimes throw tons of errors, sometimes work fine. I have one board that doesn't throw much errors but craps out after a few hours if I push it too far. Also the fact that changing settings in one board (for some mysterious reason) affects the other boards. It took me days to understand and tune this thing, I definitely wouldn't try to automate it Did U know, three days ago bitmaintech update github with DASH branch (to actual 1.0.0.9).
Not precisely sure what you mean, but nothing has changed from the Bitmain Firmware Page, up to this point. (time/date/etc)
https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E
Likely, IMHO, Bitmain will soon stop making firmware upgrades for this. In my case at 12c kwh, I can't see me running these
miners on Jan 1st, 2018!
(live and learn I guess)
This a weird world, where my original KNC Titan from Nov 6th, 2014 is still running and made today does $7.54 USD on 12c kwh at
1250 watts and 300mh.
Sheesh. 3 years and 1 month.
Yet this D3 is toaster city within 3-5 months at best.
Does not bode well, for my toaster purchases, from any ASIC manufacture in 2018!
oh well, I can't always pick winners
(on the other hand, the 2 D3's I have will make sturdy bookcase ends/doorstops/boat anchors/space heaters/shooting range targets/hamster hovels/etc)
Did U know, three days ago bitmaintech update github with DASH branch (to actual 1.0.0.9).
Hello upgraded to new version and i get + 3 temp more on all boards with same setting as before is this normal ? IM using OC 22gh
Yes, I also got extra temperature with the new firmware.
3 degrees is not so much, don't worry.
It seems that the new firmware raises the temperature due to the fact that a new version of cgminer is used.
The main thing is that the temperature on the boards does not exceed 80 degrees - otherwise the device will stop mining.
Hello upgraded to new version and i get + 3 temp more on all boards with same setting as before is this normal ? IM using OC 22gh
this is not a mining software itself, only a firmware mod ,
it does not deserve the developer's fee, and this is also a hidden charge, no one can be sure from it.
also the development process is still ongoing and it does not provide additional revenue.
If the algorithm was added, the developer fee was completely worth it.
seems as , it uses the units for experimantal and take share from the profit from them hiddenly
the common thing , mining software takes shares the profit. No one give lifetime profit share to modding.
do not confuse the minds please.
it does not deserve the developer's fee, and this is also a hidden charge, no one can be sure from it.
also the development process is still ongoing and it does not provide additional revenue.
If the algorithm was added, the developer fee was completely worth it.
seems as , it uses the units for experimantal and take share from the profit from them hiddenly
the common thing , mining software takes shares the profit. No one give lifetime profit share to modding.
do not confuse the minds please.
Are you russian?
In the Russian forum has a tutorial on how to go around without DEV FEE.
How was the dev fee hidden? I spotted it immediately. Dev fees are why people put their time into building new tools that we can benefit from. No dev fee = no new miners or FW, and we're stuck with whatever Bitmain gives us. (Not much!)
In the first ten(?) versions of the software, he was on the front page.
my intention is never to disrespect the developer's rights.
he certainly deserves a fee(one time payment , not a lifetime share) . I do not want to be misunderstood in this matter.
Jump to: