Topic: Antminer D3 Blissz firmware (10/12 v1.12 update) - page 55. (Read 125926 times)

Hi guys,

This is excellent. Thanks for the hard work on this.

Just an advice, I can see 5 pools and not 3 when I am going to pool in ssh. The 3 pools links are ok, but the other 2 are completely out, so therefore the probability of mining not for your pool and worker.

If you can fix it will be great, if not you need to go to ssh and change it.

Thanks

Baikal mostly used fpga's (not sure on the newer ones like the giant - but probably fpga's still if they say you can add an algo later) There are a couple other companies out there that use fpga's instead of asics and the public is just used to generically calling any miner with more oomph than a video card an "Asic" now fpga's on the other hand.....

Thanks a lot to blissz for his great work. Finally I managed to find stability for my two D3. I want to post my configuration in order to help those who have not yet succeeded.

D3-1



FAN MODE=AUTO PERFOMANCE

50%


D3-2



FAN MODE=AUTO PERFOMANCE

50%

Baikal Miners comes to mind. when you understand X11 includes 11 algo then its not too far fetched to imagine if they can be merged  then they can be unchained or isolated.

You don't have to search for anything, read the first post in the thread with all the details of the firmware before using it, in particular:


Hey thats a chat between two people, Not all the people who downloaded the software, just THOSE two people.

I did not agree to anything, even though I do.

again, sorry for bringing it up, But two sentences in 73 pages was the two I missed in the bottom third of a discussion on how to stop fan noise.....

And What mining fee? Are you saying it is CLEAR what is going on here?

For all we know the d3 is mining 5% for him, how do we know?



Maybe it will delete all our wallets, and hack our house lighting?

I do not know. nor do you! But thus far I trust anyone more than Bitmain.


So you are right, I should of read "everything" before I tried this,

But I am glad I did Not at this point. I would not of enjoyed this awesome learning experience.

Thanks for pointing out the two sentences that clearly state that the Development fee is 1.5% of all my future mining with this machine on this software, that was never clear to me.

Nor was it stated anywhere during the flash process, nor was it written anywhere near the download link...

Now it is, I will relocate them and re-boot original FW after my additional solar panels come.

Still not pissed I did this, unless I cannot get back to "no fee" mining when Bitmain does essentially the same as Blissz (in like two years probably).

Thanks again, Blissz, owe you three Beers!


WOW!

23 Blocks found on stratum+tcp://italyiimp.com:3533 many Happy coins! ohh 2 bucks...

Bought some 1000 Hemp yesterday, glad I did. Go "THCCOIN"!!!

Getting some MUE toooooo!! Mooooooooooo

M

I think it depends on your electricity cost. You could also sell it on ebay, they are around $700.

Autotune boards will be awsome. I hope wee see that next time

Yes,

I never mined before two weeks ago, andthis software IS as PLUG and PLAY as it gets.

Thanks again Blissz

M

new firmware same issue with that one chain 1

1
60
300
0.00000
0
27
25
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
2
60
487
6051.01
0
52
73
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3
60
512
6354.25
0
57
79
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo


all asics are detected but no hash

asic status for that chain is
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxx

I don't expect making so big business with this D3.... but just looking the best option for getting  profit... atm  11 ONX per day... around 330 ONX per month  at 0,50 $ per ONX  its 165$,  that cover  electricty cost  (0,14 cents per kW/h)  and give a little profit !

P.D If ONX will goes up to 1$ per coin, profit will be higher

we should really start an independant thread about mining other algo's has nothing to do with this thread about a very specific topic of D3 firmware enhancements.

Entirely possible, like lets say you design the chip with x15 kill the x13 and x15 possibilities and YOU don't have to change a thing but taking out that one little thing that kills it and voila x13, now you roll out a new pile of miners, but production costs are down no refitting machines to crank out the new chip... 'course it still could be a "hey someone is doing x11 crank em out while we can make a little $$$ out of it.. go go go!" and they never went the route of x15 and downgrading.

To OP. Thank you. Great stuff.

Good stuff, thanks for sharing. I also thought that maybe bitmain was smart enough to make the chip a little more generic to hopefully reuse the design, mask, manufactured chips (although with the numbers they move a few million bucks may be pocket change). BUT, of course if they are smart they also put some eFuses there and the ones we have are burnt to be X11 forever 

I have to interject, that the specific "thing" this asic is supposed to do is 11 different algos, and yeah you aren't going to be able to add scrypt, but *IF* bitmain had a little forethought when they did the chip (which is possible since we will never see any real specs on it) they may have already done up to x15 and it just never sends the signal to use the other algos. (It is just as likely though that x11 is all it can do, but the possibility MAY be there for x13 and/or x15 ) Now because it can do all of the x11 algos .. again with the MAY it MAY be possible to trick it on the software end to mine a single algo of the 11. - Though you are 100% right about if the hardware "ain't already down with it" you ain't doin' it. So odds of adding an algo? very very small and only exist at all if the chips were already built to do other algos and the function just wasn't acessed. Odds of being able to separate out a single on of the 11 we already know are there? much greater, but again depends on alot of little factors that most of us will never know. Might be that jigging cgminer might be enough, might not be possible at all. I don't know enough about how x11 signals to change algos to the next one in the list.
So possible? maybe, but worth the effort that it would need? dunno.

So is this really worth it? I've kept mine off for so long due to low profit and so much noise. Do you just DL and flash like the stock firmware?

As far as I know, no - you won't be able to see that. You could at any point flash the Bitmain FW onto the controller again.
But I'm not 100% sure about settings. So in this case I'd recommend to wipe all settings and flash back original FW; then there should be no easy way to see that you used a different firmware before.

no one is making you use it.

Go do it yourself  and then give your time and expertise away for free to the community. I support you in this.

How hard is it to understand that ASICs do one and one thing only. https://en.wikipedia.org/wiki/Application-specific_integrated_circuit

lol who is this russian you speak of