Antminer L3 - 250mh - 400watt Scrypt miner coming soon - page 59.

Longsnowsm

hero member

Activity: 868

Merit: 517

Quote from: vinylwasp on December 30, 2016, 09:49:55 PM

Quote from: Longsnowsm on December 30, 2016, 09:04:51 PM

Quote from: vinylwasp on December 30, 2016, 08:23:26 PM

Quote from: Longsnowsm on December 30, 2016, 05:44:10 PM

Well it looks like we have leaked photos and prices on the internet for the next miner to be released by Bitmain. The Antminer L3, 250mhs scrypt miner, 400watts at the wall.

If you can read Chinese you can buy one today from Bitmain's website for 11000 CNY or 1.656 BTC. ($1600 USD)

https://shop.bitmain.com/productDetail.htm?pid=00020161229040715306ygMSJQLh06C0

And the specs do look like they pull only 400w from the APW3-1600.

Given they've just about finished building this new DC https://blog.bitmain.com/en/bitmain-to-set-high-standards-with-state-of-the-art-xinjiang-data-center/, there goes the BTC/MHs rate again Cry

So Bitmain is telling customers inside China they are shipping January 5th. I wonder how long before we will get a chance to buy these... Huh

Would you like to hire an interpreter and drive another group-buy Longsnowsm?
.
.
.
.
.
.
.
.
Just kidding! Roll Eyes

LOL, With Bitmain we won't have to do a group buy... And they accept BTC!

vinylwasp

member

Activity: 97

Merit: 10

Quote from: Longsnowsm on December 30, 2016, 09:04:51 PM

Quote from: vinylwasp on December 30, 2016, 08:23:26 PM

Quote from: Longsnowsm on December 30, 2016, 05:44:10 PM

Well it looks like we have leaked photos and prices on the internet for the next miner to be released by Bitmain. The Antminer L3, 250mhs scrypt miner, 400watts at the wall.

If you can read Chinese you can buy one today from Bitmain's website for 11000 CNY or 1.656 BTC. ($1600 USD)

https://shop.bitmain.com/productDetail.htm?pid=00020161229040715306ygMSJQLh06C0

And the specs do look like they pull only 400w from the APW3-1600.

Given they've just about finished building this new DC https://blog.bitmain.com/en/bitmain-to-set-high-standards-with-state-of-the-art-xinjiang-data-center/, there goes the BTC/MHs rate again Cry

So Bitmain is telling customers inside China they are shipping January 5th. I wonder how long before we will get a chance to buy these... Huh

Would you like to hire an interpreter and drive another group-buy Longsnowsm?
.
.
.
.
.
.
.
.
Just kidding! Roll Eyes

Longsnowsm

hero member

Activity: 868

Merit: 517

Quote from: vinylwasp on December 30, 2016, 08:23:26 PM

Quote from: Longsnowsm on December 30, 2016, 05:44:10 PM

Well it looks like we have leaked photos and prices on the internet for the next miner to be released by Bitmain. The Antminer L3, 250mhs scrypt miner, 400watts at the wall.

If you can read Chinese you can buy one today from Bitmain's website for 11000 CNY or 1.656 BTC. ($1600 USD)

https://shop.bitmain.com/productDetail.htm?pid=00020161229040715306ygMSJQLh06C0

And the specs do look like they pull only 400w from the APW3-1600.

Given they've just about finished building this new DC https://blog.bitmain.com/en/bitmain-to-set-high-standards-with-state-of-the-art-xinjiang-data-center/, there goes the BTC/MHs rate again Cry

So Bitmain is telling customers inside China they are shipping January 5th. I wonder how long before we will get a chance to buy these... Huh

PanneKopp

sr. member

Activity: 391

Merit: 250

aka ...

quick math = no ROI

vinylwasp

member

Activity: 97

Merit: 10

Quote from: Longsnowsm on December 30, 2016, 05:44:10 PM

Well it looks like we have leaked photos and prices on the internet for the next miner to be released by Bitmain. The Antminer L3, 250mhs scrypt miner, 400watts at the wall.

If you can read Chinese you can buy one today from Bitmain's website for 11000 CNY or 1.656 BTC. ($1600 USD)

https://shop.bitmain.com/productDetail.htm?pid=00020161229040715306ygMSJQLh06C0

And the specs do look like they pull only 400w from the APW3-1600.

Given they've just about finished building this new DC https://blog.bitmain.com/en/bitmain-to-set-high-standards-with-state-of-the-art-xinjiang-data-center/, there goes the BTC/MHs rate again Cry

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: vinylwasp on December 30, 2016, 07:58:59 PM

Quote from: Longsnowsm on December 30, 2016, 05:44:10 PM

Capacity:L3Blade Server Architecture:230 mm (L) * 135 mm (W) * 158 mm (H)
L2 Cache Capacity:L3Interface Type:EthernetMax Processors:144
Processor Type:BM1485
Hash Rate:250Mh/s
Power Consumption:400 W
Mining Agreements:Scrypt algorithm all coins
Size:230 mm (L) * 135 mm (W) * 158 mm (H)
Total weight:3.5kgFan Size:12CM*1
Operating Temperature:0 to 40
Rated Voltage:DC 11.60 ~13.00V
Power connector:6PIN X 8

So it has 4 cards and each one draws 100w (400w/4).
Why then does it need 2 x 6pin connector per card?

Seems a little over engineered, no?

Or is that the power spec per card?

all bitmian miner after the S1 came with two PCIe plugs or more per board that I'm a ware of, even the S3 does/did but with the S3 you didn't need to use both plugs even my C1 which you could use one plug on each broad and still run at max speed with no issue , all it was a water cooled overclocked S3 , I stil have it and it works like it did when i bought it ,you could, i did because, it made me feel safer using all the plugs per board etc . the R1 and U3 didn't but are usb.

Quote

Given they've just about finished building this new DC https://blog.bitmain.com/en/bitmain-to-set-high-standards-with-state-of-the-art-xinjiang-data-center/, there goes the BTC/MHs rate again Cry

Sadly yea ..

crackfoo

legendary

Activity: 3556

Merit: 1126

ohh interesting. will be keeping an eye on this

vinylwasp

member

Activity: 97

Merit: 10

Quote from: Longsnowsm on December 30, 2016, 05:44:10 PM

Capacity:L3Blade Server Architecture:230 mm (L) * 135 mm (W) * 158 mm (H)
L2 Cache Capacity:L3Interface Type:EthernetMax Processors:144
Processor Type:BM1485
Hash Rate:250Mh/s
Power Consumption:400 W
Mining Agreements:Scrypt algorithm all coins
Size:230 mm (L) * 135 mm (W) * 158 mm (H)
Total weight:3.5kgFan Size:12CM*1
Operating Temperature:0 to 40
Rated Voltage:DC 11.60 ~13.00V
Power connector:6PIN X 8

So it has 4 cards and each one draws 100w (400w/4).
Why then does it need 2 x 6pin connector per card?

Seems a little over engineered, no?

Or is that the power spec per card?

CjMapope

legendary

Activity: 1820

Merit: 1092

~Full-Time Minter since 2016~

o nice here we go, ya man, i hope its reliable :/

im happy to see that they are using "BM1485" chips, that tells us that there could be potential for new Moonlanders! Cheesy

I had originally thought they would use "LK" BW chips.

Fricken eh, will be watching for one of these

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: Longsnowsm on December 30, 2016, 06:09:57 PM

Quote from: toptek on December 30, 2016, 06:03:42 PM

I knew they had one in works even said so a month or so back after bitmian put up a litecoin pool on there site, i knew it then, but my question now is it real this time ?. the L2 was suppose to do about the same speed but was a lot cheaper then im sure will be.IS this is a bitmain chip and not INNOSILICON A4 chip and it looks a lot like a A4 .. ?.

From the pictures they are certainly not using the Inno boards for this. So it is a completely new design, but who knows what chips they are using. Gonna get quite interesting around here! Grin

This is gonna hurt INNOSILICON A4 if it really does 400 watts @ 250 MH, the first few batches of a the A4 are 136 MH @ 500 watts and the 256 MH @ 1000 watts give or take a few .

so yea this gonna get very interesting to see if they try to take over Alt mining that includes if they some how come up with a miner that can do all alt coins, if they do say bye bye to GPU Mining for sure ,
I hope they don't ruin it for us.

notice i said I hope they don't and not they can't, if they can out do INNOSILICON like this they can, if they really want to . all ways remember nothing is impossible the sky is the limit .

Longsnowsm

hero member

Activity: 868

Merit: 517

Quote from: toptek on December 30, 2016, 06:03:42 PM

I knew they had one in works even said so a month or so back after bitmian put up a litecoin pool on there site, i knew it then, but my question now is it real this time ?. the L2 was suppose to do about the same speed but was a lot cheaper then im sure will be.IS this is a bitmain chip and not INNOSILICON A4 chip and it looks a lot like a A4 .. ?.

From the pictures they are certainly not using the Inno boards for this. So it is a completely new design, but who knows what chips they are using. Gonna get quite interesting around here! Grin

Found this on AliExpress:
The chip used is: Processor Type:BM1485

toptek

legendary

Activity: 1274

Merit: 1000

I knew they had one in works even said so a month or so back after bitmian put up a litecoin pool on there site, i knew it then, but my question now is it real this time ?. the L1 was suppose to do about the same speed but was a lot cheaper then im sure this will be.
IS this is a bitmain chip and not INNOSILICON A4 chip and it looks a lot like a A4 .. ?.

IF this is real it runs better then the A4 does at 256 MH and when the L1 went on sell it was suppose to do the same as the L3 is going to do ? . if i remember right.

ANTMINER L1
L1 for sales $5/MH/s ships in December 2014 or 15, I forget but never happen .
599 USD ( 0.625 BTC )

This price tag is 2k + sigh greed here we go again and bitmain trying to get it all. no wonder they dropped the fee for PPS Mining on there pool, why not with this coming out.

edit: the L1 if it had happen would have done 120 @ 380 watts, 3 of those still would have been better imo then a A 2 @ 110 mh or A4 at 256 mh by maybe 300 to 400 watts at the wall with more speed then the A2 and all most the same speed as the A4 together. I may try my Best to get a a few L3's.if it is real, i was gonna buy a few L1's even had the cash waiting.

guufullme

newbie

Activity: 14

Merit: 0

According to online calculators, we can earn millions of XMR if we use an ASIC. is that true?

bittawm

legendary

Activity: 1894

Merit: 1087

yummy

Longsnowsm

hero member

Activity: 868

Merit: 517

Well it looks like we have leaked photos and prices on the internet for the next miner to be released by Bitmain. The Antminer L3, 250mhs scrypt miner, 400watts at the wall.

Looks like Alibaba and some of the alternate channels are pricing it around $2300, which probably means a price near $1800-1900 directly from Bitmain. Just my guess. Looks like things are about to heat up in the Scrypt mining world.

Preliminary specs from AliExpress:
Products Status:Used,StockModel
Number:Antminer L3-250M
Type:BladeMax Memory Capacity:250Mh/s
RAM Type:L3HDD
Capacity:L3Blade Server Architecture:230 mm (L) * 135 mm (W) * 158 mm (H)
L2 Cache Capacity:L3Interface Type:EthernetMax Processors:144
Processor Type:BM1485
Hash Rate:250Mh/s
Power Consumption:400 W
Mining Agreements:Scrypt algorithm all coins
Size:230 mm (L) * 135 mm (W) * 158 mm (H)
Total weight:3.5kgFan Size:12CM*1
Operating Temperature:0 to 40
Rated Voltage:DC 11.60 ~13.00V
Power connector:6PIN X 8
Noise:60dB

If you are in a hurry to get one you can order on AliExpress:
https://www.aliexpress.com/item/ANTMINER-L3-LTC-miner-250M-newest-scrypt-miner-Litecoin-mining-machine-250M-400W-on-wall-better/32788307240.html?spm=2114.01010208.3.10.N5AC0a&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10068_10000009_10084_10083_10080_10082_10081_10060_10061_10062_10056_10055_10054_10059_10099_10078_10079_427_426_10103_10073_10102_10096_10052_10050_10107_10051_10106,searchweb201603_3,afswitch_5&btsid=80bbe765-18f8-4706-b784-b89b384417df

Top

Side 1:

Side 2:

Front:

Rear:

Topic: Antminer L3 - 250mh - 400watt Scrypt miner coming soon - page 59. (Read 137455 times)