Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 108. (Read 346285 times)

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

Uh yeah same way you would with any other device. You need access to the domain server records and just create an A record with the IP of the device.

Ok so if they are all on the same network router, would i have to set a different port for each?

Whatever you are planning, don't even think about opening ports up through your router to the miners on your network. Not only will your miners be compromised, your entire internal network will as well.

Minimum you want to do is use a VPN into your network and manage your miners that way.

Also, see port knocking: http://www.cipherdyne.org/fwknop/

Remember remember the 5th of November

legendary

Activity: 1862

Merit: 1011

Reverse engineer from time to time

With this price it's actually profitable to buy one of these, or is the price of 0.938 a bug? Do they still ship within 2 days and within a week it's here? I actually have found a spare PSU here of 500w it might work, and with the falling of BTC price of the device and USD/BTC, the VAT falls as well.

However I feel like difficulty is going to go up by 30%(S2 miners coming online soon, and tons of S1s sold due to price drop) per diff change, which makes it 5 months till ROI again.

aztecminer

legendary

Activity: 1092

Merit: 1000

Quote from: Biffa on March 21, 2014, 01:58:17 PM

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

Uh yeah same way you would with any other device. You need access to the domain server records and just create an A record with the IP of the device.

Ok so if they are all on the same network router, would i have to set a different port for each?

Whatever you are planning, don't even think about opening ports up through your router to the miners on your network. Not only will your miners be compromised, your entire internal network will as well.

Minimum you want to do is use a VPN into your network and manage your miners that way.

not totally true .. you could only allow those ips of your mining pool through the firewall on the open port that the mining pool uses, and you could put your ants in one vlan and limit the mining pool data to that one vlan through your firewall . if you have an ips then can monitor the traffic to the ants and have control of network traffic that way too. this probably not practical for home networks though.

to answer questions add new host (i prefer static ips) to dns server for each ant .. if these are behind a firewall then the firewall will need to have whatever port your ant is mining on to the mining pool opened as explained above. use vpn into the network to access the ants from outside the network .

Bitkoinzz

full member

Activity: 218

Merit: 100

Quote from: Bitkoinzz on March 21, 2014, 01:51:06 PM

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

Uh yeah same way you would with any other device. You need access to the domain server records and just create an A record with the IP of the device.

Ok so if they are all on the same network router, would i have to set a different port for each?

Whatever you are planning, don't even think about opening ports up through your router to the miners on your network. Not only will your miners be compromised, your entire internal network will as well.

Minimum you want to do is use a VPN into your network and manage your miners that way.

I think you can use NO-IP.org. I use them for internet access to myIP cameras at home

Guys, these miners are not designed to be out on the open internet for anyone to access. There is no reason for them to be, you are just asking for trouble.

However the S1's do have a firewall on them too. I think you can do this using NO-IP.org. I have IP cameras watching my house and I can access them from the internet

ionux

full member

Activity: 140

Merit: 100

Quote from: Bitkoinzz on March 21, 2014, 01:51:06 PM

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

itsatrap.jpg

Biffa

legendary

Activity: 3234

Merit: 1220

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

Uh yeah same way you would with any other device. You need access to the domain server records and just create an A record with the IP of the device.

Ok so if they are all on the same network router, would i have to set a different port for each?

Whatever you are planning, don't even think about opening ports up through your router to the miners on your network. Not only will your miners be compromised, your entire internal network will as well.

Minimum you want to do is use a VPN into your network and manage your miners that way.

I think you can use NO-IP.org. I use them for internet access to myIP cameras at home

Guys, these miners are not designed to be out on the open internet for anyone to access. There is no reason for them to be, you are just asking for trouble.

Bitkoinzz

full member

Activity: 218

Merit: 100

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

Uh yeah same way you would with any other device. You need access to the domain server records and just create an A record with the IP of the device.

Ok so if they are all on the same network router, would i have to set a different port for each?

Whatever you are planning, don't even think about opening ports up through your router to the miners on your network. Not only will your miners be compromised, your entire internal network will as well.

Minimum you want to do is use a VPN into your network and manage your miners that way.

I think you can use NO-IP.org. I use them for internet access to myIP cameras at home

Biffa

legendary

Activity: 3234

Merit: 1220

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

Uh yeah same way you would with any other device. You need access to the domain server records and just create an A record with the IP of the device.

Ok so if they are all on the same network router, would i have to set a different port for each?

Whatever you are planning, don't even think about opening ports up through your router to the miners on your network. Not only will your miners be compromised, your entire internal network will as well.

Minimum you want to do is use a VPN into your network and manage your miners that way.

Tikii

newbie

Activity: 50

Merit: 0

Quote from: Bitkoinzz on March 21, 2014, 01:03:19 PM

Anyone knows how to connect the web interface of the ants to a domain ie: ant.mydomain.com

Uh yeah same way you would with any other device. You need access to the domain server records and just create an A record with the IP of the device.

Ok so if they are all on the same network router, would i have to set a different port for each?

Marcolinux89

newbie

Activity: 12

Merit: 0

OK WHAT IT THE OPINION OF THE FORUM AND BITMAIN.. SHOULD WE PLACE AN ORDERS ON BITMAIN TODAY OR WAIT? Cheesy

in my opinion it is better to wait
I placed an order this morning and I have no news yet

Biffa

legendary

Activity: 3234

Merit: 1220