My 9th feb order has shipped today.
my 3th feb order status Unshipped today!! why..?
Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 201. (Read 346284 times)
February 12, 2014, 08:15:09 AM
my 3th feb order status Unshipped today!! why..?
February 12, 2014, 08:09:07 AM
Hello,
Is in this new board version PCI-E connector? Or power supply wire must be cutted?
Thank you
Any S1 from the last ~2months comes with plugs to just plug pci-e cables in. Is in this new board version PCI-E connector? Or power supply wire must be cutted?
Thank you
February 12, 2014, 08:03:12 AM
Hello,
Is in this new board version PCI-E connector? Or power supply wire must be cutted?
Thank you
Is in this new board version PCI-E connector? Or power supply wire must be cutted?
Thank you
February 12, 2014, 04:48:44 AM
Any option for a good aftermarket 120mm case fan for s1
Corsair sp120 that has static pressure
February 12, 2014, 04:30:40 AM
The S1 now shows as Out of stock. Any bets on when it will start shipping again? Not sure how I'm supposed to interpret the thing about the 13th
February 12, 2014, 02:20:28 AM
I'd like to consolidate some information on the temperature you guys are seeing.
I'm getting 49 and 51 Celsius overclocked at 400mhz to 200ghs.
Also I replaced the stock fan for dual fans in the front and back @ 69cfm 2000rpm. It runs quiter now, but the temps are a bit higher than with the stock fan plus one of these fans in the front.
http://www.amazon.com/gp/product/B0026ZPFCK/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1
Also, what is the maximum cut off temperature?
I'm getting 49 and 51 Celsius overclocked at 400mhz to 200ghs.
Also I replaced the stock fan for dual fans in the front and back @ 69cfm 2000rpm. It runs quiter now, but the temps are a bit higher than with the stock fan plus one of these fans in the front.
http://www.amazon.com/gp/product/B0026ZPFCK/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1
Also, what is the maximum cut off temperature?
It is in the cgminer settings temp target is 60c cut off is 70c.
February 12, 2014, 02:17:34 AM
i don't think anyone has hit thermal cutoff to my recollection of following the threads. i think the antminer cgminer driver cuts off at 95. Seems that 125 is the max for the asic.
https://github.com/AntMiner/AntGen1/blob/master/datasheet/BM1380_Datasheet.pdf
Mine all run in the mid 40s.
https://github.com/AntMiner/AntGen1/blob/master/datasheet/BM1380_Datasheet.pdf
Mine all run in the mid 40s.
February 12, 2014, 02:04:14 AM
I'd like to consolidate some information on the temperature you guys are seeing.
I'm getting 49 and 51 Celsius overcoled to 200ghs.
Also, what is the maximum cut off temperature?
I'm getting 49 and 51 Celsius overcoled to 200ghs.
Also, what is the maximum cut off temperature?
49°C at 23°C room temp, fan at 1980 rpm (my living room)
38°C at 12°C room temp, fan at 1620 rpm (my mining room)
No overclock (350 MHz)
February 12, 2014, 01:57:12 AM
I'd like to consolidate some information on the temperature you guys are seeing.
I'm getting 49 and 51 Celsius overclocked at 400mhz to 200ghs.
Also I replaced the stock fan for dual fans in the front and back @ 69cfm 2000rpm. It runs quiter now, but the temps are a bit higher than with the stock fan plus one of these fans in the front.
http://www.amazon.com/gp/product/B0026ZPFCK/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1
Also, what is the maximum cut off temperature?
I'm getting 49 and 51 Celsius overclocked at 400mhz to 200ghs.
Also I replaced the stock fan for dual fans in the front and back @ 69cfm 2000rpm. It runs quiter now, but the temps are a bit higher than with the stock fan plus one of these fans in the front.
http://www.amazon.com/gp/product/B0026ZPFCK/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1
Also, what is the maximum cut off temperature?
February 12, 2014, 01:25:26 AM
How is the noise of miner ?
Is very loud?
Is an AntMiner S1 louder than a BFL Single?Is very loud?
February 12, 2014, 01:23:42 AM
Is an AntMiner S1 louder than a BFL Single?
It depends on your room temperature, it's very variable on the S1
February 12, 2014, 01:22:19 AM
How is the noise of miner ?
Is very loud?
Is an AntMiner S1 louder than a BFL Single? Is very loud?
February 11, 2014, 11:41:52 PM
Paid at 3:30 AM Eastern Standard time Feb. 11th.
Haven't received any confirmation emails yet, 20 hrs later.
This is normal right?
Haven't received any confirmation emails yet, 20 hrs later.
This is normal right?
I haven't gotten an email about shipping but MyUPS shows it was shipped a couple days ago.
February 11, 2014, 11:39:51 PM
Paid at 3:30 AM Eastern Standard time Feb. 11th.
Haven't received any confirmation emails yet, 20 hrs later.
This is normal right?
February 11, 2014, 05:01:37 PM
Any option for a good aftermarket 120mm case fan for s1
I don't know if you're interested in modifying the Antminer S1 to add 4 "quiet" fans which will cool the Ant down and slow down the stock fan in the process.
https://bitcointalksearch.org/topic/youtube-video-how-to-improve-cooling-on-antminer-s1-445765
Also in my signature.
The YouTube video has the links to the parts/fans available on ebay.
February 11, 2014, 04:25:18 PM
Well... The one I got yesterday looked completely new - not a speck of dust on it. The second blade wasn't completely plugged in. 100% perfect order - but check the cables before powering it up :-)
Also had the quirk with 1 of the ants I got today. Symptom was when powered on, no lights, fan at full speed. One blade was not connected.
February 11, 2014, 04:08:32 PM
Any option for a good aftermarket 120mm case fan for s1
February 11, 2014, 03:55:10 PM
My 9th feb order has shipped today.
February 11, 2014, 03:50:23 PM
The AntMiner has a variable-speed (PWM) fan. It is rather quiet if your room is around +20..+23'C, but does get very loud if the ambient temperature rises to around and above +25'C. It does produce heat (equivalent to a 360 watt heater?), so if you don't have any cooling available and you're planning to put it in anything less than a hall, I would seriously reconsider it if you are bothered by fan sound. You might want to look into more/additional silent fans (a 2nd fan) to keep the S1 cool and the primary fan speeds down.
February 11, 2014, 03:42:43 PM
How is the noise of miner ?
Is very loud?
you will need to turn you speakers up full blast to hear itIs very loud?
http://www.youtube.com/watch?v=P9zkA7NkJDU
Ok the ants are much much quieter than an Avalon. That sounds being outside a football stadium after the game.
the really are something else in terms of sound, that video scares me really..... My girl would kill me if i chucked that in my mining room
Jump to: