Pages:
Author

Topic: [Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s - page 41. (Read 346286 times)

legendary
Activity: 3766
Merit: 1742
Join the world-leading crypto sportsbook NOW!
thanks for the info... seems like wifi is my only option for now... unless i can set these up in my brothers place and hardware them in... any suggestions for hubs since his router can only host 5 ethernet cables? that being said is there a link for some quality antennas i can pick up if i can't set these up @ my brothers place?

also this is the rack i was looking at http://www.canadiantire.ca/en/pdp/3-tier-chrome-wire-shelf-0680324p.html#.U2zDL1f_lVY simple and basic for only 8 units... would that work or no?

Rather than WiFi, if you can't get an Ethernet cable from the miner back to your router consider using a couple of network over powerline adapters.  I use a couple of Trendnet AV500 adapters to get networking to a streaming media box in my kitchen.  Works like a charm and averages about 190Mbs.  Much better connection than WiFi.  If I ever pull the gun on a S1 it will end up in my basement on another AV500 adapter.

quite interesting but how would that work for 8 units? would i need 9 adapters total? one for the router and the other 8 for the miners?

Of course you can use a 16 ports switch between those 8 anties and the powerline Wink
newbie
Activity: 44
Merit: 0
thanks for the info... seems like wifi is my only option for now... unless i can set these up in my brothers place and hardware them in... any suggestions for hubs since his router can only host 5 ethernet cables? that being said is there a link for some quality antennas i can pick up if i can't set these up @ my brothers place?

also this is the rack i was looking at http://www.canadiantire.ca/en/pdp/3-tier-chrome-wire-shelf-0680324p.html#.U2zDL1f_lVY simple and basic for only 8 units... would that work or no?

Rather than WiFi, if you can't get an Ethernet cable from the miner back to your router consider using a couple of network over powerline adapters.  I use a couple of Trendnet AV500 adapters to get networking to a streaming media box in my kitchen.  Works like a charm and averages about 190Mbs.  Much better connection than WiFi.  If I ever pull the gun on a S1 it will end up in my basement on another AV500 adapter.

quite interesting but how would that work for 8 units? would i need 9 adapters total? one for the router and the other 8 for the miners?
sr. member
Activity: 401
Merit: 250
thanks for the info... seems like wifi is my only option for now... unless i can set these up in my brothers place and hardware them in... any suggestions for hubs since his router can only host 5 ethernet cables? that being said is there a link for some quality antennas i can pick up if i can't set these up @ my brothers place?

also this is the rack i was looking at http://www.canadiantire.ca/en/pdp/3-tier-chrome-wire-shelf-0680324p.html#.U2zDL1f_lVY simple and basic for only 8 units... would that work or no?

Rather than WiFi, if you can't get an Ethernet cable from the miner back to your router consider using a couple of network over powerline adapters.  I use a couple of Trendnet AV500 adapters to get networking to a streaming media box in my kitchen.  Works like a charm and averages about 190Mbs.  Much better connection than WiFi.  If I ever pull the gun on a S1 it will end up in my basement on another AV500 adapter.
legendary
Activity: 3766
Merit: 1742
Join the world-leading crypto sportsbook NOW!
Silly question but buying directly from the website, is shipping included in the price?

Yes
hero member
Activity: 784
Merit: 504
Silly question but buying directly from the website, is shipping included in the price?

Yes including shipping. You need to pay customs duty of your country.
hero member
Activity: 658
Merit: 500
CCNA: There i fixed the internet.
Silly question but buying directly from the website, is shipping included in the price?
legendary
Activity: 2324
Merit: 1039
Hey guys brand new user here... I had a couple of questions (my apologies if this is not the right forum to ask them on) about this miner as my brother and I will be picking up 8 soon... I will be honest I was very hesitant at first but after reading a few pages it seems like Bitmain is quite legit...

1) i assume we will need 8 PSU's for the miners - which ones are recommended - I do plan on OC'ing them after the 3 month warranty is up - is that wise or are there known issues after OC'ing these miners?

2) i planned on getting a simple metal wire shelf to prop them all on but am considering tossing them in cases - any recommendations? how many miners can fit in an individual case?

3) are there instructions to enable the wifi on it?

thanks in advance...

1) this psu runs 3 over clocked http://www.rakuten.com/prod/evga-supernova-1300-g2-1300w-power-supply-110-v-ac-220-v-ac-input/249973555.html
2)  depends on the case not that many setup in cases if you have a wide shelf it is better I will find a link

https://bitcointalksearch.org/topic/reward-for-answers-50th-s1-farm-601245  a lot of good info here

3)Don't do wifi.  Very few success stories.  Not that you can't get it to work but that you need to hookup an antenna  many drop outs slower hash rate.    If you read the setup threads you will see very few people using the wifi.

thanks for the info... seems like wifi is my only option for now... unless i can set these up in my brothers place and hardware them in... any suggestions for hubs since his router can only host 5 ethernet cables? that being said is there a link for some quality antennas i can pick up if i can't set these up @ my brothers place?

also this is the rack i was looking at http://www.canadiantire.ca/en/pdp/3-tier-chrome-wire-shelf-0680324p.html#.U2zDL1f_lVY simple and basic for only 8 units... would that work or no?

Pick up wifi bridge and wired them by ethernet cable.
The easiest way if it's about wifi. But i wouldn't go wifi. Cable is the best option.
newbie
Activity: 44
Merit: 0
Hey guys brand new user here... I had a couple of questions (my apologies if this is not the right forum to ask them on) about this miner as my brother and I will be picking up 8 soon... I will be honest I was very hesitant at first but after reading a few pages it seems like Bitmain is quite legit...

1) i assume we will need 8 PSU's for the miners - which ones are recommended - I do plan on OC'ing them after the 3 month warranty is up - is that wise or are there known issues after OC'ing these miners?

2) i planned on getting a simple metal wire shelf to prop them all on but am considering tossing them in cases - any recommendations? how many miners can fit in an individual case?

3) are there instructions to enable the wifi on it?

thanks in advance...

1) this psu runs 3 over clocked http://www.rakuten.com/prod/evga-supernova-1300-g2-1300w-power-supply-110-v-ac-220-v-ac-input/249973555.html
2)  depends on the case not that many setup in cases if you have a wide shelf it is better I will find a link

https://bitcointalksearch.org/topic/reward-for-answers-50th-s1-farm-601245  a lot of good info here

3)Don't do wifi.  Very few success stories.  Not that you can't get it to work but that you need to hookup an antenna  many drop outs slower hash rate.    If you read the setup threads you will see very few people using the wifi.

thanks for the info... seems like wifi is my only option for now... unless i can set these up in my brothers place and hardware them in... any suggestions for hubs since his router can only host 5 ethernet cables? that being said is there a link for some quality antennas i can pick up if i can't set these up @ my brothers place?

also this is the rack i was looking at http://www.canadiantire.ca/en/pdp/3-tier-chrome-wire-shelf-0680324p.html#.U2zDL1f_lVY simple and basic for only 8 units... would that work or no?
full member
Activity: 161
Merit: 100
digging in the bits... now ant powered!
@Bitmain

Thanks, got my 2 Antminers nice and quick!

Only problem I have is one of the Blades has failed ASIC's.. there are 3 x's

Can anything be done about this?


Thanks
full member
Activity: 238
Merit: 100
Kia ora!
hware_error = ((HW / (HW + DiffA + DiffR)) * 100)

( (466 / ( 466 + 171648 + 16 ) x 100 ) = 0.27% error rate
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
Hey guys brand new user here... I had a couple of questions (my apologies if this is not the right forum to ask them on) about this miner as my brother and I will be picking up 8 soon... I will be honest I was very hesitant at first but after reading a few pages it seems like Bitmain is quite legit...

1) i assume we will need 8 PSU's for the miners - which ones are recommended - I do plan on OC'ing them after the 3 month warranty is up - is that wise or are there known issues after OC'ing these miners?

2) i planned on getting a simple metal wire shelf to prop them all on but am considering tossing them in cases - any recommendations? how many miners can fit in an individual case?

3) are there instructions to enable the wifi on it?

thanks in advance...

1) this psu runs 3 over clocked http://www.rakuten.com/prod/evga-supernova-1300-g2-1300w-power-supply-110-v-ac-220-v-ac-input/249973555.html
2)  depends on the case not that many setup in cases if you have a wide shelf it is better I will find a link

https://bitcointalksearch.org/topic/reward-for-answers-50th-s1-farm-601245  a lot of good info here

3)Don't do wifi.  Very few success stories.  Not that you can't get it to work but that you need to hookup an antenna  many drop outs slower hash rate.    If you read the setup threads you will see very few people using the wifi.
newbie
Activity: 44
Merit: 0
Hey guys brand new user here... I had a couple of questions (my apologies if this is not the right forum to ask them on) about this miner as my brother and I will be picking up 8 soon... I will be honest I was very hesitant at first but after reading a few pages it seems like Bitmain is quite legit...

1) i assume we will need 8 PSU's for the miners - which ones are recommended - I do plan on OC'ing them after the 3 month warranty is up - is that wise or are there known issues after OC'ing these miners?

2) i planned on getting a simple metal wire shelf to prop them all on but am considering tossing them in cases - any recommendations? how many miners can fit in an individual case?

3) are there instructions to enable the wifi on it?

thanks in advance...
legendary
Activity: 1036
Merit: 1000
DARKNETMARKETS.COM
New price for AntMiner S1: 0.5 btc each one, shipping cost included.

Is there an option to disable WiFi in antminer S1 ?

WiFi is disabled by default. Only cable is operating by default.
full member
Activity: 238
Merit: 100
Kia ora!
New price for AntMiner S1: 0.5 btc each one, shipping cost included.

Bitmain. Are you still doing coupons for these S1's?
hero member
Activity: 784
Merit: 504
New price for AntMiner S1: 0.5 btc each one, shipping cost included.

Is there an option to disable WiFi in antminer S1 ?
hero member
Activity: 741
Merit: 514
https://www.bitmain.com
New price for AntMiner S1: 0.5 btc each one, shipping cost included.
hero member
Activity: 635
Merit: 500
Mine shipped on the 6th and just made it to Alaska Wink Should be here tomorrow (SE US). Seems pretty fast to me after confirmation. I think I have had Prime orders take longer.
My Corsair CM750 just came in too so I should be good. Having seconds thoughts about my PSU buy though. I was thinking I could run two off that, but I'm not sure anymore. I may just order another CM600 for a second Ant.

2x S1 units will run just fine on a Corsair 750w PSU Wink


Thanks for all the input!

Not overclocked I presume?

Not a standard 750w 80 Plus PSU but an 80 Plus Gold (or better) PSU should just barely work for 2x OC S1's

These will run 2 OC'ed without a problem
http://minersource.net/products/dell-750w-psu-slash-adapter

How loud is that Dell server PSU??  I'm in the same room as my miners all day.

Can't stay in the same room at default. Or put a potenciometer or resistor between 2 pins (I can't remember to wich ones but you can find on forum somewhere) and you'll get less noise  and slow fan.
newbie
Activity: 54
Merit: 0
@Ranjha

I once had 3 Antminers S1 stuck in Mumbai because of mechanical problems of UPS plain according to UPS themself.
BITMAIN compensate every one of that shipment with coupons which I have used all of them  them with pleasure.
It wasn't BITMAIN fault but UPS, it was a good sign from BITMAIN to compensate people.

I sold every S1 I had in the Netherlands, I still have KnC Jupiters running in The Netherlands.
I am in China at the moment setting up a farm with Dragon 1T miners.
No import tax and shipping costs and low electricity rates.
I am planning to host other people miners as well if there is interests.
Nice to know you are setting up the miner in other countries but if you are just setting in china because of high electricity rate just see at once
https://bitcointalksearch.org/topic/mining-with-40-of-electricity-bill-590134
I have to buy some more antminer i hope bitmaintech will compensate with coupons.
hero member
Activity: 674
Merit: 500


Using facebook in the year of our lord 2014 A.D.

Nigger you dun goofed!

full member
Activity: 125
Merit: 100
Got it about 30 min ago and hashing away guys! Ant looks old as hell, but working.

Picked up a thermaltake fan at Radio Shack. Working great and quiet so far. Temp 42. Ambient in this room is 71.9 ATM. Had a few X on ASIC status, but looks like all zeros now.




Pages:
Jump to: