ANTMINER S3+ Discussion and Support Thread - page 239.

kaltar

sr. member

Activity: 805

Merit: 250

Quote from: 1Neptune on August 19, 2014, 08:36:01 PM

Quote from: hurricandave on August 19, 2014, 08:20:52 PM

Quote from: jimmyoh on August 19, 2014, 07:51:29 PM

Quote from: sjc1490 on August 19, 2014, 07:30:14 PM

Quote from: OneCardShy on August 19, 2014, 06:50:18 PM

Okay. I don't want to start rumors, so somebody else, PLEASE investigate...

I ordered from Bitmain directly for the first time within minutes of the S3+ going up for sale. I can now view my order, but the edit button has gone away.

From lurking in the forums, I have read that the Edit button going away always meant that things were about to ship.

The S3+ isn't slated to ship until on or around Sept 20th.

Has anybody else's Edit button gone away for their S3+ order, and could that really mean that things are going to be happening soon??

Interested in the opinion of those who have done this before...

Thx.

-OCS

Mine has been missing for several days now, don't hold your breath.

+1

The next reason is the website is about to be updated with either a price change or the batch is sold out and the next batch is about to be listed.

Just checked. Web site still says for both S3 B8 and S1 upgrade: "Shipping starts on September 20th or earlier."

The "earlier" part probably won't be early enough for those holding their breath.

I know, i already passed out twice by holding my breathy and nothing shipped yet Shocked

Reynaldo

legendary

Activity: 1143

Merit: 1000

Anyone bought from Bitmain pre buy from Amazon (Batch 7)? Order date of arrival for me is 22-26 but no shipping yet.. :l

topcat888

newbie

Activity: 8

Merit: 0

Hummm, strange one here, updated two S3/B4's and two S3/B5's to latest firmware this morning, all went well and initially all four will hash at 500GH/s using 250M...
however after a while (30 mins or so) one of the S3/B5's always drops back to 458GH/s (from 500)..? There are no x's or -'s, as per screen shot...

One Seasonic X-1050 PSU for each pair of miners...

Any Ideas..?

https://www.dropbox.com/s/67xnf8jooxmu380/Miner3.jpg

https://www.dropbox.com/s/jlb8lc4ppkv891t/List.jpg

https://www.dropbox.com/s/utqyflm292k6fip/Graph.jpg

moss

member

Activity: 98

Merit: 10

Quote from: 1Neptune on August 20, 2014, 05:10:14 AM

Quote from: moss on August 20, 2014, 03:40:13 AM

Quote from: Gogreen on August 19, 2014, 10:00:46 PM

Quote from: mjk79 on August 19, 2014, 09:32:49 PM

Is there a safe shutdown command, like a "Halt" for these? Either for web Gui or ssh?

I usually unplug the rj45 cable and let the s3 came to an idle not hashing mode and my psu fan stop spinning then I turn off

Thanks for the tip.

It always seems so abrupt to just turn the things off on full stream.

Better is to ssh into the miner, then issue the following command:

poweroff -d 3

This instructs the miner to stop all processes in an orderly fashion then wait for the power switch to be turned off. The "3" instructs it to power off with a 3 second delay. You could also use "5" or "1" or whatever time interval you want. You should see the fan(s) stop as well, which is usually a good visual clue to turn off the power switch on your power supply.

Many thanks. I'll do that next time.

mazedk

sr. member

Activity: 457

Merit: 250

I saw that bitmain released cgminer..

Does this mean we'll eventually be able to run auto-tuning enabled on our miners?

1Neptune

sr. member

Activity: 241

Merit: 250

Quote from: moss on August 20, 2014, 03:40:13 AM

Quote from: Gogreen on August 19, 2014, 10:00:46 PM

Quote from: mjk79 on August 19, 2014, 09:32:49 PM

Is there a safe shutdown command, like a "Halt" for these? Either for web Gui or ssh?

I usually unplug the rj45 cable and let the s3 came to an idle not hashing mode and my psu fan stop spinning then I turn off

Thanks for the tip.

It always seems so abrupt to just turn the things off on full stream.

Better is to ssh into the miner, then issue the following command:

poweroff -d 3

This instructs the miner to stop all processes in an orderly fashion then wait for the power switch to be turned off. The "3" instructs it to power off with a 3 second delay. You could also use "5" or "1" or whatever time interval you want. You should see the fan(s) stop as well, which is usually a good visual clue to turn off the power switch on your power supply.

moss

member

Activity: 98

Merit: 10

Quote from: Gogreen on August 19, 2014, 10:00:46 PM

Quote from: mjk79 on August 19, 2014, 09:32:49 PM

Is there a safe shutdown command, like a "Halt" for these? Either for web Gui or ssh?

I usually unplug the rj45 cable and let the s3 came to an idle not hashing mode and my psu fan stop spinning then I turn off

Thanks for the tip.

It always seems so abrupt to just turn the things off on full stream.

Antuam

legendary

Activity: 1722

Merit: 1005

Quote from: RanjithHarsha77 on August 20, 2014, 12:46:21 AM

please see this image http://imgur.com/4Mgq0ME

this is a Box of my psu.

please check and tell that PSI-E cable is 12v or 5v

thank you

Corsair is the best power supply for my.

You can use any converter to molex aor Sata to PCIe.

http://www.amazon.es/s/?ie=UTF8&keywords=pci+e+6+pin&tag=hydes-21&index=aps&hvadid=48349771870&hvpos=1t2&hvexid=&hvnetw=g&hvrand=3132629927815241907&hvpone=&hvptwo=&hvqmt=b&hvdev=t&ref=pd_sl_2se9vr32u1_b

But be careful, you only can connect one S3 without OC and nothing more.

Regards.
Antuam

mjk79

newbie

Activity: 25

Merit: 0

Quote from: RanjithHarsha77 on August 20, 2014, 12:46:21 AM

please see this image http://imgur.com/4Mgq0ME

this is a Box of my psu.

please check and tell that PSI-E cable is 12v or 5v

thank you

It's 12v. I believe the 5v is for the CPU cable.

That psu though will only power 1 S3.

RanjithHarsha77

newbie

Activity: 9

Merit: 0

please see this image http://imgur.com/4Mgq0ME

this is a Box of my psu.

please check and tell that PSI-E cable is 12v or 5v

thank you

PlanetCrypto

sr. member

Activity: 462

Merit: 250

Gogreen

sr. member

Activity: 392

Merit: 250

Who got their s3 ungrade kit? Post your setup video for us?

Duce

full member

Activity: 175

Merit: 100

Quote from: Koontas on August 19, 2014, 11:01:11 PM

Quote from: bjalbert on August 19, 2014, 10:43:56 PM

Quote from: Koontas on August 19, 2014, 10:40:57 PM

Just updated to the 0811 firmware and there is no longer anything displaying under "Frequency" and the miners are hashing at less than 100gh/s... Any ideas?

(Apologies if this was covered somewhere in this long ass thread)

When you flash uncheck save settings and it will fix the problem. there may be other ways but that is what I did.

Thank you.

The other way is to select the Miner Configuration tab then select the NEW Advance Settings tab where you have a pull-down to select your frequency, the default is 218.75. Once you select the default or the frequency you were running before select the Save & Apply in the bottom right hand section of the window and you should be good to go. Most if not all of them went to 100GH/s after the update.

Koontas

hero member

Activity: 784

Merit: 502

Quote from: bjalbert on August 19, 2014, 10:43:56 PM

Quote from: Koontas on August 19, 2014, 10:40:57 PM

Just updated to the 0811 firmware and there is no longer anything displaying under "Frequency" and the miners are hashing at less than 100gh/s... Any ideas?

(Apologies if this was covered somewhere in this long ass thread)

When you flash uncheck save settings and it will fix the problem. there may be other ways but that is what I did.

Thank you.

bjalbert

full member

Activity: 166

Merit: 100

Quote from: Koontas on August 19, 2014, 10:40:57 PM

Just updated to the 0811 firmware and there is no longer anything displaying under "Frequency" and the miners are hashing at less than 100gh/s... Any ideas?

(Apologies if this was covered somewhere in this long ass thread)

When you flash uncheck save settings and it will fix the problem. there may be other ways but that is what I did.

Koontas

hero member

Activity: 784

Merit: 502

Just updated to the 0811 firmware and there is no longer anything displaying under "Frequency" and the miners are hashing at less than 100gh/s... Any ideas?

(Apologies if this was covered somewhere in this long ass thread)

Gogreen

sr. member

Activity: 392

Merit: 250

Quote from: mjk79 on August 19, 2014, 09:32:49 PM

Is there a safe shutdown command, like a "Halt" for these? Either for web Gui or ssh?

I usually unplug the rj45 cable and let the s3 came to an idle not hashing mode and my psu fan stop spinning then I turn off

mjk79

newbie

Activity: 25

Merit: 0

Is there a safe shutdown command, like a "Halt" for these? Either for web Gui or ssh?

1Neptune

sr. member

Activity: 241

Merit: 250

Quote from: hurricandave on August 19, 2014, 08:20:52 PM

Quote from: jimmyoh on August 19, 2014, 07:51:29 PM

Quote from: sjc1490 on August 19, 2014, 07:30:14 PM

Quote from: OneCardShy on August 19, 2014, 06:50:18 PM

Okay. I don't want to start rumors, so somebody else, PLEASE investigate...

I ordered from Bitmain directly for the first time within minutes of the S3+ going up for sale. I can now view my order, but the edit button has gone away.

From lurking in the forums, I have read that the Edit button going away always meant that things were about to ship.

The S3+ isn't slated to ship until on or around Sept 20th.

Has anybody else's Edit button gone away for their S3+ order, and could that really mean that things are going to be happening soon??

Interested in the opinion of those who have done this before...

Thx.

-OCS

Mine has been missing for several days now, don't hold your breath.

+1

The next reason is the website is about to be updated with either a price change or the batch is sold out and the next batch is about to be listed.

Just checked. Web site still says for both S3 B8 and S1 upgrade: "Shipping starts on September 20th or earlier."

The "earlier" part probably won't be early enough for those holding their breath.

hurricandave

legendary

Activity: 966

Merit: 1003

Quote from: jimmyoh on August 19, 2014, 07:51:29 PM

Quote from: sjc1490 on August 19, 2014, 07:30:14 PM

Quote from: OneCardShy on August 19, 2014, 06:50:18 PM

Okay. I don't want to start rumors, so somebody else, PLEASE investigate...

I ordered from Bitmain directly for the first time within minutes of the S3+ going up for sale. I can now view my order, but the edit button has gone away.

From lurking in the forums, I have read that the Edit button going away always meant that things were about to ship.

The S3+ isn't slated to ship until on or around Sept 20th.

Has anybody else's Edit button gone away for their S3+ order, and could that really mean that things are going to be happening soon??

Interested in the opinion of those who have done this before...

Thx.

-OCS

Mine has been missing for several days now, don't hold your breath.

+1

The next reason is the website is about to be updated with either a price change or the batch is sold out and the next batch is about to be listed.

Topic: ANTMINER S3+ Discussion and Support Thread - page 239. (Read 710164 times)