Hi,
my ants (batch 1) are giving me only a 75% awarded shares on the Eligius pool.
Anyone having the same issue? How to address this?
Thanks,
HR
Topic: ANTMINER S3+ Discussion and Support Thread - page 354. (Read 710164 times)
@Biodom
It is when you go in to your my choice account and go to Change Delivery. You can have them Hold for pickup. So for me who ever did it new they were only 4 Antminers at the local warehouse even before I did.
It is when you go in to your my choice account and go to Change Delivery. You can have them Hold for pickup. So for me who ever did it new they were only 4 Antminers at the local warehouse even before I did.
I don't want to point fingers, but don't you need a password to do this? "friend" or "estrange gilrlfriend" looks likelier than a random UPS guy.
Just saying....
No Problem, and no old Girlfriends to worry about, and for the password if you are on the outside of UPS server network you do need one but if you are within the network you do not. After all how else can they look things up for you and change them without asking for your password when you call them. I did let Bitmain know and hope they can get the police involved. UPS should have video of the pickup area so I hope they can get a copy of that so I can see just who it was.
Most excellent.. Do you live in Shenzhen? 
That was quick.
That was quick.I got my S3 batch 4 yesterday and got it online this afternoon. Running for 6 hours now at 440.78 GH/s on Slush's Pool. Wattage at the wall is 357.9. Relatively quite and putting out about as much heat as a Block Erupter Cube. I couldn't find the IP address in my router, so I used a program called ipscan and found it. Set up 3 pools for failover, disabled the beep and Bob's your uncle. I'm using a Corsair 850 with just two plugs at the rear. Easy setup, no x anywhere and a solid performer. Early delivery to boot. Experience is excellent so far. Looks like a good idea to order another.
I got my S3 batch 4 yesterday and got it online this afternoon. Running for 6 hours now at 440.78 GH/s on Slush's Pool. Wattage at the wall is 357.9. Relatively quite and putting out about as much heat as a Block Erupter Cube. I couldn't find the IP address in my router, so I used a program called ipscan and found it. Set up 3 pools for failover, disabled the beep and Bob's your uncle. I'm using a Corsair 850 with just two plugs at the rear. Easy setup, no x anywhere and a solid performer. Early delivery to boot. Experience is excellent so far. Looks like a good idea to order another.
Any news about upgrade S3 ?
i dont think they'll releasing the upgrade option so sooni think it'll be when their sale isn't going to sold out
@Biodom
It is when you go in to your my choice account and go to Change Delivery. You can have them Hold for pickup. So for me who ever did it new they were only 4 Antminers at the local warehouse even before I did.
It is when you go in to your my choice account and go to Change Delivery. You can have them Hold for pickup. So for me who ever did it new they were only 4 Antminers at the local warehouse even before I did.
I don't want to point fingers, but don't you need a password to do this? "friend" or "estrange gilrlfriend" looks likelier than a random UPS guy.
Just saying....
How can I disable the timeout on the web console for the s3's?
yes
0 0,6,12,18 * * *
or
0 */6 * * *
both will run every 6 hours
or
0 */6 * * *
both will run every 6 hours
Nice. Thanks.
So does this mean every 3 minutes?
*/3 * * * * /usr/bin/cgminer-monitor
0 0,6,12,18 * * *
or
0 */6 * * *
both will run every 6 hours
or
0 */6 * * *
both will run every 6 hours
In case anyone wants it I setup a batch file to reboot my miner. This can then be setup as a scheduled task. I am supposed to go on a weeks vacation and I honestly don't trust these things to maintain a hashrate for that long. Sometimes they are good for 24 hours or longer but eventually they always crash to sub 400 hashrate and require a reboot to recover.
If you installed putty to SSH to your miner then you have plink so all you need is the batch file. Just adjust the IP as necessary. If you didn't install putty then you need to install it for this to work.
If you installed putty to SSH to your miner then you have plink so all you need is the batch file. Just adjust the IP as necessary. If you didn't install putty then you need to install it for this to work.
Code:
set PATH=C:\Program Files (x86)\PuTTY;%PATH%
plink -ssh [email protected] -pw root reboot
Why not just add a crontab entry? 0 0 * * * reboot
I don't know how.
EDIT: OK did a little crash course on google. Will this reboot every 6 hours?
0 0 * * * reboot
0 6 * * * reboot
0 12 * * * reboot
0 18 * * * reboot
In case anyone wants it I setup a batch file to reboot my miner. This can then be setup as a scheduled task. I am supposed to go on a weeks vacation and I honestly don't trust these things to maintain a hashrate for that long. Sometimes they are good for 24 hours or longer but eventually they always crash to sub 400 hashrate and require a reboot to recover.
If you installed putty to SSH to your miner then you have plink so all you need is the batch file. Just adjust the IP as necessary. If you didn't install putty then you need to install it for this to work.
If you installed putty to SSH to your miner then you have plink so all you need is the batch file. Just adjust the IP as necessary. If you didn't install putty then you need to install it for this to work.
Code:
set PATH=C:\Program Files (x86)\PuTTY;%PATH%
plink -ssh [email protected] -pw root reboot
Why not just add a crontab entry? 0 0 * * * reboot
In case anyone wants it I setup a batch file to reboot my miner. This can then be setup as a scheduled task. I am supposed to go on a weeks vacation and I honestly don't trust these things to maintain a hashrate for that long. Sometimes they are good for 24 hours or longer but eventually they always crash to sub 400 hashrate and require a reboot to recover.
If you installed putty to SSH to your miner then you have plink so all you need is the batch file. Just adjust the IP as necessary. If you didn't install putty then you need to install it for this to work.
If you installed putty to SSH to your miner then you have plink so all you need is the batch file. Just adjust the IP as necessary. If you didn't install putty then you need to install it for this to work.
Code:
set PATH=C:\Program Files (x86)\PuTTY;%PATH%
plink -ssh [email protected] -pw root reboot
Any news about upgrade S2 ?
anyone used DHL for shipping method ? are they good ?
I use DHL exclusively because they're the best in my part of the world (Australia). Bear in mind people have different experience with different delivery companies depending on where they are.I'm in Phoenix and always get my stuff from Bitmain in 2 days via UPS. Never have had a problem with big or small orders. They all go through Alaska, which is on my side of the country. That probably helps.
@Biodom
It is when you go in to your my choice account and go to Change Delivery. You can have them Hold for pickup. So for me who ever did it new they were only 4 Antminers at the local warehouse even before I did.
@ibminer
Good find thanks, no I am in Jacksonville FL
It is when you go in to your my choice account and go to Change Delivery. You can have them Hold for pickup. So for me who ever did it new they were only 4 Antminers at the local warehouse even before I did.
@ibminer
Good find thanks, no I am in Jacksonville FL
anyone used DHL for shipping method ? are they good ?
They have to be better than UPS, out of my B3 order 1 was lost and 4 were stolen by one of the UPS guys with the last name of Wilkerson he had a hold put on the account and had it moved to will call and pick them up.
So anyone using UPS keep an eye out for a hold being put on your account.
Are you in Georgia?
https://www.linkedin.com/pub/dale-wilkerson/52/864/95b
anyone used DHL for shipping method ? are they good ?
I use DHL exclusively because they're the best in my part of the world (Australia). Bear in mind people have different experience with different delivery companies depending on where they are.I also use DHL on my country and always send the packages to their warehouse to avoid delivery issues at the last mile. Piking up the stuff works better for me, all the time.
anyone used DHL for shipping method ? are they good ?
I use DHL exclusively because they're the best in my part of the world (Australia). Bear in mind people have different experience with different delivery companies depending on where they are. anyone used DHL for shipping method ? are they good ?
They have to be better than UPS, out of my B3 order 1 was lost and 4 were stolen by one of the UPS guys with the last name of Wilkerson he had a hold put on the account and had it moved to will call and pick them up.
So anyone using UPS keep an eye out for a hold being put on your account.
hold on account? what is that?
Jump to: