Shipped 
.
Congrats, Im just waiting until they open up for sale again .
I missed the 1st batch since I didnt see about the P2Pool answered, but they got it to work 
They did? I thought they were still working on this.. Link?
Topic: ANTMINER S3+ Discussion and Support Thread - page 474. (Read 710164 times)
I missed the 1st batch since I didnt see about the P2Pool answered, but they got it to work They did? I thought they were still working on this.. Link?
Shipped .
Congrats, Im just waiting until they open up for sale again . I missed the 1st batch since I didnt see about the P2Pool answered, but they got it to work 
Shipped .
. Tracking number received for my Batch 1 order.
I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
Damn, my batch 1 order still has not shipped. Order was paid on 2014-06-30 18:22:37. Kinda regretting taking the 10% coupon now.
My batch 1 of 4 units has also NOT shipped yet. Order paid on 2014-06-30 18:52:10. Getting a bit anxious.
Same here. But the guys at bitmain are good and honest people, I am okay with the delay.
Tracking number received for my Batch 1 order.
I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
Damn, my batch 1 order still has not shipped. Order was paid on 2014-06-30 18:22:37. Kinda regretting taking the 10% coupon now.
Tracking number received for my Batch 1 order.
I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
That´s a bummer.I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
They better figure out the S4 quickly then, as 0.8W/GH wont last too long in this fast-paced environment.
Tracking number received for my Batch 1 order.
I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
I was able to get confirmation from BitMain via email, that the S3's will be 441GH/s baseline for their entire production run.
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think?
Does anyone have any ideas how I could set up the miners remotely?
Thanks
Does anyone have any ideas how I could set up the miners remotely?
Thanks
If you put two NIC's in your PC you can preconfigure one to talk to the miner (with crossover cable) and leave the other one to connect to your network. Then all she has to do initially is power the miner and plug it into the crossover cable. You can then remote in and configure it. If you set the IP as the last bit of configuration, she can then just change the ethernet cable to put it on your main network.
Unfortunately I don't have another network card
Does your computer have wifi and a hardwired NIC you can do the same thing suggested here?
Nar I use one of my GPU rigs for a computer and that is wired directly into the router (well through a switch first)
I have set the missus up with printed screenshots etc of what she needs to do. Find out Monday how we go
Isn't it: What's mine is hers and what's hers ain't mine?
Miners are in flight to USA on
http://flightaware.com/live/flight/UPS77
7:30 hours till they land in Alaska...
http://flightaware.com/live/flight/UPS77
7:30 hours till they land in Alaska...
Too bad it looks like not all of batch 1 has shipped yet. My miners are likely not on that plane
It is now 10pm in China and they seem to have not shipped the second round of B1.
Miners are in flight to USA on
http://flightaware.com/live/flight/UPS77
7:30 hours till they land in Alaska...
http://flightaware.com/live/flight/UPS77
7:30 hours till they land in Alaska...
Refund still indicates "Init". I would think we would receive the funds before this status changes. No reason to speculate as I am sure this will get resolved when the curent situation subsides.
Got my tracking #. Thu delivery (East Coast).
Nothing on the refund yet. Did anyone get that requested the refund get theirs?
Nothing on the refund yet. Did anyone get that requested the refund get theirs?
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think?
Does anyone have any ideas how I could set up the miners remotely?
Thanks
Does anyone have any ideas how I could set up the miners remotely?
Thanks
If you put two NIC's in your PC you can preconfigure one to talk to the miner (with crossover cable) and leave the other one to connect to your network. Then all she has to do initially is power the miner and plug it into the crossover cable. You can then remote in and configure it. If you set the IP as the last bit of configuration, she can then just change the ethernet cable to put it on your main network.
Unfortunately I don't have another network card
Does your computer have wifi and a hardwired NIC you can do the same thing suggested here?
Nar I use one of my GPU rigs for a computer and that is wired directly into the router (well through a switch first)
I have set the missus up with printed screenshots etc of what she needs to do. Find out Monday how we go
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think?
Does anyone have any ideas how I could set up the miners remotely?
Thanks
Does anyone have any ideas how I could set up the miners remotely?
Thanks
If you put two NIC's in your PC you can preconfigure one to talk to the miner (with crossover cable) and leave the other one to connect to your network. Then all she has to do initially is power the miner and plug it into the crossover cable. You can then remote in and configure it. If you set the IP as the last bit of configuration, she can then just change the ethernet cable to put it on your main network.
Unfortunately I don't have another network card
Does your computer have wifi and a hardwired NIC you can do the same thing suggested here?
Nar I use one of my GPU rigs for a computer and that is wired directly into the router (well through a switch first)
I have set the missus up with printed screenshots etc of what she needs to do. Find out Monday how we go
So I need some help here peoples. I do fly in fly out work with a 3 week on roster. So im going to be away from home when the miners arrive. My girl is home but is absolutely computer illiterate. I have setup the power supply ready for when they arrive with labelling for which cables go where so she can just plug them in. But as far as setting it up goes would i be able to setup the miners remotely with teamviewer with another computer set up at home? Reading about the S1 seems the internet has to be disconnected and then connect the compter directly to the miner. Is this true with the s3 do you think?
Does anyone have any ideas how I could set up the miners remotely?
Thanks
Does anyone have any ideas how I could set up the miners remotely?
Thanks
If you put two NIC's in your PC you can preconfigure one to talk to the miner (with crossover cable) and leave the other one to connect to your network. Then all she has to do initially is power the miner and plug it into the crossover cable. You can then remote in and configure it. If you set the IP as the last bit of configuration, she can then just change the ethernet cable to put it on your main network.
Unfortunately I don't have another network card
Does your computer have wifi and a hardwired NIC you can do the same thing suggested here?
Nar I use one of my GPU rigs for a computer and that is wired directly into the router (well through a switch first)
I have set the missus up with printed screenshots etc of what she needs to do. Find out Monday how we go
On different occasions I have
1) Paid the delivery man with a credit/debit card, cash not allowed
2) Missed first delivery attempt, paid with credit/debit card on internet, item delivered next day
3) Gone to depot, paid with cash, picked up item
This is in UK, YMMV
1) Paid the delivery man with a credit/debit card, cash not allowed
2) Missed first delivery attempt, paid with credit/debit card on internet, item delivered next day
3) Gone to depot, paid with cash, picked up item
This is in UK, YMMV
Oh, didnt know i could pay them with credit card, great, thx!! just hope i dont have to
Does anyone have any idea or has BitMain released any official information on the opening date of sales for the next batch? Thanks in advance!
I think the answer is wait?
Does anyone have any idea or has BitMain released any official information on the opening date of sales for the next batch? Thanks in advance!
they're probably focusing on shipping these 3batches
also they got some works to do with the p2pool in their miners
if you want to purchase any S3, maybe you should search in amazon or some resellers
they accept Paypal too...
Jump to: