ANTMINER S5: 1155GH(+OverClock Potential), In Stock $0.319/GH & 0.51W/GH - page 197.

alh

legendary

Activity: 1846

Merit: 1052

Quote from: alh on January 26, 2015, 03:40:32 PM

For what it's worth, ZoomHash is still at $325 + shipping. They accept PayPal and Credit Cards. They claim 5 days shipping in the USA.

Alas this is not be. I got an E-mail from Zoom Hash less than 48 hours later saying that they had to cancel the order. So my "S5 for $348 shipped to Minnesota, paid with Discover" turned into a flop. They are crediting the money back. Bummer....... Undecided

dog1965

sr. member

Activity: 392

Merit: 250

like a said just do this mod you can make the shroud out of a old 120mm fan or just buy one make sure its 25mm or thicker it brings down the noise a hell of a lot!!!!!

as you can see I got a very bad dust problem to!

dog1965

sr. member

Activity: 392

Merit: 250

that's dum then it will not know the real temperature of the hash board and you will burn it up. your s5 will look like this lol lol

Quote from: Tupsu on January 28, 2015, 08:14:18 PM

Quote from: suchmoon on January 28, 2015, 08:05:43 PM

Quote from: goxed on January 28, 2015, 06:04:07 PM

I have marked the LM75 (TEMPERATURE Sensor) Chip in the following pic. Just stick a small heatsink on top of the sensors, one on each hashing board.

If you put a heatsink on the the sensor wouldn't that make the sensor inaccurate then? I mean you're cooling the sensor but not necessarily the board.

That's the whole idea. By reducing of the temperature sensor readings, You can lower the fan speed.

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

Quote from: ?? on ??

It may waste a little power but you can always just use a normal fan limiter that comes with most desktop case fans; you simply need to modify them to attach to a pwm, which is easy. You can even daisy chain them to limit to the exact speed you want. They should waste ~ 3 watts each. Seems the much easier option. I used them to make an S2 tolerable in my apartment.

I have a ton of these; if anyone wants some just pm me and I will send you some.

they have a little resister in them and are pretty nice.

I am very happy using this http://www.amazon.com/gp/product/B00OT58TL4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I suspect it sold out due to my thread on fan mods. What I like is I am able to do 6 delta fans if I choose and run 3 s-5's all at freq 393 and decent sound levels. 62db

I found another on ebay. I may set it up on my fan mod thread to demo what these little dc to dc converters can do compared to a fan controller.

If I had a way to dump s-5 heat out of the house I would get some more. I am running just about 12 th in house using 6k watts . house is warm maybe too warm.

Tupsu

legendary

Activity: 1218

Merit: 1003

Quote from: suchmoon on January 28, 2015, 08:05:43 PM

Quote from: goxed on January 28, 2015, 06:04:07 PM

I have marked the LM75 (TEMPERATURE Sensor) Chip in the following pic. Just stick a small heatsink on top of the sensors, one on each hashing board.

If you put a heatsink on the the sensor wouldn't that make the sensor inaccurate then? I mean you're cooling the sensor but not necessarily the board.

That's the whole idea. By reducing of the temperature sensor readings, You can lower the fan speed.

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org

Quote from: goxed on January 28, 2015, 06:04:07 PM

I have marked the LM75 (TEMPERATURE Sensor) Chip in the following pic. Just stick a small heatsink on top of the sensors, one on each hashing board.

If you put a heatsink on the the sensor wouldn't that make the sensor inaccurate then? I mean you're cooling the sensor but not necessarily the board.

HolgerDansk

member

Activity: 68

Merit: 10

Quote from: sjc1490 on January 28, 2015, 11:13:15 AM

Anybody here off hand know the address of bitmain Tech in china? Trying to get a FCC form filled out for Fedx delivery.

Never Mind, found it where they were advertising for a Embedded Software Engineer

FYI - Federal Express Shipping Option

I order a S5 back on the 25th and chose FedX for the shipper to the US. It has been tied up twice in customs, once in china which a phone call took care of and once here which required a FCC form to be filled out. They knew it was a BTC miner and were insistent that this had to be completed for release. Luckily I had a helpful agent that assisted me in filling out the form which should have been completed by Bitmain according to Fedx. Be careful in choosing them for a shipping option to the US it isn't worth the 10 dollars or so you will save.

I ordered Thursday. FedEx did call and were happy after we were done. Received my S5's today.

Gotta says the fans are annoying, but not as bad as I anticipated. The S5 fans are a little louder than the S2 fans. But definitely the higher pitch will drive you nuts. Glad I took everyone's advice and also ordered some Delta fans.

goxed

legendary

Activity: 1946

Merit: 1006

Bitcoin / Crypto mining Hardware.

Quote from: ZiG on January 28, 2015, 12:39:36 PM

Quote from: philipma1957 on January 28, 2015, 12:15:08 PM

Quote from: mavericklm on January 28, 2015, 09:42:25 AM

https://i.imgur.com/4W5ONMA.jpg
https://i.imgur.com/8wczV3t.jpg

thanks i assume it is the gold/copper color chip in the center of this photo

No Phill...It is the BLACK chip in the middle of the board ...marked "LM75" ...OK... Huh

Hope this helps...

Cheers,

ZiG

I have marked the LM75 (TEMPERATURE Sensor) Chip in the following pic. Just stick a small heatsink on top of the sensors, one on each hashing board.

Link to heatsink on ebay.
http://www.ebay.com/itm/8pcs-Aluminum-Heatsink-With-3M-Tape-For-Computer-VGA-Xbox360-DDR-RAM-IC-Cooler/321275002402?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D28901%26meid%3D0bae1b1c5ed540069fdf169527fadb30%26pid%3D100011%26rk%3D1%26rkt%3D10%26sd%3D321649159708

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

Quote from: MrTeal on January 28, 2015, 12:33:25 PM

Quote from: philipma1957 on January 28, 2015, 12:15:08 PM

Quote from: mavericklm on January 28, 2015, 09:42:25 AM

https://i.imgur.com/4W5ONMA.jpg
https://i.imgur.com/8wczV3t.jpg

~~thanks i assume it is the gold/copper color chip in the center of this photo~~

No, that's a crystal. It's the 8 pin black one at 2 o'clock from it.

thanks I Had trouble deciding if was the black one or the other gold/copper one. was thinking about other fan mods.

right now I am running 2 delta fans in push pull great for overclocking. using the dc to dc converter which runs a constant 9.96 volts to the deltas.

these are good numbers if I had a place to set them up I would do more. Sound is okay 62db with the s-5 and the sp20 sound by side
I have the spare bedroom window open 1 inch and temps are good.

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

Sell momentum gaining at $220. Headed downwards, currently at $241.

Will Bitmain adjust pricing of the S5 within 48 hours to correct ?

Stay tuned, true miners !

ZiG

sr. member

Activity: 406

Merit: 250

Quote from: philipma1957 on January 28, 2015, 12:15:08 PM

Quote from: mavericklm on January 28, 2015, 09:42:25 AM

https://i.imgur.com/4W5ONMA.jpg
https://i.imgur.com/8wczV3t.jpg

thanks i assume it is the gold/copper color chip in the center of this photo

No Phill...It is the BLACK chip in the middle of the board ...marked "LM75" ...OK... Huh

Hope this helps...

Cheers,

ZiG

MrTeal

legendary

Activity: 1274

Merit: 1004

Quote from: philipma1957 on January 28, 2015, 12:15:08 PM

Quote from: mavericklm on January 28, 2015, 09:42:25 AM

https://i.imgur.com/4W5ONMA.jpg
https://i.imgur.com/8wczV3t.jpg

thanks i assume it is the gold/copper color chip in the center of this photo

No, that's a crystal. It's the 8 pin black one at 2 o'clock from it.

philipma1957

legendary

Activity: 4326

Merit: 8899

'The right to privacy matters'

Quote from: mavericklm on January 28, 2015, 09:42:25 AM

https://i.imgur.com/4W5ONMA.jpg
https://i.imgur.com/8wczV3t.jpg

thanks i assume it is the gold/copper color chip in the center of this photo

sjc1490

hero member

Activity: 546

Merit: 500

Quote from: toptekk on January 28, 2015, 11:48:46 AM

Quote from: sjc1490 on January 28, 2015, 11:13:15 AM

Anybody here off hand know the address of bitmain Tech in china? Trying to get a FCC form filled out for Fedx delivery.

Never Mind, found it where they were advertising for a Embedded Software Engineer

FYI - Federal Express Shipping Option

I order a S5 back on the 25th and chose FedX for the shipper to the US. It has been tied up twice in customs, once in china which a phone call took care of and once here which required a FCC form to be filled out. They knew it was a BTC miner and were insistent that this had to be completed for release. Luckily I had a helpful agent that assisted me in filling out the form which should have been completed by Bitmain according to Fedx. Be careful in choosing them for a shipping option to the US it isn't worth the 10 dollars or so you will save.

ordered one Sunday and used FedEx it came to day i had more issue with ups and customs, zero issue with fedex .don't care much for DHL they were better before when they were something express but that's a good many years back they were all i ever use till they merged.

Crazy thing I always have used UPS before and never had a problem chose FedX this time as it was cheaper and had all the above problems. Guess it is luck of the draw and the Customs agent you get.

toptekk

member

Activity: 112

Merit: 10

Quote from: sjc1490 on January 28, 2015, 11:13:15 AM

Anybody here off hand know the address of bitmain Tech in china? Trying to get a FCC form filled out for Fedx delivery.

Never Mind, found it where they were advertising for a Embedded Software Engineer

FYI - Federal Express Shipping Option

I order a S5 back on the 25th and chose FedX for the shipper to the US. It has been tied up twice in customs, once in china which a phone call took care of and once here which required a FCC form to be filled out. They knew it was a BTC miner and were insistent that this had to be completed for release. Luckily I had a helpful agent that assisted me in filling out the form which should have been completed by Bitmain according to Fedx. Be careful in choosing them for a shipping option to the US it isn't worth the 10 dollars or so you will save.

ordered one Sunday and used FedEx it came to day i had more issue with ups and customs, zero issue with fedex .don't care much for DHL they were better before when they were something express but that's a good many years back they were all i ever use till they merged.

Xian01

legendary

Activity: 1652

Merit: 1067

Christian Antkow

Quote from: sjc1490 on January 28, 2015, 11:13:15 AM

Anybody here off hand know the address of bitmain Tech in china? Trying to get a FCC form filled out for Fedx delivery.
Never Mind, found it where they were advertising for a Embedded Software Engineer

FYI - Federal Express Shipping Option
I order a S5 back on the 25th and chose FedX for the shipper to the US. It has been tied up twice in customs, once in china which a phone call took care of and once here which required a FCC form to be filled out. They knew it was a BTC miner and were insistent that this had to be completed for release. Luckily I had a helpful agent that assisted me in filling out the form which should have been completed by Bitmain according to Fedx. Be careful in choosing them for a shipping option to the US it isn't worth the 10 dollars or so you will save.

In my experience, DHL is the most reliable method of getting items from China to the USA.

sjc1490

hero member

Activity: 546

Merit: 500

Anybody here off hand know the address of bitmain Tech in china? Trying to get a FCC form filled out for Fedx delivery.

Never Mind, found it where they were advertising for a Embedded Software Engineer

FYI - Federal Express Shipping Option

I order a S5 back on the 25th and chose FedX for the shipper to the US. It has been tied up twice in customs, once in china which a phone call took care of and once here which required a FCC form to be filled out. They knew it was a BTC miner and were insistent that this had to be completed for release. Luckily I had a helpful agent that assisted me in filling out the form which should have been completed by Bitmain according to Fedx. Be careful in choosing them for a shipping option to the US it isn't worth the 10 dollars or so you will save.

dogie

legendary

Activity: 1666

Merit: 1185