¤¤¤¤ antrun.de - Antrouter R1 Fun-Run - compare your share ¤¤¤¤ - page 21.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: jacobmayes94 on May 08, 2016, 07:07:26 PM

My best share is 194k atm, happened seconds after plugging in remained unchained, and every single share submitted has an equal chance, be it from a CPU, GPU, or ASIC of any size.

Still havnt been added Sad

What is your R1 name in the table?

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Real-Duke on May 08, 2016, 09:12:35 AM

Quote from: Mikestang on May 08, 2016, 07:32:51 AM

Quote from: Mikestang on May 07, 2016, 12:18:05 AM

Woo, I'm #1! If only for a little bit. Tongue

511k won't last too long at the top.

Still at the top, now with 11M share, who's gonna take me down this round? Tongue

Wait a little Moment Mate Im going to fire on the Afterburner 😎

Putting on special fuel on pitstop..... don't look back!

jacobmayes94

sr. member

Activity: 364

Merit: 250

My best share is 194k atm, happened seconds after plugging in remained unchained, and every single share submitted has an equal chance, be it from a CPU, GPU, or ASIC of any size.

Still havnt been added Sad

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Block by dilmurod with 907.10GHs at kano.is pool !

Amazing - looks like a energetic R1 may have a chance!

Real-Duke

legendary

Activity: 3486

Merit: 2287

Top Crypto Casino

Quote from: Mikestang on May 08, 2016, 07:32:51 AM

Quote from: Mikestang on May 07, 2016, 12:18:05 AM

Woo, I'm #1! If only for a little bit. Tongue

511k won't last too long at the top.

Still at the top, now with 11M share, who's gonna take me down this round? Tongue

Wait a little Moment Mate Im going to fire on the Afterburner 😎

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: Mikestang on May 07, 2016, 12:18:05 AM

Woo, I'm #1! If only for a little bit. Tongue

511k won't last too long at the top.

Still at the top, now with 11M share, who's gonna take me down this round? Tongue

minibit

sr. member

Activity: 280

Merit: 250

Quote from: tagat on May 07, 2016, 04:10:12 PM

Quote from: citronick on April 17, 2016, 03:52:49 AM

My first pool is the one that i have registered for the race.

As for the other pools, I created multiple BTC addresses to point to ckpool (who knows one day ck will announce an R1 as winner amazing block finder Grin

)

Then, chose "Balance" to the failover strategy so that R1 will cycle through all the mined addresses in a "balance" manner.

Maybe I didn't keep my R1 running long enough (always fine tuning the small guy every day).... any members who have successfully cycled to multiple pools?

Thanks!

а как настроить Antrouter R1 на solo.ckpool.org:3333) Я просто в этом деле новичок. Если не трудно можно подробней(от и до) напишите плиз Huh

See this image: http://imgur.com/eiduCyz

As pool worker use your BTC address and a worker extension.

Example:

Pool:	stratum+tcp://de.ckpool.org:3333
Worker:	INSERTYOURBTCADDRESSHERE_R1
Password:	x

tagat

newbie

Activity: 46

Merit: 0

Quote from: citronick on April 17, 2016, 03:52:49 AM

My first pool is the one that i have registered for the race.

As for the other pools, I created multiple BTC addresses to point to ckpool (who knows one day ck will announce an R1 as winner amazing block finder Grin

)

Then, chose "Balance" to the failover strategy so that R1 will cycle through all the mined addresses in a "balance" manner.

Maybe I didn't keep my R1 running long enough (always fine tuning the small guy every day).... any members who have successfully cycled to multiple pools?

Thanks!

а как настроить Antrouter R1 на solo.ckpool.org:3333) Я просто в этом деле новичок. Если не трудно можно подробней(от и до) напишите плиз Huh

tagat

newbie

Activity: 46

Merit: 0

Quote from: willi9974 on March 25, 2016, 06:59:51 AM

Hello,

my first AntRouter is setting up and running.

http://solo.ckpool.org/workers/16A1Uv77mS3v1iGReQgSHfEbdiTNFhm6b5_Ant1

Code:

 

{"hashrate1m": "8.1G", "hashrate5m": "7.5G", "hashrate1hr": "2.28G", "hashrate1d": "99.2M", "hashrate7d": "14.2M", "lastupdate": 1458907068, "shares": 2000, "bestshare": 2417.3701850000002, "bestever": 2417}

а как настроить?

minibit

sr. member

Activity: 280

Merit: 250

Quote from: jacobmayes94 on May 06, 2016, 05:45:59 PM

What was the total hashrate?

btw I can be added to the run now! solo.ckpool.org/users/1KumpjxTB6scqwaZCXEwNx3jqEkRQh44dL

Country is UK

Hi jacobmayes94

Cool! Ammi will soon add you to antrun.de.
Have a nice race Cool

Mikestang

legendary

Activity: 1274

Merit: 1000

Woo, I'm #1! If only for a little bit. Tongue

511k won't last too long at the top.

RichBC

hero member

Activity: 588

Merit: 500

Quote from: jacobmayes94 on May 06, 2016, 05:45:59 PM

What was the total hashrate?

btw I can be added to the run now! solo.ckpool.org/users/1KumpjxTB6scqwaZCXEwNx3jqEkRQh44dL

Country is UK

At 425MHz Hash Rate was 1.4TH and at 500MHz it would be 1.65TH

Rich

jacobmayes94

sr. member

Activity: 364

Merit: 250

What was the total hashrate?

btw I can be added to the run now! solo.ckpool.org/users/1KumpjxTB6scqwaZCXEwNx3jqEkRQh44dL

Country is UK

RichBC

hero member

Activity: 588

Merit: 500

Quote from: jacobmayes94 on May 06, 2016, 07:15:16 AM

With a good enough electronics knowledge and power supply, you could modify an S5 (with proper cooling, and power supply) to do something similar? Obviously it would use an insane amount of electricity, but is that possible XD especially if you could put it somewhere with free electricity, although the chips probably wouldn't last too long, even with reasonable cooling

Yes it can be done. I have had an S5 up to 425MHz with the standard core voltage of 0.8V which you get with a 12V supply. As you say with the right cooling and a small increase in the 12V supply to 13.5V which would give you a core voltage of 0.9V you could probably push on up to about 500MHz.

Rich

jacobmayes94

sr. member

Activity: 364

Merit: 250

With a good enough electronics knowledge and power supply, you could modify an S5 (with proper cooling, and power supply) to do something similar? Obviously it would use an insane amount of electricity, but is that possible XD especially if you could put it somewhere with free electricity, although the chips probably wouldn't last too long, even with reasonable cooling

andymanone

sr. member

Activity: 432

Merit: 250

Quote from: jacobmayes94 on May 06, 2016, 04:30:59 AM

If these are the same chips as in the S7, think about what the S7 would be capable of if you had free eleccy.

XD

Haha, yeaah Grin

!
But no, the S7 works with the BM1385, but the Antrouter R1 comes with a BM1384
(it´s the same ASIC used in S5 and S5+)

andY

jacobmayes94

sr. member

Activity: 364

Merit: 250

If these are the same chips as in the S7, think about what the S7 would be capable of if you had free eleccy.

XD

andymanone

sr. member

Activity: 432

Merit: 250

Quote from: minibit on May 05, 2016, 05:52:11 PM

Holy cow, this is sick! Shocked

Very cool to see! Thx for sharing.

Quote from: citronick on May 06, 2016, 12:14:52 AM

Wow... this is amazing.... do you work for NASA or something? Shocked

Thanks for the feedback, guys Grin

!
Will upload more infos and pics soon

Haha, and no, I don´t working for NASA Wink

!

Quote from: jacobmayes94 on May 06, 2016, 03:36:36 AM

Those images don't work for me, what hashrate was he getting?

Jacob

@Jakob:
sorry, there seems to be a prob with my pic hoster at the moment Sad

~~Hope, it´s asap available.~~
Pic-Hoster is alive again.

@Hashrate:
here a short peek on my measured values:

Clockrate: 475 MHz
Multi: 0901 (hex)
Vcore: 0.900 V
Hashrate: ~ 28GHs
Power Consumption: max 27,7Watts

andY

jacobmayes94

sr. member

Activity: 364

Merit: 250

Those images don't work for me, what hashrate was he getting?

Jacob

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Topic: ¤¤¤¤ antrun.de - Antrouter R1 Fun-Run - compare your share ¤¤¤¤ - page 21. (Read 97868 times)