Mine seem to crash a lot
Motherboards make a HUGE difference. I only use higher end ones. The little extra is worth all the time and headaches saved.
Powersupply is another big thing.
Topic: Any word on amd vega hash rates? - page 80. (Read 202748 times)
Motherboards make a HUGE difference. I only use higher end ones. The little extra is worth all the time and headaches saved.
Powersupply is another big thing.
Mine seem to crash a lot
Thought would better for stability to deactivate useless PowerStates?!
Thought Overdrive made the reg? Not? What to edit in regedit?
You have to be more clear, I am not following you at the moment. Not touching P1's at all.
If your values are not sticking in OverDriveTool then the PowerPlayTabe has not applied properly. Try applying it again or even start over witth DDU - Drivers - Regedit - restart - overdrivetool.
Thought Overdrive made the reg? Not? What to edit in regedit?
Best to only activate p1 and p7 for cpu and mem p1 and p3?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
You have to be more clear, I am not following you at the moment. Not touching P1's at all.
If your values are not sticking in OverDriveTool then the PowerPlayTabe has not applied properly. Try applying it again or even start over witth DDU - Drivers - Regedit - restart - overdrivetool.
So they say but I have never had any stability issues with my cards - they either crash right away / in a few minutes or not at all.
Are you using the very latest OverDrive mentioned by RednoW a few posts back ? If not then you have to do it manually with a registry file. There is a tutorial for that somewhere in this thread ( page 68 maybe ? )
Im going to check out the new version of OverDrive my self as well tonight. Might be easier.
What cards and what bioses are you using ?
Thought would better for stability to deactivate useless PowerStates?!
Thought Overdrive made the reg? Not? What to edit in regedit?
You have to be more clear, I am not following you at the moment. Not touching P1's at all.
If your values are not sticking in OverDriveTool then the PowerPlayTabe has not applied properly. Try applying it again or even start over witth DDU - Drivers - Regedit - restart - overdrivetool.
Thought Overdrive made the reg? Not? What to edit in regedit?
Best to only activate p1 and p7 for cpu and mem p1 and p3?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
You have to be more clear, I am not following you at the moment. Not touching P1's at all.
If your values are not sticking in OverDriveTool then the PowerPlayTabe has not applied properly. Try applying it again or even start over witth DDU - Drivers - Regedit - restart - overdrivetool.
Best to only activate p1 and p7 for cpu and mem p1 and p3?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
You have to be more clear, I am not following you at the moment. Not touching P1's at all.
If your values are not sticking in OverDriveTool then the PowerPlayTabe has not applied properly. Try applying it again or even start over witth DDU - Drivers - Regedit - restart - overdrivetool.
Best to only activate p1 and p7 for cpu and mem p1 and p3?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
But if i deactivate(strg+click on the state) power states in OverdriveNTool, after press apply there are back. Same @you?
GPUz doesn't see the vdcc adjustage.
@Rampage89 test to deactivate and activate the gpu in Windows devices manager, then start mining. better?
Have anyone been able to successfully mine Monero on vegas with the compute drivers merged into standard drivers (past 17.10.2). I have been trying to figure it out, but was not successful at all. It looks like the compute driver is there, but HBCC toggle has no effect on the performance - cannot get past 1200 with no OC (tried versions 17.10.3 and 17.11.1).
@Tanos get the 64
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Sounds right. Thats about what you should get with that reg file. You can get down to 120w by changing the memory voltage (which actually is not the memory voltage at all down to 800mv). After than change p6 and p7 values down to 800mv and voila
changing the voltage needs to happen in reg powerplay?
p6-p7 in overdrive?
tnx
Yes, exactly right
I have noticed that on some systems the memory voltage will still show 900mv at startup but in that case you can lower that too in Overdrive and it will stick.I dont know of any public Reg files with that mod but you can just use any other one and change memory volt value your self.
http://i66.tinypic.com/20pzc4k.jpg
You want 80, 38, 01 for 800mv.
The card will rarely still use only 800mv but it will go lower than before. if 1400mhz is not stable than 1350 will be on 99% cards.
Edit - there is a noticable gain on powerdraw for me. My 4 card rig went fro 690-730w from the wall to 585-620w.6 card rig is between 770-820w.
Its not a huge win financially but i like the cards cool and quiet
800mV?
How you can go so low. That means the core should be very low frequency.
That is the floor. The card will adjust automatically. Normally it won't go under 850mv and then not all cards are stable at that voltage. For example, for me, minimum stable is 875mV. How you can go so low. That means the core should be very low frequency. There is no gains below that (perhaps 1-2W per card) and it's not stable.
Hi all
maybe can help me with my 6* rx vega 56 rig
Setup is
asus prime z270-p - 4G enabled
8gb DDR4
120gb ssd
1650 watt gold PSU
blockchain drivers instaled
windows 10 latest updates (installed yesturday from microsoft)
For now connected 4 * vega 56 cards BUT in device manager i see only 1 vega and intel graphic adapter.
i cannot run more then one card but all others connected properly and running on rig but not apears in device manager.
any ideas how to run 4 cards and more?
thanks in advance for any help.
maybe can help me with my 6* rx vega 56 rig
Setup is
asus prime z270-p - 4G enabled
8gb DDR4
120gb ssd
1650 watt gold PSU
blockchain drivers instaled
windows 10 latest updates (installed yesturday from microsoft)
For now connected 4 * vega 56 cards BUT in device manager i see only 1 vega and intel graphic adapter.
i cannot run more then one card but all others connected properly and running on rig but not apears in device manager.
any ideas how to run 4 cards and more?
thanks in advance for any help.
Same. Anyone have any insight?
Make sure your running the batch file/devcon as an administrator. If that doesn't work, make sure you have the 64 bit version of devcon if you're running 64 bit windows, and the 32 bit version of devcon if you're running 32 bit windows.
Side note for people who might search this in the future:
The Asus Z270-A WILL NOT RUN 7 Vega. At least not without additional hardware. Its impossible to install the drivers, they'll crash every time no matter how you do it. 6 cards is doable, as long as they're placed in every slot EXCEPT PCIeX16_1. If a card is placed in the first x16 slot, then the drivers will crash while installing if you try to use more than 5 cards. Just a heads up for anyone who might be having this problem.
Anyone know what mobo can run 8 VEGAs? I have multiple Asus Z270-As and cant seem to get them to pick up 8 cards and it seems my fear is true. What mobo has success running 8 VEGA cards?
Which reg file you use? Need it 
Latest OverdriveNTool launched with admin privileges contains reg-file editor. It's easy to create your own one.
Which reg file you use? Need it
@Tanos get the 64
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Sounds right. Thats about what you should get with that reg file. You can get down to 120w by changing the memory voltage (which actually is not the memory voltage at all down to 800mv). After than change p6 and p7 values down to 800mv and voila
800mV?
How you can go so low. That means the core should be very low frequency.
What series gpu have vega?
@Tanos get the 64
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Sounds right. Thats about what you should get with that reg file. You can get down to 120w by changing the memory voltage (which actually is not the memory voltage at all down to 800mv). After than change p6 and p7 values down to 800mv and voila
changing the voltage needs to happen in reg powerplay?
p6-p7 in overdrive?
tnx
@Tanos get the 64
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Sounds right. Thats about what you should get with that reg file. You can get down to 120w by changing the memory voltage (which actually is not the memory voltage at all down to 800mv). After than change p6 and p7 values down to 800mv and voila
@Tanos get the 64
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Guys I have 4x vega 56, I followed the guide on reddit guide however I'm wondering if voltage control not working properly?
wattman showing 905 core // 900mem - i just flashed the video bios and used the 1100MHz HBM @ 905mV reg file modifying it for each gpu in registry.
mine are avging 165w with -30% power - combined hash rate 7099h/s Cast-XMR
getting 180w power at 0% power - 7600h/s Cast-XMR
Should I get a Vega 64 instead of a 56? They are both at the same price.
I might add MSI Z370 PC PRO. It only starts out with 5 slots and dependig from your config you might be left with only 3 working Some cards randomly are not shown etc... No bios update since launch,
Horrible igpu implemenration which randomly works and then just stops. Definitive return. Had to move my çards back on my expensive board but man it's a joy working on it compared to MSI boards...
FFin hate that thing....
Some cards randomly are not shown etc... No bios update since launch,Horrible igpu implemenration which randomly works and then just stops. Definitive return. Had to move my çards back on my expensive board but man it's a joy working on it compared to MSI boards...
FFin hate that thing....
Jump to: