Can I give more useful information about my problem? This has become the routine to get armory started (start wait till ArmoryDB doesn't use any process power any more, close and start again). It doesn't take that long, but is clearly not supposed to be necessary.
Would a PPA be possible?
Topic: Armory 0.96 is out - page 11. (Read 13848 times)
As in build the DB with --db-type=DB_BARE
I am wondering if I should try the 'Factory Reset' option next or wait for the next update where this bug is fixed...
Build with DB_BARE.
I don't compile myself but download the binaries.
I am wondering if I should try the 'Factory Reset' option next or wait for the next update where this bug is fixed...
Build with DB_BARE.
Quote
Would a PPA be possible?
Don't know what that means.
Windows 7 64bit
Bitcoin Core 0.14.0
Armory 0.96
I upgraded to 0.96 from 0.94.1 and after several crashes (usually at the scanning transaction history stage), restarts and reboots I finally got Armory to startup normally and show transactions and balances.
Everything seemed to be fine after several days, until I did a normal transaction yesterday. I sent some bitcoin from an offline wallet using the method of a usb key to move the tx file back and forth. The transaction went through okay. It got confirmed quickly as evidenced but the receiving wallet and blockchain.info. But Armory didn't show the transaction as having any confirmations(when it really had several), and thus making a lot of the BTC in that wallet unspendable, when it should be spendable.
I decided to do a 'Rescan Balance' to see if that would update the list of txs to show the proper number of confirmations instead of 0. When next I tried to start Armory it stopped working... I tried more times and either ArmoryQt would stop-working/crash or ArmoryDB would, usually at the scanning transaction history stage, or at scanning or resolving tx hashes. After each crash the dblog.txt is always empty and the end of armorylog.txt had several lines of: (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
Next I tried to do a 'Rebuild and Rescan Databases' which didn't help after several attempts(including reboots of the computer)... still the crashes.
I next tried 'Clear All Unconfirmed' in case it was that last tx (which didn't show as confirmed in Armory but really was confirmed) was the problem.
That didn't work right away but after a reboot it seemed to startup normally again. But that transaction was not included in the list of transactions and the balance of the wallet was back to where it was before that transaction; i.e. incorrect.
Of course I am reluctant to do any more transactions from that wallet when Armory can't even display the balance correctly.
Again I tried to do a 'Rescan Balance'... but back to the crashing of ArmoryDB. Even when I try 'Clear All Unconfirmed' and reboot the computer again.
It gets as far as showing in the ArmoryQt client, 'Resolving Tx Hashes'... showing a small percentage but also a small number of seconds to go: e.g. 3% 5 seconds.
Still dblog is empty and armorylog ends with the line: (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode.
The ArmoryDB console, after a Windows pop-up error message "ArmoryDB.exe has stopped working", and before I choose to 'Close the program' shows several lines of incremented error messages...
The last few lines in the ArmoryDB console are:
-ERROR- 1494614491: (..\BlockchainScanner.cpp:1405) Block deser error while processing tx filters:
-ERROR- 1494614491: (..\BlockchainScanner.cpp:1406) raw data does not match expected block hash
-ERROR- 1494614491: (..\BlockchainScanner.cpp:1407) Skipping this block
-ERROR- 1494614492: (..\BlockchainScanner.cpp:1405) Block deser error while processing tx filters:
-ERROR- 1494614492: (..\BlockchainScanner.cpp:1406) raw data does not match expected block hash
-ERROR- 1494614492: (..\BlockchainScanner.cpp:1407) Skipping this block
I am wondering if I should try the 'Factory Reset' option next or wait for the next update where this bug is fixed...
Bitcoin Core 0.14.0
Armory 0.96
I upgraded to 0.96 from 0.94.1 and after several crashes (usually at the scanning transaction history stage), restarts and reboots I finally got Armory to startup normally and show transactions and balances.
Everything seemed to be fine after several days, until I did a normal transaction yesterday. I sent some bitcoin from an offline wallet using the method of a usb key to move the tx file back and forth. The transaction went through okay. It got confirmed quickly as evidenced but the receiving wallet and blockchain.info. But Armory didn't show the transaction as having any confirmations(when it really had several), and thus making a lot of the BTC in that wallet unspendable, when it should be spendable.
I decided to do a 'Rescan Balance' to see if that would update the list of txs to show the proper number of confirmations instead of 0. When next I tried to start Armory it stopped working... I tried more times and either ArmoryQt would stop-working/crash or ArmoryDB would, usually at the scanning transaction history stage, or at scanning or resolving tx hashes. After each crash the dblog.txt is always empty and the end of armorylog.txt had several lines of: (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
Next I tried to do a 'Rebuild and Rescan Databases' which didn't help after several attempts(including reboots of the computer)... still the crashes.
I next tried 'Clear All Unconfirmed' in case it was that last tx (which didn't show as confirmed in Armory but really was confirmed) was the problem.
That didn't work right away but after a reboot it seemed to startup normally again. But that transaction was not included in the list of transactions and the balance of the wallet was back to where it was before that transaction; i.e. incorrect.
Of course I am reluctant to do any more transactions from that wallet when Armory can't even display the balance correctly.
Again I tried to do a 'Rescan Balance'... but back to the crashing of ArmoryDB. Even when I try 'Clear All Unconfirmed' and reboot the computer again.
It gets as far as showing in the ArmoryQt client, 'Resolving Tx Hashes'... showing a small percentage but also a small number of seconds to go: e.g. 3% 5 seconds.
Still dblog is empty and armorylog ends with the line: (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode.
The ArmoryDB console, after a Windows pop-up error message "ArmoryDB.exe has stopped working", and before I choose to 'Close the program' shows several lines of incremented error messages...
The last few lines in the ArmoryDB console are:
-ERROR- 1494614491: (..\BlockchainScanner.cpp:1405) Block deser error while processing tx filters:
-ERROR- 1494614491: (..\BlockchainScanner.cpp:1406) raw data does not match expected block hash
-ERROR- 1494614491: (..\BlockchainScanner.cpp:1407) Skipping this block
-ERROR- 1494614492: (..\BlockchainScanner.cpp:1405) Block deser error while processing tx filters:
-ERROR- 1494614492: (..\BlockchainScanner.cpp:1406) raw data does not match expected block hash
-ERROR- 1494614492: (..\BlockchainScanner.cpp:1407) Skipping this block
I am wondering if I should try the 'Factory Reset' option next or wait for the next update where this bug is fixed...
I got a question... I know that I can close bitcoind with bitcoin-cli stop command. Is there any command or any way to safely stop ArmoryDB?
Now I use pkill -9 ArmoryDB.
Now I use pkill -9 ArmoryDB.
Not really. The client has the code for it but it's not really humanly reproducible. The DB is fine with ungraceful shutdowns, won't phase it.
I didn't "import" with that feature, but copied some old wallets into my armory folder.
So it comes down to wallets with imports crashing Armory on startup?
I got a question... I know that I can close bitcoind with bitcoin-cli stop command. Is there any command or any way to safely stop ArmoryDB?
Now I use pkill -9 ArmoryDB.
I have just been using Ctrl+C (when ArmoryDB is in the terminal) or sudo kill -9 to kill it and I have not experienced any issues. I think that is the only way to actually stop ArmoryDB when you run it yourself. Now I use pkill -9 ArmoryDB.
I got a question... I know that I can close bitcoind with bitcoin-cli stop command. Is there any command or any way to safely stop ArmoryDB?
Now I use pkill -9 ArmoryDB.
Now I use pkill -9 ArmoryDB.
I'm doing this and it works fine for my workstation.
Sometimes armory takes some minutes until it connects to bitcoind. It works fine for me this way ;-)
EDIT1: Wow!! it's not working!!! It's no longer syncing!! It stopped at block #465294.
EDIT2: Doing a rebuild and rescan databases. Tell you later.
Code:
$ ArmoryDB &; sleep 5m; armory
Sometimes armory takes some minutes until it connects to bitcoind. It works fine for me this way ;-)
EDIT1: Wow!! it's not working!!! It's no longer syncing!! It stopped at block #465294.
EDIT2: Doing a rebuild and rescan databases. Tell you later.
I did a rebuild and rescan databases and everything is okay now.
Quote
When using a wallet where I imported a compressed-key address, I get a segfault in ArmoryQT.
The mirror wallets do not support importing compressed pubkeys atm, for I don't remember a feature ever allowing to import pub keys, let alone compressed ones.
Are you sure the issue isn't just with imports in general?
I didn't "import" with that feature, but copied some old wallets into my armory folder.
The compressed address I imported years ago into that wallet was created with vanitygen, afaik. I imported the private key back then into said wallet, not just a pubkey or watch-only address or the like.
I can't tell you much more any more, sorry, as it's been so long ago.
In older Armory versions, I couldn't import compressed keys from other wallets, for example from bitcoinj. What changed with regards to compressed addresses/keys in the new (c?) wallet format? I think I am mixing up different types of compression now..
Ente
So I started Armory and got the expected behaviour as before. After 20 minuts I closed Armory through "File->Close Armory". The ArmoryDB kept runing so I closed that over the systemmonitor.
armorylog.txt
dblog.txt
armorylog.txt
Code:
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1138 - C++ block utilities loaded successfully
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: free -m
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['cat', '/proc/cpuinfo']
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1255 -
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1256 -
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1257 -
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1258 - ************************************************************
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1259 - Invoked: /usr/local/bin/../lib/armory/ArmoryQt.py
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1260 - ************************************************************
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1261 - Loading Armory Engine:
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1262 - Armory Version : 0.96
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1263 - Armory Build: : a3d01aa722
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1264 - PyBtcWallet Version : 1.35
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1265 - Detected Operating system: Linux
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1266 - OS Variant : Ubuntu-16.04-xenial
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1267 - User home-directory : /home/spieler
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1268 - Satoshi BTC directory : /home/spieler/.bitcoin/
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1269 - Armory home dir : /home/spieler/.armory/
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1270 - Detected System Specs :
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1271 - Total Available RAM : 15.63 GB
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1272 - CPU ID string : Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1273 - Number of CPU cores : 4 cores
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1274 - System is 64-bit : True
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1275 - Preferred Encoding : UTF-8
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1276 - Machine Arch : x86_64
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1277 - Available HDD (ARM) : 390 GB
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1278 - Available HDD (BTC) : 390 GB
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1279 -
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1280 - Network Name: Main Network
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1281 - Satoshi Port: 8333
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1282 - Do wlt check: True
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1283 - Named options/arguments to armoryengine.py:
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - thread_count : -1
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - rescan : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - ignoreAllZC : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - rescanBalance : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - disableModules : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - port : None
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - interport : 8223
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - coverageOutputDir: None
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - forceWalletCheck: False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - regtest : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - rebuild : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - nettimeout : 2
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - datadir : DEFAULT
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - clearMempool : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - offline : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - armoryDBDir : DEFAULT
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - armorydb_port : 9001
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - satoshiPort : DEFAULT
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - useTorSettings : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - netlog : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - keypool : 100
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - coverageInclude : None
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - forceOnline : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - redownload : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - rpcBindAddr : 127.0.0.1
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - armorydb_ip : 127.0.0.1
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - multisigFile : DEFAULT
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - ram_usage : -1
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - mtdebug : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - logDisable : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - settingsPath : /home/spieler/.armory/ArmorySettings.txt
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - language : en
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - db_type : DB_FULL
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - doDebug : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - enableDetSign : True
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - disableConfPermis: False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - testnet : False
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - rpcport : DEFAULT
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - satoshiHome : DEFAULT
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - satoshiRpcport : DEFAULT
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - logFile : /home/spieler/.armory/ArmoryQt.py.log.txt
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1285 - verbosity : None
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1286 - Other arguments:
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1289 - ************************************************************
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:1692 - C++ block utilities loaded successfully
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:3590 - Using settings file: /home/spieler/.armory/ArmorySettings.txt
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:3750 - Using Language: de
2017-05-11 13:41 (INFO) -- BDM.py:368 - Using the asynchronous/multi-threaded BlockDataManager.
2017-05-11 13:41 (INFO) -- BDM.py:369 - Blockchain operations will happen in the background.
2017-05-11 13:41 (INFO) -- BDM.py:370 - Devs: check TheBDM.getState() before asking for data.
2017-05-11 13:41 (INFO) -- BDM.py:371 - Registering addresses during rescans will queue them for
2017-05-11 13:41 (INFO) -- BDM.py:372 - inclusion after the current scan is completed.
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:3590 - Using settings file: /home/spieler/.armory/ArmorySettings.txt
2017-05-11 13:41 (INFO) -- ArmoryQt.py:2042 - loadWalletsAndSettings
2017-05-11 13:41 (INFO) -- ArmoryQt.py:2102 - Loading wallets...
2017-05-11 13:41 (INFO) -- ArmoryQt.py:2167 - Number of wallets read in: 2
2017-05-11 13:41 (INFO) -- ArmoryQt.py:2172 - Wallet (BbxgbkBH): "Primary Wallet " (Encrypted)
2017-05-11 13:41 (INFO) -- ArmoryQt.py:2172 - Wallet (bQ6dchyR): "Cold Storage (Watch) " (No Encryption)
2017-05-11 13:41 (INFO) -- ArmoryQt.py:2177 - Loading Multisig Lockboxes
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1747 - acquiring process mutex...
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1385 - setupUriRegistration
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: gconftool-2 --get /desktop/gnome/url-handlers/bitcoin/command
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: xdg-mime query default x-scheme-handler/bitcoin
2017-05-11 13:41 (INFO) -- ArmoryQt.py:558 - Usermode: Expert
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1681 - Changing usermode:
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1682 - From: Expert
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1690 - To: Expert
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1814 - startBitcoindIfNecessary
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['whereis', 'bitcoind']
2017-05-11 13:41 (INFO) -- SDM.py:289 - "whereis" returned: ['/usr/bin/bitcoind']
2017-05-11 13:41 (INFO) -- SDM.py:169 - Found bitcoind in the following places:
2017-05-11 13:41 (INFO) -- SDM.py:171 - /usr/bin/bitcoind
2017-05-11 13:41 (INFO) -- SDM.py:171 - /usr/bin/bitcoind
2017-05-11 13:41 (INFO) -- SDM.py:173 - Using: /usr/bin/bitcoind
2017-05-11 13:41 (INFO) -- SDM.py:337 - Called startBitcoind
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['/usr/bin/bitcoind', '-datadir=/home/spieler/.bitcoin/']
2017-05-11 13:41 (INFO) -- SDM.py:443 - PID of bitcoind: 3084
2017-05-11 13:41 (INFO) -- SDM.py:444 - PID of armory: 2904
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['python', '/usr/local/lib/armory/guardian.py', '2904', '3084']
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-11 13:41 (WARNING) -- SDM.py:396 - Spawning DB with command:ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/home/spieler/.bitcoin/blocks" --datadir="/home/spieler/.armory/" --dbdir="/home/spieler/.armory/databases"
2017-05-11 13:41 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['ArmoryDB', '--db-type="DB_FULL"', '--cookie', '--satoshi-datadir="/home/spieler/.bitcoin/blocks"', '--datadir="/home/spieler/.armory/"', '--dbdir="/home/spieler/.armory/databases"']
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 0
2017-05-11 13:41 (INFO) -- ArmoryQt.py:1882 - loadBlockchainIfNecessary
2017-05-11 13:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 13:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 14:02 (INFO) -- ArmoryQt.py:5400 - BDM is safe for clean shutdown
2017-05-11 14:02 (INFO) -- SDM.py:457 - Called stopBitcoind
2017-05-11 14:02 (INFO) -- ArmoryQt.py:5414 - Attempting to close the main window!
dblog.txt
Code:
Log file opened at 1494502918: /home/spieler/.armory/dbLog.txt
-INFO - 1494502918: (main.cpp:23) Running on 4 threads
-INFO - 1494502918: (main.cpp:24) Ram usage level: 4
-INFO - 1494502918: (BlockUtils.cpp:907) blkfile dir: /home/spieler/.bitcoin/blocks
-INFO - 1494502918: (BlockUtils.cpp:908) lmdb dir: /home/spieler/.armory/databases
-INFO - 1494502918: (lmdb_wrapper.cpp:388) Opening databases...
-INFO - 1494502918: (BlockUtils.cpp:1091) Executing: doInitialSyncOnLoad
-INFO - 1494502918: (DatabaseBuilder.cpp:169) Reading headers from db
-INFO - 1494502986: (DatabaseBuilder.cpp:208) Found 465700 headers in db
-INFO - 1494502987: (DatabaseBuilder.cpp:51) updating HEADERS db
-INFO - 1494502995: (DatabaseBuilder.cpp:477) Found next block after skipping 510159bytes
-INFO - 1494502996: (DatabaseBuilder.cpp:268) parsed block file #864
-DEBUG - 1494502996: (Blockchain.cpp:242) Organizing chain
-INFO - 1494502996: (DatabaseBuilder.cpp:56) updated HEADERS db in 1.81831s
-INFO - 1494502996: (DatabaseBuilder.cpp:106) scanning new blocks from #465696 to #465695
-INFO - 1494502996: (BlockchainScanner.cpp:52) no history to scan
-INFO - 1494502996: (BlockchainScanner.cpp:813) no SSH to scan
-INFO - 1494502996: (DatabaseBuilder.cpp:156) scanned new blocks in 0.001696s
-INFO - 1494502996: (DatabaseBuilder.cpp:160) init db in 7.59904s
-INFO - 1494502996: (BlockUtils.cpp:1206) Enabling zero-conf tracking
-INFO - 1494503070: (BitcoinP2P.cpp:947) Connected to Bitcoin node
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 10 zc parser threads
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 15 zc parser threads
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 20 zc parser threads
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 25 zc parser threads
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 30 zc parser threads
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 35 zc parser threads
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 40 zc parser threads
-WARN - 1494503542: (BDM_supportClasses.cpp:1891) running 45 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 50 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 55 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 60 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 65 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 70 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 75 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 80 zc parser threads
-WARN - 1494503564: (BDM_supportClasses.cpp:1891) running 85 zc parser threads
-WARN - 1494503614: (BDM_supportClasses.cpp:1891) running 90 zc parser threads
-WARN - 1494503614: (BDM_supportClasses.cpp:1891) running 95 zc parser threads
-WARN - 1494503614: (BDM_supportClasses.cpp:1891) running 100 zc parser threads
-WARN - 1494503614: (BDM_supportClasses.cpp:1891) running 105 zc parser threads
-WARN - 1494503616: (BDM_supportClasses.cpp:1891) running 110 zc parser threads
-WARN - 1494503616: (BDM_supportClasses.cpp:1891) running 115 zc parser threads
-WARN - 1494503616: (BDM_supportClasses.cpp:1891) running 120 zc parser threads
-WARN - 1494503616: (BDM_supportClasses.cpp:1891) running 125 zc parser threads
-WARN - 1494503616: (BDM_supportClasses.cpp:1891) running 130 zc parser threads
-WARN - 1494503616: (BDM_supportClasses.cpp:1891) running 135 zc parser threads
-WARN - 1494503616: (BDM_supportClasses.cpp:1891) running 140 zc parser threads
-INFO - 1494504153: (nodeRPC.cpp:368) Bitcoin server stopping
-INFO - 1494504153: (SocketObject.cpp:350) POLLIN recv return 0
-ERROR - 1494504153: (BitcoinP2P.cpp:1037) caught StopBlockingLoop in processDataStackThread
-INFO - 1494504153: (BitcoinP2P.cpp:969) Disconnected from Bitcoin node
Quote
When using a wallet where I imported a compressed-key address, I get a segfault in ArmoryQT.
The mirror wallets do not support importing compressed pubkeys atm, for I don't remember a feature ever allowing to import pub keys, let alone compressed ones.
Are you sure the issue isn't just with imports in general?
Hi everyone,
as my v0.96 with remote ArmoryDB finally works, I imported old wallet files.
When using a wallet where I imported a compressed-key address, I get a segfault in ArmoryQT.
Earier versions worked, showed the address and balance, just couldn't spend the funds.
I have no entries in the logs whatsoever (neither in armoryDB nor armorylog.txt), just bam, segfault and gone.
Anything else I can provide? Want the wallet file to test?
Cheers,
Ente
as my v0.96 with remote ArmoryDB finally works, I imported old wallet files.
When using a wallet where I imported a compressed-key address, I get a segfault in ArmoryQT.
Earier versions worked, showed the address and balance, just couldn't spend the funds.
I have no entries in the logs whatsoever (neither in armoryDB nor armorylog.txt), just bam, segfault and gone.
Anything else I can provide? Want the wallet file to test?
Cheers,
Ente
I'm doing this and it works fine for my workstation.
Sometimes armory takes some minutes until it connects to bitcoind. It works fine for me this way ;-)
EDIT1: Wow!! it's not working!!! It's no longer syncing!! It stopped at block #465294.
EDIT2: Doing a rebuild and rescan databases. Tell you later.
Code:
$ ArmoryDB &; sleep 5m; armory
Sometimes armory takes some minutes until it connects to bitcoind. It works fine for me this way ;-)
EDIT1: Wow!! it's not working!!! It's no longer syncing!! It stopped at block #465294.
EDIT2: Doing a rebuild and rescan databases. Tell you later.
Show me dbLog.txt
Thank you very much for the quick reply and your great work!!! Before I got your reply, I tried something else and used the Option rebuild database and scan new. It finally finished overnight and shows my wallets, great!!! I tried to send some BTC with automatic fee (0.00285), but there are not yet confirmed, neither visible in blockchain.info....
Every time I start Armory it gets stuck on preparing data base without any progress. When I close it, the ArmoryDB process keeps running. If I also close this and restart Armory it starts like expected. This happens everytime Bitcoin Core has to do something it seems, because it only does that after longer pauses like maybe 2 hours. Also if I close Armory it reminds me that it lost the connection to Bitcoin Core wich I guess is to be expected but not usefull to know if I close Armory already.
armorylog.txt
dbLog.txt
Thx for this Amazing Wallet
armorylog.txt
Code:
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1138 - C++ block utilities loaded successfully
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:665 - Executing popen: free -m
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['cat', '/proc/cpuinfo']
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1255 -
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1256 -
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1257 -
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1258 - ************************************************************
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1259 - Invoked: /usr/local/bin/../lib/armory/ArmoryQt.py
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1260 - ************************************************************
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1261 - Loading Armory Engine:
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1262 - Armory Version : 0.96
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1263 - Armory Build: : a3d01aa722
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1264 - PyBtcWallet Version : 1.35
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1265 - Detected Operating system: Linux
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1266 - OS Variant : Ubuntu-16.04-xenial
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1267 - User home-directory : /home/username
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1268 - Satoshi BTC directory : /home/username/.bitcoin/
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1269 - Armory home dir : /home/username/.armory/
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1270 - Detected System Specs :
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1271 - Total Available RAM : 15.63 GB
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1272 - CPU ID string : Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1273 - Number of CPU cores : 4 cores
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1274 - System is 64-bit : True
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1275 - Preferred Encoding : UTF-8
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1276 - Machine Arch : x86_64
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1277 - Available HDD (ARM) : 390 GB
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1278 - Available HDD (BTC) : 390 GB
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1279 -
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1280 - Network Name: Main Network
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1281 - Satoshi Port: 8333
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1282 - Do wlt check: True
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1283 - Named options/arguments to armoryengine.py:
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - thread_count : -1
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - rescan : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - ignoreAllZC : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - rescanBalance : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - disableModules : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - port : None
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - interport : 8223
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - coverageOutputDir: None
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - forceWalletCheck: False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - regtest : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - rebuild : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - nettimeout : 2
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - datadir : DEFAULT
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - clearMempool : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - offline : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - armoryDBDir : DEFAULT
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - armorydb_port : 9001
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - satoshiPort : DEFAULT
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - useTorSettings : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - netlog : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - keypool : 100
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - coverageInclude : None
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - forceOnline : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - redownload : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - rpcBindAddr : 127.0.0.1
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - armorydb_ip : 127.0.0.1
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - multisigFile : DEFAULT
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - ram_usage : -1
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - mtdebug : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - logDisable : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - settingsPath : /home/username/.armory/ArmorySettings.txt
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - language : en
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - db_type : DB_FULL
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - doDebug : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - enableDetSign : True
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - disableConfPermis: False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - testnet : False
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - rpcport : DEFAULT
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - satoshiHome : DEFAULT
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - satoshiRpcport : DEFAULT
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - logFile : /home/username/.armory/ArmoryQt.py.log.txt
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1285 - verbosity : None
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1286 - Other arguments:
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1289 - ************************************************************
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:1692 - C++ block utilities loaded successfully
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:3590 - Using settings file: /home/username/.armory/ArmorySettings.txt
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:3750 - Using Language: de
2017-05-10 23:59 (INFO) -- BDM.py:368 - Using the asynchronous/multi-threaded BlockDataManager.
2017-05-10 23:59 (INFO) -- BDM.py:369 - Blockchain operations will happen in the background.
2017-05-10 23:59 (INFO) -- BDM.py:370 - Devs: check TheBDM.getState() before asking for data.
2017-05-10 23:59 (INFO) -- BDM.py:371 - Registering addresses during rescans will queue them for
2017-05-10 23:59 (INFO) -- BDM.py:372 - inclusion after the current scan is completed.
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:3590 - Using settings file: /home/username/.armory/ArmorySettings.txt
2017-05-10 23:59 (INFO) -- ArmoryQt.py:2042 - loadWalletsAndSettings
2017-05-10 23:59 (INFO) -- ArmoryQt.py:2102 - Loading wallets...
2017-05-10 23:59 (INFO) -- ArmoryQt.py:2167 - Number of wallets read in: 2
2017-05-10 23:59 (INFO) -- ArmoryQt.py:2172 - Wallet (BbxgbkBH): "Primary Wallet " (Encrypted)
2017-05-10 23:59 (INFO) -- ArmoryQt.py:2172 - Wallet (bQ6dchyR): "Cold Storage (Watch) " (No Encryption)
2017-05-10 23:59 (INFO) -- ArmoryQt.py:2177 - Loading Multisig Lockboxes
2017-05-10 23:59 (INFO) -- ArmoryQt.py:1747 - acquiring process mutex...
2017-05-10 23:59 (INFO) -- ArmoryQt.py:1385 - setupUriRegistration
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:665 - Executing popen: gconftool-2 --get /desktop/gnome/url-handlers/bitcoin/command
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:665 - Executing popen: xdg-mime query default x-scheme-handler/bitcoin
2017-05-10 23:59 (INFO) -- ArmoryQt.py:558 - Usermode: Expert
2017-05-10 23:59 (INFO) -- ArmoryQt.py:1681 - Changing usermode:
2017-05-10 23:59 (INFO) -- ArmoryQt.py:1682 - From: Expert
2017-05-10 23:59 (INFO) -- ArmoryQt.py:1690 - To: Expert
2017-05-10 23:59 (INFO) -- ArmoryQt.py:1814 - startBitcoindIfNecessary
2017-05-10 23:59 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-10 23:59 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['whereis', 'bitcoind']
2017-05-10 23:59 (INFO) -- SDM.py:289 - "whereis" returned: ['/usr/bin/bitcoind']
2017-05-10 23:59 (INFO) -- SDM.py:169 - Found bitcoind in the following places:
2017-05-10 23:59 (INFO) -- SDM.py:171 - /usr/bin/bitcoind
2017-05-10 23:59 (INFO) -- SDM.py:171 - /usr/bin/bitcoind
2017-05-10 23:59 (INFO) -- SDM.py:173 - Using: /usr/bin/bitcoind
2017-05-10 23:59 (INFO) -- SDM.py:337 - Called startBitcoind
2017-05-11 00:00 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['/usr/bin/bitcoind', '-datadir=/home/username/.bitcoin/']
2017-05-11 00:00 (INFO) -- SDM.py:443 - PID of bitcoind: 3083
2017-05-11 00:00 (INFO) -- SDM.py:444 - PID of armory: 2970
2017-05-11 00:00 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['python', '/usr/local/lib/armory/guardian.py', '2970', '3083']
2017-05-11 00:00 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-11 00:00 (WARNING) -- SDM.py:396 - Spawning DB with command:ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/home/username/.bitcoin/blocks" --datadir="/home/username/.armory/" --dbdir="/home/username/.armory/databases"
2017-05-11 00:00 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['ArmoryDB', '--db-type="DB_FULL"', '--cookie', '--satoshi-datadir="/home/username/.bitcoin/blocks"', '--datadir="/home/username/.armory/"', '--dbdir="/home/username/.armory/databases"']
2017-05-11 00:00 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-11 00:00 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 0
2017-05-11 00:00 (INFO) -- ArmoryQt.py:1882 - loadBlockchainIfNecessary
2017-05-11 00:00 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:00 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:5400 - BDM is safe for clean shutdown
2017-05-11 00:05 (INFO) -- SDM.py:457 - Called stopBitcoind
2017-05-11 00:05 (INFO) -- ArmoryQt.py:5414 - Attempting to close the main window!
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1138 - C++ block utilities loaded successfully
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: free -m
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['cat', '/proc/cpuinfo']
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1255 -
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1256 -
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1257 -
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1258 - ************************************************************
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1259 - Invoked: /usr/local/bin/../lib/armory/ArmoryQt.py
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1260 - ************************************************************
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1261 - Loading Armory Engine:
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1262 - Armory Version : 0.96
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1263 - Armory Build: : a3d01aa722
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1264 - PyBtcWallet Version : 1.35
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1265 - Detected Operating system: Linux
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1266 - OS Variant : Ubuntu-16.04-xenial
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1267 - User home-directory : /home/username
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1268 - Satoshi BTC directory : /home/username/.bitcoin/
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1269 - Armory home dir : /home/username/.armory/
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1270 - Detected System Specs :
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1271 - Total Available RAM : 15.63 GB
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1272 - CPU ID string : Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1273 - Number of CPU cores : 4 cores
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1274 - System is 64-bit : True
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1275 - Preferred Encoding : UTF-8
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1276 - Machine Arch : x86_64
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1277 - Available HDD (ARM) : 390 GB
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1278 - Available HDD (BTC) : 390 GB
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1279 -
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1280 - Network Name: Main Network
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1281 - Satoshi Port: 8333
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1282 - Do wlt check: True
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1283 - Named options/arguments to armoryengine.py:
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - thread_count : -1
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - rescan : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - ignoreAllZC : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - rescanBalance : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - disableModules : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - port : None
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - interport : 8223
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - coverageOutputDir: None
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - forceWalletCheck: False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - regtest : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - rebuild : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - nettimeout : 2
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - datadir : DEFAULT
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - clearMempool : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - offline : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - armoryDBDir : DEFAULT
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - armorydb_port : 9001
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - satoshiPort : DEFAULT
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - useTorSettings : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - netlog : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - keypool : 100
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - coverageInclude : None
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - forceOnline : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - redownload : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - rpcBindAddr : 127.0.0.1
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - armorydb_ip : 127.0.0.1
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - multisigFile : DEFAULT
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - ram_usage : -1
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - mtdebug : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - logDisable : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - settingsPath : /home/username/.armory/ArmorySettings.txt
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - language : en
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - db_type : DB_FULL
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - doDebug : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - enableDetSign : True
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - disableConfPermis: False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - testnet : False
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - rpcport : DEFAULT
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - satoshiHome : DEFAULT
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - satoshiRpcport : DEFAULT
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - logFile : /home/username/.armory/ArmoryQt.py.log.txt
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1285 - verbosity : None
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1286 - Other arguments:
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1289 - ************************************************************
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:1692 - C++ block utilities loaded successfully
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:3590 - Using settings file: /home/username/.armory/ArmorySettings.txt
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:3750 - Using Language: de
2017-05-11 00:05 (INFO) -- BDM.py:368 - Using the asynchronous/multi-threaded BlockDataManager.
2017-05-11 00:05 (INFO) -- BDM.py:369 - Blockchain operations will happen in the background.
2017-05-11 00:05 (INFO) -- BDM.py:370 - Devs: check TheBDM.getState() before asking for data.
2017-05-11 00:05 (INFO) -- BDM.py:371 - Registering addresses during rescans will queue them for
2017-05-11 00:05 (INFO) -- BDM.py:372 - inclusion after the current scan is completed.
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:3590 - Using settings file: /home/username/.armory/ArmorySettings.txt
2017-05-11 00:05 (INFO) -- ArmoryQt.py:2042 - loadWalletsAndSettings
2017-05-11 00:05 (INFO) -- ArmoryQt.py:2102 - Loading wallets...
2017-05-11 00:05 (INFO) -- ArmoryQt.py:2167 - Number of wallets read in: 2
2017-05-11 00:05 (INFO) -- ArmoryQt.py:2172 - Wallet (BbxgbkBH): "Primary Wallet " (Encrypted)
2017-05-11 00:05 (INFO) -- ArmoryQt.py:2172 - Wallet (bQ6dchyR): "Cold Storage (Watch) " (No Encryption)
2017-05-11 00:05 (INFO) -- ArmoryQt.py:2177 - Loading Multisig Lockboxes
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1747 - acquiring process mutex...
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1385 - setupUriRegistration
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: gconftool-2 --get /desktop/gnome/url-handlers/bitcoin/command
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: xdg-mime query default x-scheme-handler/bitcoin
2017-05-11 00:05 (INFO) -- ArmoryQt.py:558 - Usermode: Expert
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1681 - Changing usermode:
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1682 - From: Expert
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1690 - To: Expert
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1814 - startBitcoindIfNecessary
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['whereis', 'bitcoind']
2017-05-11 00:05 (INFO) -- SDM.py:289 - "whereis" returned: ['/usr/bin/bitcoind']
2017-05-11 00:05 (INFO) -- SDM.py:169 - Found bitcoind in the following places:
2017-05-11 00:05 (INFO) -- SDM.py:171 - /usr/bin/bitcoind
2017-05-11 00:05 (INFO) -- SDM.py:171 - /usr/bin/bitcoind
2017-05-11 00:05 (INFO) -- SDM.py:173 - Using: /usr/bin/bitcoind
2017-05-11 00:05 (INFO) -- SDM.py:337 - Called startBitcoind
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['/usr/bin/bitcoind', '-datadir=/home/username/.bitcoin/']
2017-05-11 00:05 (INFO) -- SDM.py:443 - PID of bitcoind: 3244
2017-05-11 00:05 (INFO) -- SDM.py:444 - PID of armory: 3209
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['python', '/usr/local/lib/armory/guardian.py', '3209', '3244']
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-11 00:05 (WARNING) -- SDM.py:396 - Spawning DB with command:ArmoryDB --db-type="DB_FULL" --cookie --satoshi-datadir="/home/username/.bitcoin/blocks" --datadir="/home/username/.armory/" --dbdir="/home/username/.armory/databases"
2017-05-11 00:05 (INFO) -- ArmoryUtils.py:665 - Executing popen: ['ArmoryDB', '--db-type="DB_FULL"', '--cookie', '--satoshi-datadir="/home/username/.bitcoin/blocks"', '--datadir="/home/username/.armory/"', '--dbdir="/home/username/.armory/databases"']
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1882 - loadBlockchainIfNecessary
2017-05-11 00:05 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-11 00:05 (WARNING) -- ArmoryQt.py:4057 - Called updateSyncProgress while not sync'ing
2017-05-11 00:15 (INFO) -- ArmoryQt.py:5400 - BDM is safe for clean shutdown
2017-05-11 00:15 (INFO) -- SDM.py:457 - Called stopBitcoind
2017-05-11 00:15 (INFO) -- ArmoryQt.py:5414 - Attempting to close the main window!
dbLog.txt
Code:
Log file opened at 1494453622: /home/username/.armory/dbLog.txt
-INFO - 1494453622: (main.cpp:23) Running on 4 threads
-INFO - 1494453622: (main.cpp:24) Ram usage level: 4
-INFO - 1494453622: (BlockUtils.cpp:907) blkfile dir: /home/username/.bitcoin/blocks
-INFO - 1494453622: (BlockUtils.cpp:908) lmdb dir: /home/username/.armory/databases
-INFO - 1494453622: (lmdb_wrapper.cpp:388) Opening databases...
-INFO - 1494453622: (BlockUtils.cpp:1091) Executing: doInitialSyncOnLoad
-INFO - 1494453622: (DatabaseBuilder.cpp:169) Reading headers from db
-INFO - 1494453686: (DatabaseBuilder.cpp:208) Found 465700 headers in db
-INFO - 1494453688: (DatabaseBuilder.cpp:51) updating HEADERS db
-INFO - 1494453695: (DatabaseBuilder.cpp:477) Found next block after skipping 510159bytes
-INFO - 1494453696: (DatabaseBuilder.cpp:268) parsed block file #863
-DEBUG - 1494453696: (Blockchain.cpp:242) Organizing chain
-INFO - 1494453696: (DatabaseBuilder.cpp:56) updated HEADERS db in 1.24096s
-INFO - 1494453696: (DatabaseBuilder.cpp:106) scanning new blocks from #465696 to #465695
-INFO - 1494453696: (BlockchainScanner.cpp:52) no history to scan
-INFO - 1494453696: (BlockchainScanner.cpp:813) no SSH to scan
-INFO - 1494453696: (DatabaseBuilder.cpp:156) scanned new blocks in 0.001556s
-INFO - 1494453696: (DatabaseBuilder.cpp:160) init db in 6.48408s
-INFO - 1494453696: (BlockUtils.cpp:1206) Enabling zero-conf tracking
-INFO - 1494453860: (BitcoinP2P.cpp:947) Connected to Bitcoin node
-INFO - 1494453906: (nodeRPC.cpp:368) Bitcoin server stopping
-INFO - 1494453906: (SocketObject.cpp:350) POLLIN recv return 0
-ERROR - 1494453906: (BitcoinP2P.cpp:1037) caught StopBlockingLoop in processDataStackThread
-INFO - 1494453906: (BitcoinP2P.cpp:969) Disconnected from Bitcoin node
Log file opened at 1494453923: /home/username/.armory/dbLog.txt
-INFO - 1494453923: (main.cpp:23) Running on 4 threads
-INFO - 1494453923: (main.cpp:24) Ram usage level: 4
-INFO - 1494453923: (BlockUtils.cpp:907) blkfile dir: /home/username/.bitcoin/blocks
-INFO - 1494453923: (BlockUtils.cpp:908) lmdb dir: /home/username/.armory/databases
-INFO - 1494453923: (lmdb_wrapper.cpp:388) Opening databases...
-INFO - 1494453923: (BlockUtils.cpp:1091) Executing: doInitialSyncOnLoad
-INFO - 1494453923: (DatabaseBuilder.cpp:169) Reading headers from db
-INFO - 1494453923: (BDM_Server.cpp:996) registered bdv: 6a8a0e0ba0fcc5113411
-INFO - 1494453925: (DatabaseBuilder.cpp:208) Found 465700 headers in db
-INFO - 1494453927: (DatabaseBuilder.cpp:51) updating HEADERS db
-INFO - 1494453927: (DatabaseBuilder.cpp:477) Found next block after skipping 510159bytes
-INFO - 1494453928: (DatabaseBuilder.cpp:268) parsed block file #863
-DEBUG - 1494453928: (Blockchain.cpp:242) Organizing chain
-INFO - 1494453928: (DatabaseBuilder.cpp:56) updated HEADERS db in 1.11939s
-INFO - 1494453928: (DatabaseBuilder.cpp:106) scanning new blocks from #465696 to #465695
-INFO - 1494453928: (BlockchainScanner.cpp:52) no history to scan
-INFO - 1494453928: (BlockchainScanner.cpp:813) no SSH to scan
-INFO - 1494453928: (DatabaseBuilder.cpp:156) scanned new blocks in 0.00176s
-INFO - 1494453928: (DatabaseBuilder.cpp:160) init db in 5.34168s
-INFO - 1494453928: (BlockUtils.cpp:1206) Enabling zero-conf tracking
-INFO - 1494453930: (BitcoinP2P.cpp:947) Connected to Bitcoin node
-WARN - 1494454505: (BDM_supportClasses.cpp:1891) running 10 zc parser threads
-WARN - 1494454505: (BDM_supportClasses.cpp:1891) running 15 zc parser threads
-WARN - 1494454505: (BDM_supportClasses.cpp:1891) running 20 zc parser threads
-WARN - 1494454505: (BDM_supportClasses.cpp:1891) running 25 zc parser threads
-WARN - 1494454505: (BDM_supportClasses.cpp:1891) running 30 zc parser threads
-WARN - 1494454505: (BDM_supportClasses.cpp:1891) running 35 zc parser threads
-INFO - 1494454506: (nodeRPC.cpp:368) Bitcoin server stopping
-ERROR - 1494454511: (SocketObject.cpp:285) POLLERR error in readFromSocketThread
-ERROR - 1494454511: (BitcoinP2P.cpp:1027) caught SocketError exception in processDataStackThread: POLLERR error in readFromSocketThread
-INFO - 1494454511: (BitcoinP2P.cpp:969) Disconnected from Bitcoin node
Thx for this Amazing Wallet
Quote
Every time I start Armory it gets stuck on preparing data base without any progress.
How long does it go like this? Can you let it run for like 20min stuck and post dbLog.txt again?
Every time another application is started, Windows needs to swap the memory to/from the pagefile.
It slows down my system. Even with an SSD.
It slows down my system. Even with an SSD.
mmaped memory does not behave like swap. It's a hint for the OS to not clear cached on disk data that has already been read once, it does not push that data into a pagefile afterwards to free up memory (it's already on disk to begin with). The memory is just given up.
mmap is actually an elegant way to scale with extra RAM without hogging it from other processes.
Quote
armorylog.txt
Just the parts that are of interest, I think.
Just the parts that are of interest, I think.
Translation patch snafu, will get it under control.
Quote
Any chance that import of private keys will be supported too in the future?
That's for the new wallets. This version still uses Python wallets. The new code does not handle private keys yet, it only creates WO copies of the python wallets to deal with the new scripts types.
Quote
Today this happened:
ArmoryQT,exe has stoppen working
ArmoryQT,exe has stoppen working
Think I've got the fix for this already in testing. Would help if you try the testing builds for 0.96.1 once I push that out (this week end most likely)
Armory crashed every time after scanning.
Emptied %appdata%\Armory\databases , causing Armory to rebuild the database solved this problem.
btw: Amazing that this is the only piece of software that manages to fully use my 16 GB RAM while rebuilding the database. No problem for me.
Emptied %appdata%\Armory\databases , causing Armory to rebuild the database solved this problem.
btw: Amazing that this is the only piece of software that manages to fully use my 16 GB RAM while rebuilding the database. No problem for me.
mmaped RAM, not allocated.
Every time another application is started, Windows needs to swap the memory to/from the pagefile.
It slows down my system. Even with an SSD.
Quote
Quote
Problem: Saving/Backing up a wallet unencrypted to a file does not work. "Save to File"
I want to use it to backup the private keys to another encrypted medium. CTRL-C and -V would work, but that is annoying after a while.
I want to use it to backup the private keys to another encrypted medium. CTRL-C and -V would work, but that is annoying after a while.
Need to see armorylog.txt
armorylog.txt
Just the parts that are of interest, I think.
Code:
2017-05-09 23:15 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 1117, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:16 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 1117, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:16 (INFO) -- ArmoryQt.py:4876 - New Block! : 465659
2017-05-09 23:16 (INFO) -- ArmoryQt.py:4884 - Current block number: 465659
2017-05-09 23:18 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 1119, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:18 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 1119, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:18 (ERROR) -- ArmoryUtils.pyc:3223 - Error in pybkgdthread: Incorrect passphrase for wallet
Traceback (most recent call last):
File "armoryengine\ArmoryUtils.pyc", line 3221, in run
File "armoryengine\ArmoryUtils.pyc", line 3158, in funcPartial
File "qtdialogs.pyc", line 12949, in exec_async
PassphraseError: Incorrect passphrase for wallet
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:22 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5092, in reject
File "qtdialogs.pyc", line 5081, in cleanup
AttributeError: 'NoneType' object has no attribute 'binPrivKey32_Plain'
2017-05-09 23:22 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5092, in reject
File "qtdialogs.pyc", line 5081, in cleanup
AttributeError: 'NoneType' object has no attribute 'binPrivKey32_Plain'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
File "ui\WalletFrames.pyc", line 1117, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:16 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 1117, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:16 (INFO) -- ArmoryQt.py:4876 - New Block! : 465659
2017-05-09 23:16 (INFO) -- ArmoryQt.py:4884 - Current block number: 465659
2017-05-09 23:18 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 1119, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:18 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 1119, in clickedDoIt
File "ArmoryQt.py", line 1614, in makeWalletCopy
File "armoryengine\Decorators.pyc", line 48, in inner
File "ArmoryQt.py", line 2224, in getFileSave
TypeError: sequence item 0: expected string, QString found
2017-05-09 23:18 (ERROR) -- ArmoryUtils.pyc:3223 - Error in pybkgdthread: Incorrect passphrase for wallet
Traceback (most recent call last):
File "armoryengine\ArmoryUtils.pyc", line 3221, in run
File "armoryengine\ArmoryUtils.pyc", line 3158, in funcPartial
File "qtdialogs.pyc", line 12949, in exec_async
PassphraseError: Incorrect passphrase for wallet
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:19 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5065, in saveToFile
ValueError: unsupported format character '_' (0x5f) at index 10
2017-05-09 23:22 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5092, in reject
File "qtdialogs.pyc", line 5081, in cleanup
AttributeError: 'NoneType' object has no attribute 'binPrivKey32_Plain'
2017-05-09 23:22 (ERROR) -- Traceback (most recent call last):
File "qtdialogs.pyc", line 5092, in reject
File "qtdialogs.pyc", line 5081, in cleanup
AttributeError: 'NoneType' object has no attribute 'binPrivKey32_Plain'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:25 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
2017-05-09 23:26 (ERROR) -- Traceback (most recent call last):
File "ui\WalletFrames.pyc", line 593, in cardClicked
TypeError: unsupported operand type(s) for %: 'QString' and 'int'
Quote
Quote
Compressed keys:
MultiBit Classis private keys are not accepted at Private Key Import: No valid private key data was entered.
https://bitcointalksearch.org/topic/m.14100768
MultiBit Classis private keys are not accepted at Private Key Import: No valid private key data was entered.
https://bitcointalksearch.org/topic/m.14100768
Compressed public keys, never said anything about compressed private keys
Any chance that import of private keys will be supported too in the future?
Today this happened:
ArmoryQT,exe has stoppen working
dblog.txt:
Code:
Log file opened at 1494434109: C:\Users\jeff\AppData\Roaming\Armory\dbLog.txt
-INFO - 1494434109: (..\main.cpp:23) Running on 4 threads
-INFO - 1494434109: (..\main.cpp:24) Ram usage level: 4
-INFO - 1494434109: (..\BlockUtils.cpp:907) blkfile dir: C:\Users\jeff\AppData\Roaming\Bitcoin\blocks
-INFO - 1494434109: (..\BlockUtils.cpp:908) lmdb dir: C:\Users\jeff\AppData\Roaming\Armory\databases
-INFO - 1494434109: (..\lmdb_wrapper.cpp:388) Opening databases...
-INFO - 1494434111: (..\BitcoinP2P.cpp:947) Connected to Bitcoin node
-INFO - 1494434111: (..\BDM_Server.cpp:996) registered bdv: eb0a1e06064ffaddef7b
-INFO - 1494434113: (..\BlockUtils.cpp:1091) Executing: doInitialSyncOnLoad
-INFO - 1494434113: (..\DatabaseBuilder.cpp:169) Reading headers from db
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 0 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 5 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 10 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 15 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 20 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 25 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 30 zc parser threads
-INFO - 1494434120: (..\DatabaseBuilder.cpp:208) Found 465669 headers in db
-INFO - 1494434123: (..\DatabaseBuilder.cpp:51) updating HEADERS db
-INFO - 1494434123: (..\DatabaseBuilder.cpp:477) Found next block after skipping 508317bytes
-INFO - 1494434124: (..\DatabaseBuilder.cpp:268) parsed block file #862
-INFO - 1494434125: (..\DatabaseBuilder.cpp:268) parsed block file #863
-DEBUG - 1494434125: (..\Blockchain.cpp:242) Organizing chain
-INFO - 1494434125: (..\DatabaseBuilder.cpp:56) updated HEADERS db in 2.139s
-INFO - 1494434125: (..\DatabaseBuilder.cpp:106) scanning new blocks from #465668 to #465771
-INFO - 1494434125: (..\BlockchainScanner.cpp:650) scanned from height #465668 to #465771
-INFO - 1494434125: (..\BlockchainScanner.cpp:225) scanned transaction history in 0.382s
-INFO - 1494434125: (..\DatabaseBuilder.cpp:156) scanned new blocks in 0.419s
-INFO - 1494434125: (..\DatabaseBuilder.cpp:160) init db in 12.574s
-INFO - 1494434125: (..\BlockUtils.cpp:1206) Enabling zero-conf tracking
-INFO - 1494434245: (..\BDM_Server.cpp:1025) unregistered bdv: eb0a1e06064ffaddef7b
-INFO - 1494434109: (..\main.cpp:23) Running on 4 threads
-INFO - 1494434109: (..\main.cpp:24) Ram usage level: 4
-INFO - 1494434109: (..\BlockUtils.cpp:907) blkfile dir: C:\Users\jeff\AppData\Roaming\Bitcoin\blocks
-INFO - 1494434109: (..\BlockUtils.cpp:908) lmdb dir: C:\Users\jeff\AppData\Roaming\Armory\databases
-INFO - 1494434109: (..\lmdb_wrapper.cpp:388) Opening databases...
-INFO - 1494434111: (..\BitcoinP2P.cpp:947) Connected to Bitcoin node
-INFO - 1494434111: (..\BDM_Server.cpp:996) registered bdv: eb0a1e06064ffaddef7b
-INFO - 1494434113: (..\BlockUtils.cpp:1091) Executing: doInitialSyncOnLoad
-INFO - 1494434113: (..\DatabaseBuilder.cpp:169) Reading headers from db
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 0 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 5 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 10 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 15 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 20 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 25 zc parser threads
-WARN - 1494434114: (..\BDM_supportClasses.cpp:1891) running 30 zc parser threads
-INFO - 1494434120: (..\DatabaseBuilder.cpp:208) Found 465669 headers in db
-INFO - 1494434123: (..\DatabaseBuilder.cpp:51) updating HEADERS db
-INFO - 1494434123: (..\DatabaseBuilder.cpp:477) Found next block after skipping 508317bytes
-INFO - 1494434124: (..\DatabaseBuilder.cpp:268) parsed block file #862
-INFO - 1494434125: (..\DatabaseBuilder.cpp:268) parsed block file #863
-DEBUG - 1494434125: (..\Blockchain.cpp:242) Organizing chain
-INFO - 1494434125: (..\DatabaseBuilder.cpp:56) updated HEADERS db in 2.139s
-INFO - 1494434125: (..\DatabaseBuilder.cpp:106) scanning new blocks from #465668 to #465771
-INFO - 1494434125: (..\BlockchainScanner.cpp:650) scanned from height #465668 to #465771
-INFO - 1494434125: (..\BlockchainScanner.cpp:225) scanned transaction history in 0.382s
-INFO - 1494434125: (..\DatabaseBuilder.cpp:156) scanned new blocks in 0.419s
-INFO - 1494434125: (..\DatabaseBuilder.cpp:160) init db in 12.574s
-INFO - 1494434125: (..\BlockUtils.cpp:1206) Enabling zero-conf tracking
-INFO - 1494434245: (..\BDM_Server.cpp:1025) unregistered bdv: eb0a1e06064ffaddef7b
after restart:
Hung on: Preparing Databases
Unsure if it was the same error as previous start
Code:
Log file opened at 1494434426: C:\Users\jeff\AppData\Roaming\Armory\dbLog.txt
-INFO - 1494434426: (..\main.cpp:23) Running on 4 threads
-INFO - 1494434426: (..\main.cpp:24) Ram usage level: 4
-INFO - 1494434426: (..\BlockUtils.cpp:907) blkfile dir: C:\Users\jeff\AppData\Roaming\Bitcoin\blocks
-INFO - 1494434426: (..\BlockUtils.cpp:908) lmdb dir: C:\Users\jeff\AppData\Roaming\Armory\databases
-INFO - 1494434426: (..\lmdb_wrapper.cpp:388) Opening databases...
-INFO - 1494434427: (..\BitcoinP2P.cpp:947) Connected to Bitcoin node
-INFO - 1494434428: (..\BDM_Server.cpp:996) registered bdv: 756b7c3b483e1b28a8b8
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 0 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 5 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 10 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 15 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 20 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 25 zc parser threads
-INFO - 1494434429: (..\BlockUtils.cpp:1091) Executing: doInitialSyncOnLoad
-INFO - 1494434430: (..\DatabaseBuilder.cpp:169) Reading headers from db
-INFO - 1494434433: (..\DatabaseBuilder.cpp:208) Found 465773 headers in db
-INFO - 1494434436: (..\DatabaseBuilder.cpp:51) updating HEADERS db
-INFO - 1494434436: (..\DatabaseBuilder.cpp:477) Found next block after skipping 170595bytes
-INFO - 1494434437: (..\DatabaseBuilder.cpp:268) parsed block file #863
-DEBUG - 1494434437: (..\Blockchain.cpp:242) Organizing chain
-INFO - 1494434437: (..\DatabaseBuilder.cpp:56) updated HEADERS db in 0.682s
-INFO - 1494434437: (..\DatabaseBuilder.cpp:106) scanning new blocks from #465772 to #465771
-INFO - 1494434437: (..\BlockchainScanner.cpp:52) no history to scan
-INFO - 1494434437: (..\BlockchainScanner.cpp:813) no SSH to scan
-INFO - 1494434437: (..\DatabaseBuilder.cpp:156) scanned new blocks in 0.014s
-INFO - 1494434437: (..\DatabaseBuilder.cpp:160) init db in 7.691s
-INFO - 1494434437: (..\BlockUtils.cpp:1206) Enabling zero-conf tracking
-WARN - 1494434438: (..\BDM_supportClasses.cpp:1891) running 35 zc parser threads
-INFO - 1494434557: (..\BDM_Server.cpp:1025) unregistered bdv: 756b7c3b483e1b28a8b8
-INFO - 1494434426: (..\main.cpp:23) Running on 4 threads
-INFO - 1494434426: (..\main.cpp:24) Ram usage level: 4
-INFO - 1494434426: (..\BlockUtils.cpp:907) blkfile dir: C:\Users\jeff\AppData\Roaming\Bitcoin\blocks
-INFO - 1494434426: (..\BlockUtils.cpp:908) lmdb dir: C:\Users\jeff\AppData\Roaming\Armory\databases
-INFO - 1494434426: (..\lmdb_wrapper.cpp:388) Opening databases...
-INFO - 1494434427: (..\BitcoinP2P.cpp:947) Connected to Bitcoin node
-INFO - 1494434428: (..\BDM_Server.cpp:996) registered bdv: 756b7c3b483e1b28a8b8
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 0 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 5 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 10 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 15 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 20 zc parser threads
-WARN - 1494434429: (..\BDM_supportClasses.cpp:1891) running 25 zc parser threads
-INFO - 1494434429: (..\BlockUtils.cpp:1091) Executing: doInitialSyncOnLoad
-INFO - 1494434430: (..\DatabaseBuilder.cpp:169) Reading headers from db
-INFO - 1494434433: (..\DatabaseBuilder.cpp:208) Found 465773 headers in db
-INFO - 1494434436: (..\DatabaseBuilder.cpp:51) updating HEADERS db
-INFO - 1494434436: (..\DatabaseBuilder.cpp:477) Found next block after skipping 170595bytes
-INFO - 1494434437: (..\DatabaseBuilder.cpp:268) parsed block file #863
-DEBUG - 1494434437: (..\Blockchain.cpp:242) Organizing chain
-INFO - 1494434437: (..\DatabaseBuilder.cpp:56) updated HEADERS db in 0.682s
-INFO - 1494434437: (..\DatabaseBuilder.cpp:106) scanning new blocks from #465772 to #465771
-INFO - 1494434437: (..\BlockchainScanner.cpp:52) no history to scan
-INFO - 1494434437: (..\BlockchainScanner.cpp:813) no SSH to scan
-INFO - 1494434437: (..\DatabaseBuilder.cpp:156) scanned new blocks in 0.014s
-INFO - 1494434437: (..\DatabaseBuilder.cpp:160) init db in 7.691s
-INFO - 1494434437: (..\BlockUtils.cpp:1206) Enabling zero-conf tracking
-WARN - 1494434438: (..\BDM_supportClasses.cpp:1891) running 35 zc parser threads
-INFO - 1494434557: (..\BDM_Server.cpp:1025) unregistered bdv: 756b7c3b483e1b28a8b8
armorylog.txt
Just the part of the last start.
Some parts are censored by replacing them with ###CENSORED###
Code:
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1138 - C++ block utilities loaded successfully
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1255 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1256 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1257 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1258 - ************************************************************
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1259 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1260 - ************************************************************
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1261 - Loading Armory Engine:
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1262 - Armory Version : 0.96
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1263 - Armory Build: : a3d01aa722
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1264 - PyBtcWallet Version : 1.35
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1265 - Detected Operating system: Windows
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1266 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1267 - User home-directory : C:\Users\jeff\AppData\Roaming
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1268 - Satoshi BTC directory : C:\Users\jeff\AppData\Roaming\Bitcoin\
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1269 - Armory home dir : C:\Users\jeff\AppData\Roaming\Armory\
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1270 - Detected System Specs :
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1271 - Total Available RAM : 15.91 GB
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1272 - CPU ID string : Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1273 - Number of CPU cores : 4 cores
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1274 - System is 64-bit : True
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1275 - Preferred Encoding : cp1252
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1276 - Machine Arch : amd64
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1277 - Available HDD (ARM) : 425 GB
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1278 - Available HDD (BTC) : 425 GB
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1279 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1280 - Network Name: Main Network
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1281 - Satoshi Port: 8333
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1282 - Do wlt check: True
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1283 - Named options/arguments to armoryengine.py:
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - thread_count : -1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rescan : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - ignoreAllZC : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rescanBalance : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - disableModules : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - port : None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - interport : 8223
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - coverageOutputDir: None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - forceWalletCheck: False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - regtest : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rebuild : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - nettimeout : 2
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - datadir : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - clearMempool : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - offline : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - armoryDBDir : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - armorydb_port : 9001
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - satoshiPort : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - useTorSettings : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - netlog : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - keypool : 100
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - coverageInclude : None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - forceOnline : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - redownload : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rpcBindAddr : 127.0.0.1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - armorydb_ip : 127.0.0.1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - multisigFile : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - ram_usage : -1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - mtdebug : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - logDisable : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - settingsPath : C:\Users\jeff\AppData\Roaming\Armory\ArmorySettings.txt
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - language : en
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - db_type : DB_FULL
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - doDebug : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - enableDetSign : True
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - disableConfPermis: False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - testnet : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rpcport : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - satoshiHome : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - satoshiRpcport : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - logFile : C:\Users\jeff\AppData\Roaming\Armory\ArmoryQt.exe.log.txt
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - verbosity : None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1286 - Other arguments:
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1289 - ************************************************************
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1692 - C++ block utilities loaded successfully
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:3590 - Using settings file: C:\Users\jeff\AppData\Roaming\Armory\ArmorySettings.txt
2017-05-10 18:40 (ERROR) -- ArmoryUtils.pyc:3747 - Unsupported language specified. Defaulting to English (en)
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:3750 - Using Language: en
2017-05-10 18:40 (INFO) -- BDM.pyc:368 - Using the asynchronous/multi-threaded BlockDataManager.
2017-05-10 18:40 (INFO) -- BDM.pyc:369 - Blockchain operations will happen in the background.
2017-05-10 18:40 (INFO) -- BDM.pyc:370 - Devs: check TheBDM.getState() before asking for data.
2017-05-10 18:40 (INFO) -- BDM.pyc:371 - Registering addresses during rescans will queue them for
2017-05-10 18:40 (INFO) -- BDM.pyc:372 - inclusion after the current scan is completed.
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:3590 - Using settings file: C:\Users\jeff\AppData\Roaming\Armory\ArmorySettings.txt
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2042 - loadWalletsAndSettings
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2102 - Loading wallets...
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2129 - ***WARNING: Duplicate wallet detected, ###CENSORED###
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2140 - Second wallet is more useful than the first one...
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2141 - Wallet 1 (skipped): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###__WatchOnly.wallet
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2142 - Wallet 2 (loaded): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###_.wallet
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2129 - ***WARNING: Duplicate wallet detected, ###CENSORED###
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2140 - Second wallet is more useful than the first one...
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2141 - Wallet 1 (skipped): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###__WatchOnly.wallet
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2142 - Wallet 2 (loaded): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###_.wallet
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2167 - Number of wallets read in: 8
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (No Encryption)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (No Encryption)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2177 - Loading Multisig Lockboxes
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1747 - acquiring process mutex...
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1385 - setupUriRegistration
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1503 - URL-register action: AskUser
2017-05-10 18:40 (INFO) -- ArmoryQt.py:558 - Usermode: Expert
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1681 - Changing usermode:
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1682 - From: Expert
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1690 - To: Expert
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1814 - startBitcoindIfNecessary
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-10 18:40 (WARNING) -- SDM.pyc:396 - Spawning DB with command:./ArmoryDB.exe --db-type="DB_FULL" --cookie --satoshi-datadir="C:\Users\jeff\AppData\Roaming\Bitcoin\blocks" --datadir="C:\Users\jeff\AppData\Roaming\Armory\" --dbdir="C:\Users\jeff\AppData\Roaming\Armory\databases"
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:665 - Executing popen: ['./ArmoryDB.exe', '--db-type="DB_FULL"', '--cookie', u'--satoshi-datadir="C:\\Users\\jeff\\AppData\\Roaming\\Bitcoin\\blocks"', u'--datadir="C:\\Users\\jeff\\AppData\\Roaming\\Armory\\"', u'--dbdir="C:\\Users\\jeff\\AppData\\Roaming\\Armory\\databases"']
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1882 - loadBlockchainIfNecessary
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1255 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1256 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1257 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1258 - ************************************************************
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1259 - Invoked: C:\Program Files (x86)\Armory\ArmoryQt.exe
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1260 - ************************************************************
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1261 - Loading Armory Engine:
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1262 - Armory Version : 0.96
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1263 - Armory Build: : a3d01aa722
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1264 - PyBtcWallet Version : 1.35
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1265 - Detected Operating system: Windows
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1266 - OS Variant : 7-6.1.7601-SP1-Multiprocessor Free
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1267 - User home-directory : C:\Users\jeff\AppData\Roaming
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1268 - Satoshi BTC directory : C:\Users\jeff\AppData\Roaming\Bitcoin\
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1269 - Armory home dir : C:\Users\jeff\AppData\Roaming\Armory\
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1270 - Detected System Specs :
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1271 - Total Available RAM : 15.91 GB
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1272 - CPU ID string : Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1273 - Number of CPU cores : 4 cores
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1274 - System is 64-bit : True
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1275 - Preferred Encoding : cp1252
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1276 - Machine Arch : amd64
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1277 - Available HDD (ARM) : 425 GB
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1278 - Available HDD (BTC) : 425 GB
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1279 -
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1280 - Network Name: Main Network
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1281 - Satoshi Port: 8333
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1282 - Do wlt check: True
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1283 - Named options/arguments to armoryengine.py:
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - thread_count : -1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rescan : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - ignoreAllZC : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rescanBalance : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - disableModules : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - port : None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - interport : 8223
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - coverageOutputDir: None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - forceWalletCheck: False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - regtest : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rebuild : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - nettimeout : 2
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - datadir : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - clearMempool : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - offline : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - armoryDBDir : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - armorydb_port : 9001
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - satoshiPort : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - useTorSettings : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - netlog : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - keypool : 100
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - coverageInclude : None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - forceOnline : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - redownload : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rpcBindAddr : 127.0.0.1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - armorydb_ip : 127.0.0.1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - multisigFile : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - ram_usage : -1
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - mtdebug : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - logDisable : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - settingsPath : C:\Users\jeff\AppData\Roaming\Armory\ArmorySettings.txt
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - language : en
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - db_type : DB_FULL
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - doDebug : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - enableDetSign : True
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - disableConfPermis: False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - testnet : False
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - rpcport : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - satoshiHome : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - satoshiRpcport : DEFAULT
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - logFile : C:\Users\jeff\AppData\Roaming\Armory\ArmoryQt.exe.log.txt
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1285 - verbosity : None
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1286 - Other arguments:
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1289 - ************************************************************
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:1692 - C++ block utilities loaded successfully
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:3590 - Using settings file: C:\Users\jeff\AppData\Roaming\Armory\ArmorySettings.txt
2017-05-10 18:40 (ERROR) -- ArmoryUtils.pyc:3747 - Unsupported language specified. Defaulting to English (en)
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:3750 - Using Language: en
2017-05-10 18:40 (INFO) -- BDM.pyc:368 - Using the asynchronous/multi-threaded BlockDataManager.
2017-05-10 18:40 (INFO) -- BDM.pyc:369 - Blockchain operations will happen in the background.
2017-05-10 18:40 (INFO) -- BDM.pyc:370 - Devs: check TheBDM.getState() before asking for data.
2017-05-10 18:40 (INFO) -- BDM.pyc:371 - Registering addresses during rescans will queue them for
2017-05-10 18:40 (INFO) -- BDM.pyc:372 - inclusion after the current scan is completed.
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:3590 - Using settings file: C:\Users\jeff\AppData\Roaming\Armory\ArmorySettings.txt
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2042 - loadWalletsAndSettings
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2102 - Loading wallets...
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2129 - ***WARNING: Duplicate wallet detected, ###CENSORED###
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2140 - Second wallet is more useful than the first one...
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2141 - Wallet 1 (skipped): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###__WatchOnly.wallet
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2142 - Wallet 2 (loaded): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###_.wallet
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2129 - ***WARNING: Duplicate wallet detected, ###CENSORED###
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2140 - Second wallet is more useful than the first one...
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2141 - Wallet 1 (skipped): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###__WatchOnly.wallet
2017-05-10 18:40 (WARNING) -- ArmoryQt.py:2142 - Wallet 2 (loaded): C:\Users\jeff\AppData\Roaming\Armory\armory_###CENSORED###_.wallet
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2167 - Number of wallets read in: 8
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (No Encryption)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (No Encryption)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2172 - Wallet ###CENSORED###" (Encrypted)
2017-05-10 18:40 (INFO) -- ArmoryQt.py:2177 - Loading Multisig Lockboxes
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1747 - acquiring process mutex...
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1385 - setupUriRegistration
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1503 - URL-register action: AskUser
2017-05-10 18:40 (INFO) -- ArmoryQt.py:558 - Usermode: Expert
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1681 - Changing usermode:
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1682 - From: Expert
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1690 - To: Expert
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1814 - startBitcoindIfNecessary
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1850 - setSatoshiPaths
2017-05-10 18:40 (WARNING) -- SDM.pyc:396 - Spawning DB with command:./ArmoryDB.exe --db-type="DB_FULL" --cookie --satoshi-datadir="C:\Users\jeff\AppData\Roaming\Bitcoin\blocks" --datadir="C:\Users\jeff\AppData\Roaming\Armory\" --dbdir="C:\Users\jeff\AppData\Roaming\Armory\databases"
2017-05-10 18:40 (INFO) -- ArmoryUtils.pyc:665 - Executing popen: ['./ArmoryDB.exe', '--db-type="DB_FULL"', '--cookie', u'--satoshi-datadir="C:\\Users\\jeff\\AppData\\Roaming\\Bitcoin\\blocks"', u'--datadir="C:\\Users\\jeff\\AppData\\Roaming\\Armory\\"', u'--dbdir="C:\\Users\\jeff\\AppData\\Roaming\\Armory\\databases"']
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1882 - loadBlockchainIfNecessary
2017-05-10 18:40 (INFO) -- ArmoryQt.py:1900 - Setting netmode: 1
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:40 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:41 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
2017-05-10 18:42 (INFO) -- ArmoryQt.py:4619 - Dashboard switched to "Scanning" mode
After restart: same problem
Restarting BitcoinCore before this restart did not solve it.
I re-installed 0.95.1 because rebuilding the Armory database every day is annoying.
* I had created a backup of my 0.95.1 wallets before I upgraded to 0.96
* Removing all wallet-files of 0.96
* Restoring all wallet-files of 0.95.1
* emptying %appdata%\Armory\databases
* Installing 0.95.1 over 0.96
0.95.1 is running fine now.
Jump to: