I'm sleeping shortly and will wake earlier to see the auction end. Keep the bids coming guys!
that's what I call dedication!
Topic: ASICMINER Auction: 10 Block Erupter Blades -ended- - page 10. (Read 102577 times)
that's what I call dedication!
I'm sleeping shortly and will wake earlier to see the auction end. Keep the bids coming guys!
Courtesy recap of potential winners:
Time left:
Timer removed. End time: 2013-04-19+16:02:08
Courtesy recap of potential winners:
| JHenderson | BTC71.5 |
| delaria | BTC71 |
| alexuk | BTC70 |
| jgarzik | BTC66 |
| LainZ | BTC65 |
| lan787 | BTC65 |
| otter | BTC64 |
| Pinwheel | BTC64 |
| Pinwheel | BTC64 |
| BlackLilac | BTC63.5 |
Time left:
Timer removed. End time: 2013-04-19+16:02:08
To add to the collectibility, the AM team should pose with it and include the pic for the winner. Maybe a certificate of authenticity and a "Board X of 10" number on it? Come on guys, market that shit!
Not to forget that THE FORUM TIME is binding! (and not the timer clock time)
Mention it because I expect some bids in the last seconds
Who wouldn't want the first sold ASICMINER Block Erupter Blade?
The auction lasts for roughly 72 hours and ends at April 19, 09:00:00 PM forum time.
Mention it because I expect some bids in the last seconds
Who wouldn't want the first sold ASICMINER Block Erupter Blade?
Sorry for the double post but I can't edit my last one.
Add 8 seconds to it to be precise (or 7 or 9..)
Added that for OCD. Add 8 seconds to it to be precise
(or 7 or 9..) Thanks again!Less than 7 hours left - bid guys!
Sorry for the double post but I can't edit my last one.
Add 8 seconds to it to be precise (or 7 or 9..)
Add 8 seconds to it to be precise
(or 7 or 9..) To prevent any problems in the last 2 minutes:
Maybe change the timer + 2 minutes so that the forum time and the clock beneath your post are synchronised?
Changed that, thanks for pointing that out. Maybe change the timer + 2 minutes so that the forum time and the clock beneath your post are synchronised?
Courtesy recap of potential winners:
| delaria | BTC71 |
| alexuk | BTC70 |
| jgarzik | BTC66 |
| LainZ | BTC65 |
| lan787 | BTC65 |
| otter | BTC64 |
| Pinwheel | BTC64 |
| Pinwheel | BTC64 |
| BlackLilac | BTC63.5 |
| pixel75 | BTC63.5 |
Time left:
Timer removed. End time: 2013-04-19+16:02:08
To prevent any problems in the last 2 minutes:
Maybe change the timer + 2 minutes so that the forum time and the clock beneath your post are synchronised?
Maybe change the timer + 2 minutes so that the forum time and the clock beneath your post are synchronised?
You'll have to deal with the 30+- 5830 for a single small board of 10GH/s. Trust me, you don't want to deal with the heat and maintenance when they start to pile up.
Hi there guys,
Just one question: does this board come preconfigured to work with a pool or can you get it to work with any pool of your choice or alternatively do solo mining?
Also, any screenshot of the software just to have a idea of how does it look like?
Thx.
You can get it work with multiple pools. I'm not sure about this, but solo mining should be possible you run the daemon yourself.Just one question: does this board come preconfigured to work with a pool or can you get it to work with any pool of your choice or alternatively do solo mining?
Also, any screenshot of the software just to have a idea of how does it look like?
Thx.
No screenshots were made available to me yet, but I'll ask friedcat for this.
Quote
Quick Installation The setup is almost self-explained. After assembly and powering up, access 192.168.1.254:8000 from your PC for configuration.
Great, if you can find out about solo mining specially when several boards are purchased and a screenshot of the soft will be greatly appreciated. Thx.
Yes, that's true! Finally found someone who has done his homework now.
John, just in the interest of full disclosure, are you receiving any compensation for running this auction?
Ok, thanks for the honesty
Devils advocate, you would receive double the MH/$ with a 5830, than by paying $8300 for 10GH... sure, power consumption, but finding a place with power inclusive is easy, hell, I'm renting one as my office at the moment.
You'll have to deal with the 30+- 5830 for a single small board of 10GH/s. Trust me, you don't want to deal with the heat and maintenance when they start to pile up.
Hi there guys,
Just one question: does this board come preconfigured to work with a pool or can you get it to work with any pool of your choice or alternatively do solo mining?
Also, any screenshot of the software just to have a idea of how does it look like?
Thx.
You can get it work with multiple pools. I'm not sure about this, but solo mining should be possible you run the daemon yourself.Just one question: does this board come preconfigured to work with a pool or can you get it to work with any pool of your choice or alternatively do solo mining?
Also, any screenshot of the software just to have a idea of how does it look like?
Thx.
No screenshots were made available to me yet, but I'll ask friedcat for this.
Quote
Quick Installation The setup is almost self-explained. After assembly and powering up, access 192.168.1.254:8000 from your PC for configuration.
Devils advocate, you would receive double the MH/$ with a 5830, than by paying $8300 for 10GH... sure, power consumption, but finding a place with power inclusive is easy, hell, I'm renting one as my office at the moment.
With 5830s you need board, PSU, CPU, HDD... And how many cards will you need to get 10GH/s? At least 30. That's a lot of noise!
Hi there guys,
Just one question: does this board come preconfigured to work with a pool or can you get it to work with any pool of your choice or alternatively do solo mining?
Also, any screenshot of the software just to have a idea of how does it look like?
Thx.
Just one question: does this board come preconfigured to work with a pool or can you get it to work with any pool of your choice or alternatively do solo mining?
Also, any screenshot of the software just to have a idea of how does it look like?
Thx.
Devils advocate, you would receive double the MH/$ with a 5830, than by paying $8300 for 10GH... sure, power consumption, but finding a place with power inclusive is easy, hell, I'm renting one as my office at the moment.
John,
sorry can you remove my bid as I just deal for Avalon (with you as escrow)?
regards,
dp
sorry can you remove my bid as I just deal for Avalon (with you as escrow)?
regards,
dp
You cannot remove your bid, this has been reiterated multiple times already. Seeing as you have the lowest bids and 7 hours left, wait like everyone else and see what the turn out will be.
John,
sorry can you remove my bid as I just deal for Avalon (with you as escrow)?
regards,
dp
sorry can you remove my bid as I just deal for Avalon (with you as escrow)?
regards,
dp
You cannot remove your bid, this has been reiterated multiple times already. Seeing as you have the lowest bids and 7 hours left, wait like everyone else and see what the turn out will be.
John,
sorry can you remove my bid as I just deal for Avalon (with you as escrow)?
regards,
dp
sorry can you remove my bid as I just deal for Avalon (with you as escrow)?
regards,
dp
BFL advertisement "5 GH/s for $275" looks funny in this thread
Hi there,
Does anyone know where to order a case for the board(s), preferrably in Germany? It doesn't necessarily have to be the 19"-rack shown in one of the pictures. A case for 1-4 units would be great.
I'll ask friedcat if he can sell you the case he's using now - it would be trivial to add that rack together with your order. (assuming if you've won the bid) Does anyone know where to order a case for the board(s), preferrably in Germany? It doesn't necessarily have to be the 19"-rack shown in one of the pictures. A case for 1-4 units would be great.
Jump to: