Greetings everyone!
I am wondering is anyone running Asus Prime Z270-P on Ubuntu 16.04 - Desktop.
I had 4 GPU-s running smooth and when i added 5th if i had 4G decoding, i had blank black screen when i booted, if i turned it off i could log with 5 gpus but system didnt recognize fifth, had only GPU 0 1 2 3. If i removed 5th card i had problems again lol.
SO basicaly i can do this - have 5 gpus with 4G on and have 1 as not recognized or have 4 with 4G off. Its something like that, maybe it was vice versa, but basicaly system either didnt boot even with 5 gpus or it didnt shown 5th if it managed to boot.
But anyway! Can anyone help me please how to set up BIOS and options in there to have 5 6 or even more GPUS working on my ASUS prime 270p
PLEASE HELP!
I BEG YOU
Topic: Asus prime Z270-p - page 12. (Read 31605 times)
My problem is when I add 4th graphic card my loading page comes like this:
I have tried "above 4g" but system goes to a boot loop with no picture.
Searched the forum it was already answered. It was something with UEFI. I have tried "above 4g" but system goes to a boot loop with no picture.
My problem is when I add 4th graphic card my loading page comes like this:
http://azaraeen.com/no-usb.png
I have tried "above 4g" but system goes to a boot loop with no picture.
http://azaraeen.com/no-usb.png
I have tried "above 4g" but system goes to a boot loop with no picture.
Turn off 4g decoding. Add 1 card at a time. Once the 5th card is installed, and the drivers installed, and youre in windows and its showing a code 12, THEN turn on 4g decoding.
Can you help me please. I have Prime z270-a. I already update the bios. actually all available bios update on asus website. why i dont get the settings 4g enable? can someone help me please. i cant run more than 4cards
PLEASE HELP. Thank you!
with z270a with 8 gpu i use gen 3,
with gen 1 not work on linux, but it work only on window don't tell me why.
with gen 1 not work on linux, but it work only on window don't tell me why.
Pluging in the cards one by one in consecutive reboots worked, thank you for the tip (8 hours uptime so far) 
Try gen 2, i switched to Gen 2 too.
I have the same mb, I gotten 5 cards to work, with 4g decoding turned on, and all settings possible set at gen 1, when I plug in card 6 it shows bios splash 2 times then black screen.
Try gen 2, i switched to Gen 2 too.
Thank you all, i will try the adviced steps.
I have the same mb, I gotten 5 cards to work, with 4g decoding turned on, and all settings possible set at gen 1, when I plug in card 6 it shows bios splash 2 times then black screen.
Here is a walk-through I found on Youtube that got me up and running with my Asus H270 Plus. Probably same settings in the Bios
https://bitcointalksearch.org/topic/asus-h270-plus-6-cards-how-to-vidio-1899977
https://bitcointalksearch.org/topic/asus-h270-plus-6-cards-how-to-vidio-1899977
Turn off 4g decoding. Add 1 card at a time. Once the 5th card is installed, and the drivers installed, and youre in windows and its showing a code 12, THEN turn on 4g decoding.
I have the following configuration
Asus prime Z270-p
Celeron 3930
4gb DDR4
6x RX480 (MSI gaming x 4gb version)
M.2 harddrive
When i try to use more than 3 card the system does not boot up(actualy does not even show up the bios press delete option if i recall correctly)
I have enabdled the above 4g decoding(newwest BIOS) and set all PCIE to gen 1. Is there anything else that needs to be set in order for 6 cards to work? I'm clueless what I'm doing wrong.
Asus prime Z270-p
Celeron 3930
4gb DDR4
6x RX480 (MSI gaming x 4gb version)
M.2 harddrive
When i try to use more than 3 card the system does not boot up(actualy does not even show up the bios press delete option if i recall correctly)
I have enabdled the above 4g decoding(newwest BIOS) and set all PCIE to gen 1. Is there anything else that needs to be set in order for 6 cards to work? I'm clueless what I'm doing wrong.
Jump to: