If you still have problems disable the internal GPU and connect your monitor for setup to the card in your first x16 slot.
Add one card after another.
Happy mining!
P.S. if you connect a monitor to the mainboard, the internal GPU gets activated automatically.
Topic: Asus prime Z270-p - page 8. (Read 31605 times)
anyone try the 2270-A?
it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
i have z270a, 9 cards on linux and 8 cards on Windows, works well.it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
A guy in YouTube can run even 12 cards on this mobo, i haven't tired.
you could do 8 amd and 4 nvidia on windows right?
Theese boards are a little bit tricky but once you get them to work they work like a charm ....
I lost like 3 days to get CARBON board from msi to work with 7 cards ....
yeah same here fuck msi carbon, these ones at least work if you do all the required stepsI lost like 3 days to get CARBON board from msi to work with 7 cards ....
I returned all my msi carbon boards and pros
Theese boards are a little bit tricky but once you get them to work they work like a charm ....
I lost like 3 days to get CARBON board from msi to work with 7 cards ....
I lost like 3 days to get CARBON board from msi to work with 7 cards ....
anyone try the 2270-A?
it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
i have z270a, 9 cards on linux and 8 cards on Windows, works well.it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
A guy in YouTube can run even 12 cards on this mobo, i haven't tired.
you could do 8 amd and 4 nvidia on windows right?
anyone try the 2270-A?
it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
i have z270a, 9 cards on linux and 8 cards on Windows, works well.it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
A guy in YouTube can run even 12 cards on this mobo, i haven't tired.
anyone try the 2270-A?
it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
it has 7 slots and two m2s as well
answered my own question it worked, this one actually has two m2 slots so theoretically it could do 9 but im told windows 10 only recognizes 8
Hi Guys,
I am new here and I was also having the same issue , till 2 GPUs Z270P was working fine but once I add my 3rd GPU windows was crashing. So I upgrade bios 1st to the latest version of now which is PRIME-Z270-P-ASUS-0610.CAP , For me also Internet download was not working so simply I install from usb stick.
1st : Upgrade BIOS to 610 version
2nd : Go Advanced ----> System Agent (SA) Configuration ----> Enable "Above 4 G Decoding"
3rd : DMI/OPI CONFIGURATION ---> DMI MAX LINK SPEED change to GEN1
4th : PEG PORT CONFIGURATION ---> PCIEX16_1 LINK SPEED change to GEN1
Thats all I did not change PCH CONFIGUTATION configuration like other bro did and for me now mining is stable and running without any windows crash etc. from last 20 hours.
Share is care. So keep sharing and keep Caring
Kudos
Rebel
I am new here and I was also having the same issue , till 2 GPUs Z270P was working fine but once I add my 3rd GPU windows was crashing. So I upgrade bios 1st to the latest version of now which is PRIME-Z270-P-ASUS-0610.CAP , For me also Internet download was not working so simply I install from usb stick.
1st : Upgrade BIOS to 610 version
2nd : Go Advanced ----> System Agent (SA) Configuration ----> Enable "Above 4 G Decoding"
3rd : DMI/OPI CONFIGURATION ---> DMI MAX LINK SPEED change to GEN1
4th : PEG PORT CONFIGURATION ---> PCIEX16_1 LINK SPEED change to GEN1
Thats all I did not change PCH CONFIGUTATION configuration like other bro did and for me now mining is stable and running without any windows crash etc. from last 20 hours.
Share is care. So keep sharing and keep Caring
Kudos
Rebel
This config worked for me. I couldn't make it work with more than 4 GPUs
Special notes: I had the latest BIOS installed. I think it's 0810
I had connected my monitor to my onboard GPU and did not work.
I disconnected the monitor and started windows 10 with no monitor. I usually connect and manage my miner with teamviewer or google remote desktop.
it worker with 5 GPUS.
Thanks for your great help.
i got the asus Z270-P and 13GPU's
i have problems getting more than 7 to work.
I got this pcie extensions. Looks like a riser but u can connect up to 4 risers to it.
When i connect 8 cards. Sometimes it only get 5, sometimes 6 and sometimes 7. But never all the 8.
Also the system keeps crushing, and flashing black screen.
Is it at all possible to get more than 8gpu's working on that board? I have problems getting the riser extensions to work ~~
i am using windows 10, but rdy to change the os if this will solve my problem ~~
i have problems getting more than 7 to work.
I got this pcie extensions. Looks like a riser but u can connect up to 4 risers to it.
When i connect 8 cards. Sometimes it only get 5, sometimes 6 and sometimes 7. But never all the 8.
Also the system keeps crushing, and flashing black screen.
Is it at all possible to get more than 8gpu's working on that board? I have problems getting the riser extensions to work ~~
i am using windows 10, but rdy to change the os if this will solve my problem ~~
I received my 8th card yesterday and popped it in, turned on the computer and everything is all good. Bios version 0810, 006c risers, generic M.2 pcie converters and ssd running Windows 10 Pro. I did install the latest drivers from Asus for LAN, VGA, and I think chipset. I left audio alone as it's disabled. I am not sure if the driver updates are a must or not but I figured it couldn't hurt.
http://tohktohk.com/pics/miner1.jpg
http://tohktohk.com/pics/miner2.jpg
http://tohktohk.com/pics/miner1.jpg
http://tohktohk.com/pics/miner2.jpg
one advice for making 6+ gpu rigs: first of all make sure that one single cards shows picture on monitor stabbed in EVERY single PCIe and M.2 or PCIe splitter or whatever else you use, until than you have to play with those GEN1,2,3 settings. Mine board (h270 plus) is working with everything set to GEN2. Also not to mention that 4g decoding ON is must option. For 8+ GPU you have to use win10 (dont know about win 8.1), 7 gpu works fine on win7. Also have in mind that m.2 adapters are shitty quality and half of them doesnt work, so picture test is must option
First thing I did was the bios update to 810 then enable '4G decoding'. I started the bios setting at gen2 for all without success and then gen1 for all without any success. I then tried leaving everything on auto and just setting the pcie configuration on gen1 and all seven cards were recognized. After all the video cards were seen, I didn't try adjusting the setting at all. It took a weekend to get my rig up and running I didn't want to test to see if there were gains to be made from setting anything on gen1 or gen2.
I am also using the blue 006C version. Odd thing is the first eight I ordered from Amazon came with the little tabs that lock the riser on the card but the second time I ordered it, it came without the tabs but seems to fit much tighter on the card. They are both working fine though. I ordered the second set thinking it was the risers that was causing the original problem but that wasn't it.
On a side note my two MSI Armor Geforce GTX 1070 OC Edition 8GB seems to run the hottest at 60-64 degrees. Others are in the 50-55 range.
I am also using the blue 006C version. Odd thing is the first eight I ordered from Amazon came with the little tabs that lock the riser on the card but the second time I ordered it, it came without the tabs but seems to fit much tighter on the card. They are both working fine though. I ordered the second set thinking it was the risers that was causing the original problem but that wasn't it.
On a side note my two MSI Armor Geforce GTX 1070 OC Edition 8GB seems to run the hottest at 60-64 degrees. Others are in the 50-55 range.
I've got 7x 1070's running in my rig also. I'm using the blue version 006c 6pin risers. I set mine to "gen1" pcie. does gen1, gen2, or gen3 work better?
I currently have 7 gtx 1070 running and am just waiting on the 8th card to arrive. Thanks to those who posted on this thread as I read all of it before getting my rig to run last weekend!
It's currently using two evga cards, two msi cards, two zotac cards and one asus card (with another asus card coming). It just sort of worked out in pairs as I purchase four cards used and four cards new from Amazon.
915 Watts. Less than I expected.
http://tohktohk.com/pics/killawatt.jpg
http://tohktohk.com/pics/afterburner.jpg
Just need to make sure everything is stable before doing some cable managing.
http://tohktohk.com/pics/fans.jpg
It's currently using two evga cards, two msi cards, two zotac cards and one asus card (with another asus card coming). It just sort of worked out in pairs as I purchase four cards used and four cards new from Amazon.
915 Watts. Less than I expected.
http://tohktohk.com/pics/killawatt.jpg
http://tohktohk.com/pics/afterburner.jpg
Just need to make sure everything is stable before doing some cable managing.
http://tohktohk.com/pics/fans.jpg
In win 10 8 gpu setup works without even installing separately the nvidia drivers. I would be happier to achieve it with win 7 but at least it works 
On my both rigs i get 8th gpu detected in device manager and everything seems ok for few seconds but then 1 of the gpus allways gets an exclamation mark.
So I hope it's win 7 related and i'm going to try win10.
So I hope it's win 7 related and i'm going to try win10.
Hi everybody!
I see a few have 8 gpu's running via M.2 adapters. Can SATA and M.2 ports be used at the same time or do you have to boot from an USB-drive?
I see a few have 8 gpu's running via M.2 adapters. Can SATA and M.2 ports be used at the same time or do you have to boot from an USB-drive?
I currently have 7 gtx 1070 running and am just waiting on the 8th card to arrive. Thanks to those who posted on this thread as I read all of it before getting my rig to run last weekend!
It's currently using two evga cards, two msi cards, two zotac cards and one asus card (with another asus card coming). It just sort of worked out in pairs as I purchase four cards used and four cards new from Amazon.
915 Watts. Less than I expected.
http://tohktohk.com/pics/killawatt.jpg
http://tohktohk.com/pics/afterburner.jpg
Just need to make sure everything is stable before doing some cable managing.
http://tohktohk.com/pics/fans.jpg
It's currently using two evga cards, two msi cards, two zotac cards and one asus card (with another asus card coming). It just sort of worked out in pairs as I purchase four cards used and four cards new from Amazon.
915 Watts. Less than I expected.
http://tohktohk.com/pics/killawatt.jpg
http://tohktohk.com/pics/afterburner.jpg
Just need to make sure everything is stable before doing some cable managing.
http://tohktohk.com/pics/fans.jpg
I have 2 rigs with 7 pascal gpus mining without problems on win7 x64.
The bios 0808 and all 3 pci-e related settings to gen3. Pimary gpu adapter set to pcie, audio disabled, serial port disabled.
The bios 0808 and all 3 pci-e related settings to gen3. Pimary gpu adapter set to pcie, audio disabled, serial port disabled.
Win 7 ? i have tried 6 but not yet 7... anyway 8 gpu is not a problem with z270p + win10 ...
anyone tried 12 gpu....?
goodluck
ETH mining? It must be amd then... nvidia is another story. AMD works also with pci-e spllitters so no problems running more cards in a single rig.
Nope its Nvidia .... there is no option for amd here in my country......
Jump to: