Asus prime Z270-p - page 7. | Bitcointalksearch.org

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: car1999 on August 16, 2017, 06:27:29 AM

Quote from: Marvell1 on August 13, 2017, 05:01:49 PM

ok this is a strange one , i got a third AR version of this chipset its the prime Z270-AR

the other two are working fine with 8 cards , 7 on pcie and one on m2 adapter , this board

worked fine wth 4g decoding and 5 cards, two days later tried to add 3 more cards, now it crashes right away after bios screen, uninstalled drivers wit uud, i see all 8 cards , crashes again when trying to update driver.

tried to rol back to my original 5 card build removing the extra 3 cards same crash when installing drivers

same crap happens when i reinstall win 10 ... flakey board?

try to install an older nvidia driver.

It was an amd build, It was a bad card or something maybe the riser

spinx

full member

Activity: 139

Merit: 100

Quote from: Yannick99 on August 20, 2017, 09:42:57 AM

Quote

Hi, i have a serious issue with my new z270-p board. No slots works with risers, i have tried them with a dozen differrent. All the right settings in bios (4g envoding, gen 1 etc), latest bios and fresh windows 10 install. Gpu-fan is running but cards doesnt show up, tried with 5 different cards (and they do work connected directly in pci-e slot). Any ideas

What kind of riser ? molex, sata, 12v only

How do you connect power in ?

Hi, they are usb3 with molex on riser card and an additional 6-pin pci-e at the card.

Yannick99

newbie

Activity: 47

Merit: 0

Quote

Hi, i have a serious issue with my new z270-p board. No slots works with risers, i have tried them with a dozen differrent. All the right settings in bios (4g envoding, gen 1 etc), latest bios and fresh windows 10 install. Gpu-fan is running but cards doesnt show up, tried with 5 different cards (and they do work connected directly in pci-e slot). Any ideas

What kind of riser ? molex, sata, 12v only

How do you connect power in ?

anubyss

newbie

Activity: 11

Merit: 0

It would help to isolate driver issues. The OP mentioned this is his third Z270-AR board. Is it running the same vid cards and OS?

Quote from: Makak4R on August 19, 2017, 11:09:42 AM

Quote from: car1999 on August 16, 2017, 06:27:29 AM

try to install an older nvidia driver.

how this can help? Huh

anubyss

newbie

Activity: 11

Merit: 0

If you plug the vid card directly in and it works, then it's not the mobo, power supply, OS or driver. You are only left with how everything is connected with the riser (everything seated correctly). Have you tried just one video card with the riser? Try resetting the mobo to factory and plug in just one video card with the riser. It won't matter if 4g encoding is on or not with one card. The point is to get one working to rule out what you can before complicating it with multiple cards.

Quote from: spinx on August 19, 2017, 12:02:03 PM

Hi, i have a serious issue with my new z270-p board. No slots works with risers, i have tried them with a dozen differrent. All the right settings in bios (4g envoding, gen 1 etc), latest bios and fresh windows 10 install. Gpu-fan is running but cards doesnt show up, tried with 5 different cards (and they do work connected directly in pci-e slot). Any ideas?

spinx

full member

Activity: 139

Merit: 100

Hi, i have a serious issue with my new z270-p board. No slots works with risers, i have tried them with a dozen differrent. All the right settings in bios (4g envoding, gen 1 etc), latest bios and fresh windows 10 install. Gpu-fan is running but cards doesnt show up, tried with 5 different cards (and they do work connected directly in pci-e slot). Any ideas?

Makak4R

full member

Activity: 266

Merit: 111

Quote from: car1999 on August 16, 2017, 06:27:29 AM

try to install an older nvidia driver.

how this can help? Huh

car1999

full member

Activity: 350

Merit: 100

Quote from: Marvell1 on August 13, 2017, 05:01:49 PM

ok this is a strange one , i got a third AR version of this chipset its the prime Z270-AR

the other two are working fine with 8 cards , 7 on pcie and one on m2 adapter , this board

worked fine wth 4g decoding and 5 cards, two days later tried to add 3 more cards, now it crashes right away after bios screen, uninstalled drivers wit uud, i see all 8 cards , crashes again when trying to update driver.

tried to rol back to my original 5 card build removing the extra 3 cards same crash when installing drivers

same crap happens when i reinstall win 10 ... flakey board?

try to install an older nvidia driver.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

ok this is a strange one , i got a third AR version of this chipset its the prime Z270-AR

the other two are working fine with 8 cards , 7 on pcie and one on m2 adapter , this board

worked fine wth 4g decoding and 5 cards, two days later tried to add 3 more cards, now it crashes right away after bios screen, uninstalled drivers wit uud, i see all 8 cards , crashes again when trying to update driver.

tried to rol back to my original 5 card build removing the extra 3 cards same crash when installing drivers

same crap happens when i reinstall win 10 ... flakey board?

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: shadow1975 on August 11, 2017, 03:57:38 AM

There is something wrong with both 16X PCIE, beacuse in BIOS under Advanced-PEG Port Configuration option PCIEX16_1 is set to NOT PRESENT !!! I can't change that value, on working motherboard in other rig, this setting is set to x1.

Update BIOS.

shadow1975

newbie

Activity: 26

Merit: 0

Quote from: anubyss on August 10, 2017, 01:01:30 PM

Plug in one card to one of the 16x slots to see if the computer sees it. Now test the other 16x slot with the same card. If both slots work with one video card then most likely it's not a faulty slot on the mobo.

Quote from: shadow1975 on August 09, 2017, 02:18:03 PM

Im using:

ASUS Prime Z270-P
6 x MSI RX 580 8GB Hynix memory
64-bit Windows 7

Board has 4x 1x PCIE and 2x 16x PCIE.

If I plug same card in all 1X PCIE it's working. If I plug in two 16x PCIE, computer doesn't recognise the card.

Is it fault 16X PCIE ports ( faulty motherboard) or is some settings in BIOS ?

There is something wrong with both 16X PCIE, beacuse in BIOS under Advanced-PEG Port Configuration option PCIEX16_1 is set to NOT PRESENT !!! I can't change that value, on working motherboard in other rig, this setting is set to x1.

anubyss

newbie

Activity: 11

Merit: 0

Plug in one card to one of the 16x slots to see if the computer sees it. Now test the other 16x slot with the same card. If both slots work with one video card then most likely it's not a faulty slot on the mobo.

Quote from: shadow1975 on August 09, 2017, 02:18:03 PM

Im using:

ASUS Prime Z270-P
6 x MSI RX 580 8GB Hynix memory
64-bit Windows 7

Board has 4x 1x PCIE and 2x 16x PCIE.

If I plug same card in all 1X PCIE it's working. If I plug in two 16x PCIE, computer doesn't recognise the card.

Is it fault 16X PCIE ports ( faulty motherboard) or is some settings in BIOS ?

ssdaytona

newbie

Activity: 20

Merit: 0

well I am splitting my vga cables. I figured that they can power 150w cards for the 8pin connector, so I used a splitter and with a undervolted 1070 or 1060, it seems to be working fine. cables aren't even warm to touch.

Quote from: Enigma54 on August 08, 2017, 10:11:14 PM

It took me a while to get all 6 gpu's recognized but I managed after many attempts! Now I'm tempted to try a 7th and 8th GPU using m.2 PCIE adapters like some of you guys, but how are you powering a 7th and 8th GPU? I'm using a EVGA 1200W power supply and it only has 6 VGA connectors/cables and I assume it's not a good idea to use a Y-splitter cable for the extra two GPU's. My 6-rig GPU is using about 735W as I'm limiting the power to 60% on MSI Afterburner.

Are you guys using a SATA-PCIE cable of some sort? Is that safe?

shadow1975

newbie

Activity: 26

Merit: 0

Im using:

ASUS Prime Z270-P
6 x MSI RX 580 8GB Hynix memory
64-bit Windows 7

Board has 4x 1x PCIE and 2x 16x PCIE.

If I plug same card in all 1X PCIE it's working. If I plug in two 16x PCIE, computer doesn't recognise the card.

Is it fault 16X PCIE ports ( faulty motherboard) or is some settings in BIOS ?

ssdaytona

newbie

Activity: 20

Merit: 0

PEG Port config. I changed it to gen1

p.s. I now have 8 gpus and onboard graphics running at same time. I am very surprised that no one has gotten 9gpu's to run on widows. I might try with the z270-a that I have coming.

Quote from: Damien360 on August 07, 2017, 04:25:24 AM

@ssdaytona: which GEN1 config worked for you?
DMI MAX LINK SPEED? PEG PORT CONFIGURATION? PCH CONFIGUTATION?

Enigma54

newbie

Activity: 11

Merit: 0

It took me a while to get all 6 gpu's recognized but I managed after many attempts! Now I'm tempted to try a 7th and 8th GPU using m.2 PCIE adapters like some of you guys, but how are you powering a 7th and 8th GPU? I'm using a EVGA 1200W power supply and it only has 6 VGA connectors/cables and I assume it's not a good idea to use a Y-splitter cable for the extra two GPU's. My 6-rig GPU is using about 735W as I'm limiting the power to 60% on MSI Afterburner.

Are you guys using a SATA-PCIE cable of some sort? Is that safe?

dominuspro

full member

Activity: 201

Merit: 100

Quote from: Damien360 on August 07, 2017, 04:25:24 AM

@ssdaytona: which GEN1 config worked for you?
DMI MAX LINK SPEED? PEG PORT CONFIGURATION? PCH CONFIGUTATION?

I have all those set to gen3. All my problems came from bad m.2 adapters or risers. The new risers seems worse to me than the old ones with molex power connectors. More bad pieces...

Damien360

newbie

Activity: 8

Merit: 0

@ssdaytona: which GEN1 config worked for you?
DMI MAX LINK SPEED? PEG PORT CONFIGURATION? PCH CONFIGUTATION?

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: ssdaytona on August 06, 2017, 10:27:50 PM

I have to say, the 0810 BIOS is best. I just recently added a seventh card to my z270-p that had a 0610 BIOS and it was crashing every 5-10minutes, updated to 0810 and made the necessary gen1 change. viola, works great.

can we have 8 gpus and the onboard graphics at the same time?

yes

ssdaytona

newbie

Activity: 20

Merit: 0

I have to say, the 0810 BIOS is best. I just recently added a seventh card to my z270-p that had a 0610 BIOS and it was crashing every 5-10minutes, updated to 0810 and made the necessary gen1 change. viola, works great.

can we have 8 gpus and the onboard graphics at the same time?

Topic: Asus prime Z270-p - page 7. (Read 31605 times)