Pages:
Author

Topic: Avalon A7 announced - page 24. (Read 147640 times)

hero member
Activity: 979
Merit: 510
October 15, 2017, 05:31:42 PM
so this is what 1 of my 6 is looking like now...

https://imgur.com/a/JazL3



have you tried with a different PSU ?

yea...switched out totally from a 2400 watt to a 1200 watt...but still same thing when I power up..... Embarrassed

can you connect just this avalon  to a controller?  no other 741..  and try to look in CGMINER API Logs... let's see if it says anything..

got it....will give that a shot....thanks...come back to ya....

You might also try a different port on the controller, and also different AUC cords.
I haven't had this work for me, but worth a try after ruling out PSU or cable issue.
Though I don't think any of these work beyond swapping PSU, since it would be an all or nothing issue with the port, controller or AUC cable, and since it's partially working, don't see how it could be that.
full member
Activity: 128
Merit: 100
October 15, 2017, 03:29:51 PM
so this is what 1 of my 6 is looking like now...

https://imgur.com/a/JazL3



have you tried with a different PSU ?

yea...switched out totally from a 2400 watt to a 1200 watt...but still same thing when I power up..... Embarrassed

can you connect just this avalon  to a controller?  no other 741..  and try to look in CGMINER API Logs... let's see if it says anything..

got it....will give that a shot....thanks...come back to ya....
member
Activity: 66
Merit: 10
October 15, 2017, 03:14:11 PM
so this is what 1 of my 6 is looking like now...

https://imgur.com/a/JazL3



have you tried with a different PSU ?

yea...switched out totally from a 2400 watt to a 1200 watt...but still same thing when I power up..... Embarrassed

can you connect just this avalon  to a controller?  no other 741..  and try to look in CGMINER API Logs... let's see if it says anything..
full member
Activity: 128
Merit: 100
October 15, 2017, 02:53:42 PM
so this is what 1 of my 6 is looking like now...

https://imgur.com/a/JazL3



have you tried with a different PSU ?

yea...switched out totally from a 2400 watt to a 1200 watt...but still same thing when I power up..... Embarrassed
member
Activity: 66
Merit: 10
October 15, 2017, 02:33:44 PM
so this is what 1 of my 6 is looking like now...

https://imgur.com/a/JazL3



have you tried with a different PSU ?
member
Activity: 66
Merit: 10
October 15, 2017, 02:14:34 PM
agreed.

if I have no answer in a few days, i will try to open them..  maybe i'm way too optimistic, but it's possible to have a loose wire from the shipment (saw how the cargo is handled in airports and warehouses)  or something not soldered well on the pcb ?
hero member
Activity: 979
Merit: 510
October 15, 2017, 02:08:17 PM
well, at least i'm not the only one with problems, but this is not a good news..

I had big hopes from caanan.

Same here, I have no ill will towards them and hope they are able to sort themselves out to support both large and small orders with a fair delivery delay and payment method.
I felt they were going to be the new Spoondoolies, catering perfectly to small orders and large orders with quick support and amazing reliability in build quality.
My early 741 batches are all still 100% working, just like my SP20Es and S5s still work to this day with not a single dead chip, let alone a dead board.
However the most recent batch of 741s had 2 bad boards.
At this point they most likely won't respond on here or online until the new miners are released by both Bitmain and Canaan to the public.
Because of all this, I am back to recommending BM as they have yet to actually do me wrong, they are just usually so-so quality and long shipping delays.
If my next batch from Minerwarez is similar to my last batch of 741 with 2 bad boards, then BM will actually be leading reliability as well once again, which is sad Sad .


member
Activity: 66
Merit: 10
October 15, 2017, 01:59:26 PM
well, at least i'm not the only one with problems, but this is not a good news..

I had big hopes from caanan.
hero member
Activity: 979
Merit: 510
October 15, 2017, 01:43:26 PM
What is the status of Canaan anyway?

-Fred
Not sure of the actual business, but from a client's perspective:

Support has not responded in months to a warranty claim and also dead boards.
I had originally had perfect response times back in the early Avalon 6 and 721, days at most, not months like now.
Also had 0 hardware issues on the first few batches, but the later batches seem to have more issues and getting close to Antminer quality, time will tell.
I've ordered 4 times from Canaan and Minerwarez in the past month and a half, and all 4 were cancelled by staff due to various issues on their side which are mentioned earlier in this thread.
I have a 5th order currently set to ship in November, but not holding my breath.
Others seem to be receiving miners from minerwarez with a dead hashboard (66 instead of 88 TA in logs) which is what two of my late batch miners have now as well.
No response on what to do about it, and at this point I assume they've let the warranty expire by not replying.

So overall, they've joined the ranks of just another ASIC company, and no longer receive any business from our team until things improve as there are much better deals now and with better support response times from other vendors.

Feels like once large miners caught wind of the reliability, quick shipping and support response, they instantly switched over to target bulk orders like other ASIC providers.
However they left their original small clients who worshiped their company and wrote positive reviews which allowed them to attract large orders, in the dust.

Sell a single pallet, or deal with 60 unique client orders with limited staff for the same profit.  I can't really blame them, just stinks that the smaller miners once again take back seat.
This has already started to affect their sales at least on my side, already my "small" affiliates that ordered single pallets have shifted back to the big BM as they had numerous order issues and support issues back after August.

I really miss just being able to order a few miners for myself or affiliates when they had stock, get a response in a day or so with a BTC address, pay it, and usually have my miner at the datacenter in less than a week.
Now it's order, pay, wait a month, hope your order doesn't get cancelled randomly and also hope they are still around when it's your time to ship the product you already paid for or hopefully get a refund.
I don't believe anyone knows anything about Minerwarez, so at this point paying with BTC seems a bit risky, but so far we don't have a reason to be worried about this.
jr. member
Activity: 63
Merit: 1
http://ckpool.org
October 15, 2017, 01:11:44 PM
What is the status of Canaan anyway?

-Fred
full member
Activity: 128
Merit: 100
October 15, 2017, 01:10:31 PM
so this is what 1 of my 6 is looking like now...

https://imgur.com/a/JazL3

full member
Activity: 235
Merit: 100
October 15, 2017, 12:25:43 PM
just for posterity.  (https://imgur.com/a/bHnuP)




This really looks like a power issue, the miners look fine. I also get a blue led in the center and 4 green inside.
newbie
Activity: 12
Merit: 0
October 15, 2017, 08:37:42 AM
Just looked for new firmware for my 741 when I discovered this:

http://build.canaan-creative.com:8080/~buildbot/avalon8/

Can we expect a new miner soon?

Anybody got news for us Tongue

https://canaan.io is currently under maintenance but in the store there is nothing new https://canaan.io/shop/

A new miner release would be best in time with btc price skyrocking to the moon Smiley
member
Activity: 66
Merit: 10
October 15, 2017, 01:47:31 AM
just for posterity.  (https://imgur.com/a/bHnuP)




Did anybody else had this problem with minerwarez's batches?

Q:  Maybe some connectors poped-out during shippment?  I'm not familiar with the internal wiring in 741, so not sure if it's possible.


Update:

https://imgur.com/a/HGMkM

The PSU have green light on the left side, and green and yellow on the right side. Is that ok?
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
October 14, 2017, 04:05:46 PM
thanks a lot philip!

pm sent.

I replied
member
Activity: 66
Merit: 10
October 14, 2017, 02:54:48 PM
thanks a lot philip!

pm sent.
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
October 14, 2017, 01:29:53 PM
newbie
Activity: 17
Merit: 0
October 14, 2017, 01:09:22 PM
44 minutes later, with fan 10% and voltage -1 .  same situation

i will switch to raspb3 now

Update:  no change.
Checked both PSU  (all 4 braker boards). Voltage ok: 12.4 V

Can somebody please post a CGMINER API Log from the interface?

Thanks!


Here's mine

Code:
[Firmware Version] => Avalon Firmware - 20170719
    luci: 0
    cgminer: 2
    cgminer-packages: e
Reply was 'STATUS=S,When=1507827597,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV70,Elapsed=196685,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM ID1=Ver[7411706-3162860]
    DNA[013abaad83d4f4ab]
    Elapsed[68495]
    MW[757636 757636 757636 757636]
    LW[3030544]
    MH[351 323 332 343]
    HW[1349]
    DH[3.794%]
    Temp[38]
    TMax[87]
    Fan[5430]
    FanR[89%]
    Vi[1170 1170 1192 1192]
    Vo[4272 4291 4314 4346]
    GHSmm[7842.36]
    WU[103434.15]
    Freq[696.23]
    PG[15]
    Led[0]
    MW0[2804 2719 2921 2776 2777 2811 2679 2620 2843 2730 2694 2620 2595 2720 2651 2679 2693 2807 2787 2748 2744 2929]
    MW1[2794 2785 2860 2697 2721 2741 2737 2654 2722 2723 2563 2754 2553 2724 2659 2761 2689 2753 2730 2748 2599 2770]
    MW2[2802 2792 2747 2708 2735 2656 2734 2726 2529 2711 2642 2550 2681 2727 2510 2570 2772 2784 2711 2777 2751 2658]
    MW3[2546 2588 2621 2510 2510 2577 2615 2511 2634 2659 2605 2504 2631 2578 2703 2369 2519 2742 2481 2633 2656 2607]
    TA[88]
    ECHU[0 0 0 0]
    ECMM[0]
    FM[1]
    CRC[0 0 0 0]
    PAIRS[0 0 0]
    PVT_T[21-74/10-84/79 21-76/13-85/80 21-75/13-87/83 21-76/10-84/79],MM Count=1,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC Sensor=12483,AUC Temperature=38.18,Connection Overloaded=false,Voltage Offset=-2,Nonce Mask=29,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=196685,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=5500.00000000,Min Diff=4098.00000000,Max Diff=6918.00000000,Min Diff Count=34449,Max Diff Count=6819,Times Sent=61629,Bytes Sent=8304650,Times Recv=68160,Bytes Recv=10917800,Net Bytes Sent=8304650,Net Bytes Recv=10917800|STATS=2,ID=POOL1,Elapsed=196685,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=152,Times Recv=5,Bytes Recv=1537,Net Bytes Sent=152,Net Bytes Recv=1537|STATS=3,ID=POOL2,Elapsed=196685,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=152,Times Recv=5,Bytes Recv=1537,Net Bytes Sent=152,Net Bytes Recv=1537|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1507827597
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.10.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AV70
   [Elapsed] => 196685
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [MM ID1] => Ver[7411706-3162860]
    DNA[013abaad83d4f4ab]
    Elapsed[68495]
    MW[757636 757636 757636 757636]
    LW[3030544]
    MH[351 323 332 343]
    HW[1349]
    DH[3.794%]
    Temp[38]
    TMax[87]
    Fan[5430]
    FanR[89%]
    Vi[1170 1170 1192 1192]
    Vo[4272 4291 4314 4346]
    GHSmm[7842.36]
    WU[103434.15]
    Freq[696.23]
    PG[15]
    Led[0]
    MW0[2804 2719 2921 2776 2777 2811 2679 2620 2843 2730 2694 2620 2595 2720 2651 2679 2693 2807 2787 2748 2744 2929]
    MW1[2794 2785 2860 2697 2721 2741 2737 2654 2722 2723 2563 2754 2553 2724 2659 2761 2689 2753 2730 2748 2599 2770]
    MW2[2802 2792 2747 2708 2735 2656 2734 2726 2529 2711 2642 2550 2681 2727 2510 2570 2772 2784 2711 2777 2751 2658]
    MW3[2546 2588 2621 2510 2510 2577 2615 2511 2634 2659 2605 2504 2631 2578 2703 2369 2519 2742 2481 2633 2656 2607]
    TA[88]
    ECHU[0 0 0 0]
    ECMM[0]
    FM[1]
    CRC[0 0 0 0]
    PAIRS[0 0 0]
    PVT_T[21-74/10-84/79 21-76/13-85/80 21-75/13-87/83 21-76/10-84/79]
   [MM Count] => 1
   [Smart Speed] => 1
   [Connecter] => AUC
   [AUC VER] => AUC-20151208
   [AUC I2C Speed] => 400000
   [AUC I2C XDelay] => 19200
   [AUC Sensor] => 12483
   [AUC Temperature] => 38.18
   [Connection Overloaded] => false
   [Voltage Offset] => -2
   [Nonce Mask] => 29
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 0 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 196685
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 5500.00000000
   [Min Diff] => 4098.00000000
   [Max Diff] => 6918.00000000
   [Min Diff Count] => 34449
   [Max Diff Count] => 6819
   [Times Sent] => 61629
   [Bytes Sent] => 8304650
   [Times Recv] => 68160
   [Bytes Recv] => 10917800
   [Net Bytes Sent] => 8304650
   [Net Bytes Recv] => 10917800
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 196685
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 2
   [Bytes Sent] => 152
   [Times Recv] => 5
   [Bytes Recv] => 1537
   [Net Bytes Sent] => 152
   [Net Bytes Recv] => 1537
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 196685
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 2
   [Bytes Sent] => 152
   [Times Recv] => 5
   [Bytes Recv] => 1537
   [Net Bytes Sent] => 152
   [Net Bytes Recv] => 1537
)
[/code]
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
October 14, 2017, 12:38:40 PM
44 minutes later, with fan 10% and voltage -1 .  same situation

i will switch to raspb3 now

Update:  no change.
Checked both PSU  (all 4 braker boards). Voltage ok: 12.4 V

Can somebody please post a CGMINER API Log from the interface?

Thanks!



once again  you don't wait 2 hours  it takes time to show.

so what  do you have after 44 minutes?

which is not long enoguh  to test.

at -1  you should go over 14th  but it takes more then 44 minutes.

although  I don't like that row of zeroes you have.

at the moment I can not access my 721's or 741's

but I can tell you   44 minutes 7 minute is too low. 144 minutes and you got to 11.9 th


just run a long test  stop looking at the logs.





ok, i will leave it like this until morning (it's 21 here).

but that TA = 66   (66 asics instead of 88) gives me nightmares Sad


yeah trust me i do not like it either.  I can not access my 741 or 721 until monday  but I will dump both logs then.
member
Activity: 66
Merit: 10
October 14, 2017, 12:34:21 PM
44 minutes later, with fan 10% and voltage -1 .  same situation

i will switch to raspb3 now

Update:  no change.
Checked both PSU  (all 4 braker boards). Voltage ok: 12.4 V

Can somebody please post a CGMINER API Log from the interface?

Thanks!



once again  you don't wait 2 hours  it takes time to show.

so what  do you have after 44 minutes?

which is not long enoguh  to test.

at -1  you should go over 14th  but it takes more then 44 minutes.

although  I don't like that row of zeroes you have.

at the moment I can not access my 721's or 741's

but I can tell you   44 minutes 7 minute is too low. 144 minutes and you got to 11.9 th


just run a long test  stop looking at the logs.



ok, i will leave it like this until morning (it's 21 here).

but that TA = 66   (66 asics instead of 88) gives me nightmares Sad
Pages:
Jump to: