Topic: Avalon A7 announced - page 28. (Read 147611 times)
Is the 6th November sale over? It's not EST noon time but the batch looks like sold out...
Dang...I can't get the image to show of the "Avalon Devices Status".....
So if someone can suggest what the issue might be.....
So if someone can suggest what the issue might be.....
Hi guys...so this morning I see 1 of my 6 avalons not hashing....the blue light is on on the hardware....any ideas of the cause and what to do to resolve....
thanks
thanks
Welp, all of my AUC3s apparently came "unflashed". I sent Steve an email but they haven't responded yet so I'm just putting this here. Anyone know how to flash the AUC3 converter?
Are you familiar with avr programming? If so you may be in luck. The AUC uses a NXP mcu that can programmed using LPCXpresso IDE freeware. You can look at their repo for it here: github.com/Canaan-Creative/Avalon-USB-converter
Welp, all of my AUC3s apparently came "unflashed". I sent Steve an email but they haven't responded yet so I'm just putting this here. Anyone know how to flash the AUC3 converter?
lmfaoo I'll bet.
BUT shipping what 2 weeks sooner then the S9??? I think I'd stick to the S9
BUT shipping what 2 weeks sooner then the S9??? I think I'd stick to the S9
Yeah this time I went for s9s
lmfaoo I'll bet.
BUT shipping what 2 weeks sooner then the S9??? I think I'd stick to the S9
BUT shipping what 2 weeks sooner then the S9??? I think I'd stick to the S9
Tomorrow at Noon (Est) they will be available again
Well btc is going up I wonder how fast they sellout
Tomorrow at Noon (Est) they will be available again
Hey guys.....for some reason starting last night, I noticed on my ckpool app, that I started losing connection to the pool, and of course get the usual email that a "share hasn't submitted a share in the last 5 min. Happened about 5 times. Course after about 10 min or so....it would restart back up without any intervention on my part. But it just did it again 5 min ago...and waiting for it to pick up again...any ideas?
Your net connection to the pool was spotty.
Kano had an issue pool side.
Thanks Phil...
Hey guys.....for some reason starting last night, I noticed on my ckpool app, that I started losing connection to the pool, and of course get the usual email that a "share hasn't submitted a share in the last 5 min. Happened about 5 times. Course after about 10 min or so....it would restart back up without any intervention on my part. But it just did it again 5 min ago...and waiting for it to pick up again...any ideas?
Your net connection to the pool was spotty.
Kano had an issue pool side.
Hey guys.....for some reason starting last night, I noticed on my ckpool app, that I started losing connection to the pool, and of course get the usual email that a "share hasn't submitted a share in the last 5 min. Happened about 5 times. Course after about 10 min or so....it would restart back up without any intervention on my part. But it just did it again 5 min ago...and waiting for it to pick up again...any ideas?
Looks like Canaan has been testing a controller build an Avalon8 machine 
This is correct and very interesting in my opinion as well.
When you look at every file that has been added or modified for the A8, you'll notice that they are using a new ASIC chip A3210 with it.
There are also short mentions about the AvalonMiner 821 miner.
here is a merge pull request for the Avalon8:
https://github.com/Canaan-Creative/Avalon-extras/commit/93d1647fbb4fd9d33b851371d7967a780217d51b
Quote from: Canaan @Github
Merge pull request #37 from XzxEmbedded/avalon8
Add Avalon8 support
Add Avalon8 support
Looks like Canaan has been testing a controller build an Avalon8 machine
that would be nice.
maybe a few more chips
and more hash
say 10th at 1100 watts
Looks like Canaan has been testing a controller build an Avalon8 machine
Not quite sure if anyone experience this problem. My last batch of 60 avalons had pretty much 50% dead AUC3 converters. The little light turns on but the green/blue light doesn't.
Anyone got the same problem? Anyone know how to fix these little buggers?
Anyone got the same problem? Anyone know how to fix these little buggers?
https://canaan.io/ still off line.
30 dead auc's = really bad.
I know you have a lot of experience. but maybe if you use a really good brick they would work
http://www.ebay.com/itm/Anker-Quick-Charge-3-0-63W-5-Port-USB-Wall-Charger-PowerPort-Speed-5-for-Galaxy-/152612236453?
now to make really sure enough power is going to the rasp pi buy this
http://www.ebay.com/itm/2pcs-USB2-0-Dual-Male-to-Micro-USB-5P-Male-Y-Cable-for-Hard-Disk-Drive-Case-/132046800996?
and finally use that same one
http://www.ebay.com/itm/2pcs-USB2-0-Dual-Male-to-Micro-USB-5P-Male-Y-Cable-for-Hard-Disk-Drive-Case-/132046800996?
to the auc
so anker brick > dual usb micro usb cable >>> > rasp pi 3 >>> dual usb micro usb cable >>> auc >>>> five pin >>>> avalon 741
about 18 months ago I did the two 25 avalon 6 group buys when auc's were bad we would do better bricks and better cables.
Hey Phil, thanks for the info as always man! I'll see if I can get these little bastards to fire up. The funny thing is, all the old ones from the last batch seems to work fine.........wierd.
In other news: 20 L3+ = 3 dead hashboard in 3 days........No RMA in sight. At this rate I think my 741s are probably gonna break even faster than the l3+'s. And those things costs MORE. What kind of world are we living in?
Hi guys,
I have some news for you. After I sent email to minerwarez about the shocking shipping prices, they admitted that there really was a problem with the shipping calculator.
*screenshot here:
https://i.imgur.com/9ozcU9Th.jpg
I also noticed that I am not the only one who has this problem. Some other guys in facebook also complained about the shipping prices. So the question is how many of you or how many of the customers have been illegally charged with more money than the real shipping price?
I have some news for you. After I sent email to minerwarez about the shocking shipping prices, they admitted that there really was a problem with the shipping calculator.
Quote
Hello,
Yes it is a problem with the shipping calculator we have let them know and we should have it back to the correct function shortly.
Thanks,
Nick
Yes it is a problem with the shipping calculator we have let them know and we should have it back to the correct function shortly.
Thanks,
Nick
*screenshot here:
https://i.imgur.com/9ozcU9Th.jpg
I also noticed that I am not the only one who has this problem. Some other guys in facebook also complained about the shipping prices. So the question is how many of you or how many of the customers have been illegally charged with more money than the real shipping price?
What a choice
Preorder Avalon 741, shipping November 6
or
Preorder Antminer S9, shipping November 21
Let me think about this...
Preorder Avalon 741, shipping November 6
or
Preorder Antminer S9, shipping November 21
Let me think about this...
Not quite sure if anyone experience this problem. My last batch of 60 avalons had pretty much 50% dead AUC3 converters. The little light turns on but the green/blue light doesn't.
Anyone got the same problem? Anyone know how to fix these little buggers?
Anyone got the same problem? Anyone know how to fix these little buggers?
https://canaan.io/ still off line.
30 dead auc's = really bad.
I know you have a lot of experience. but maybe if you use a really good brick they would work
http://www.ebay.com/itm/Anker-Quick-Charge-3-0-63W-5-Port-USB-Wall-Charger-PowerPort-Speed-5-for-Galaxy-/152612236453?
now to make really sure enough power is going to the rasp pi buy this
http://www.ebay.com/itm/2pcs-USB2-0-Dual-Male-to-Micro-USB-5P-Male-Y-Cable-for-Hard-Disk-Drive-Case-/132046800996?
and finally use that same one
http://www.ebay.com/itm/2pcs-USB2-0-Dual-Male-to-Micro-USB-5P-Male-Y-Cable-for-Hard-Disk-Drive-Case-/132046800996?
to the auc
so anker brick > dual usb micro usb cable >>> > rasp pi 3 >>> dual usb micro usb cable >>> auc >>>> five pin >>>> avalon 741
about 18 months ago I did the two 25 avalon 6 group buys when auc's were bad we would do better bricks and better cables.
Jump to: