[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 192.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: danielocdh on March 25, 2019, 05:25:52 PM

So I was finally able to catch and collect data on the miners stopping issue I had before.

Both miners are managed profit miners.
The "offline detection" emails were sent at around 11:16:20 (as expected/configured).
The status on the awesome miner manager was "Stopped" (at around 14:40).
There wasn't any miner software running when I VNCed to the miner (at around 14:40).
The miners can mine Equihash 150,5 correctly most of the time(with gminer).
If I'm reading the logs correctly I think awesome miner used bminer but it is configured to use gminer for Equihash 150,5.
I tested setting it to bminer for Equihash 150,5, screenshot below.

I replaced my bitcoin addresses for "xxx" on the logs.
I replaced repeated "nVidia driver version" entries for "..." on the logs.
On the screenshots Z270XP1 uses profit profile 1070-1, Z270XP3 uses profit profile 1070-3

screenshots:
https://imgur.com/a/zr85dwb

logs:
https://pastebin.com/Lzxh4T2Y
https://pastebin.com/AXpRk6mm

I understand the miner software tried to restart 3 times (as configured), I'm not sure what failed but I think awesome miner should just keep going, jump to the next algorithm(retry again x times if needed) or something like that.

Is there any reason bminer was used for Equihash 150,5 when gminer is configured? or maybe I'm misreading the logs?

Thanks

Thanks for the details.

Would it also be possible for your to send me the Awesome Miner log file for the same period of time (around 25/3/2019 11:13)? Please send the log file by mail to make sure no sensitive information is shared. Thanks!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: MoparMiningLLC on March 25, 2019, 02:17:42 PM

any way to add support to read temps for the Antminer T15's? I can see it when directly on miner UI but AM reads temps as zero.

Can you please send me the API report for this miner and I can review and correct the problem. Please select the T15 miner and go to the toolbar Tools -> API Report and send me the output via mail or PM. Thanks!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: trucobit on March 25, 2019, 01:57:56 PM

Quote from: patrike on March 25, 2019, 05:43:16 AM

Quote from: trucobit on March 24, 2019, 06:29:02 PM

PAtrike this like crazy waiting for your update, where we can specify the url of the Explorer and get the direct difficulty. Today I have been mining a coin, which days ago if the difficulty worked well, but today it stops at a predetermined value and the profit is very high. I have mined badly, that coin has been put and then the difficulty with the coin explorer was more than double

I hope you give priority to that new function, because it is sorely needed. Any function that helps obtain such fundamental data well, will be a great improvement. And I think that right now is the most important for AM, from my point of view.

There will be a development release with the new Dynamic Update feature for Coin Properties - it's not that far away now.

You will find the documentation here:
https://support.awesomeminer.com/support/solutions/articles/35000115480-load-coin-properties-from-a-custom-source

For what I read in documentation, there will not be as you indicated above to be able to add an Explorer url or at least the most popular, to read directly the difficulty in real time there. That would be a very important point.

I mention it because you commented it like that before. There is nothing better than reading the difficulty without delay in the explorer of each coin
example

http://explorer.choosebitcash.com/api/getdifficulty

for me there is no better data provider, the vast majority use Inquidus as the default browser. It would be nice to add the difficulty of this source. Because although CC is more accurate than CTM at this point, nothing is more immediate and real than reading the difficulty of the coin explorer. I know that in all you can not do it because of the type of explorer you use, but in 80 or 90% of the coins you can do it.

What changes the most fundamental data is the difficulty, this data to obtain it directly is a very good bonus. I hope everything can be done from the panel and are not options just for the api.

This is fully supported. This is referred to as a "plain value" in the documentation. You can simply enter a URL like the one above and you don't have to enter anything else - and Awesome Miner will load the difficulty based on the response.

Awesome Miner do however not provide any of these URL's for you - you still need to find a data source and then enter the URL in Awesome Miner.

You are correct that the documentation didn't have any specific example for this scenario, so I will add that as well. Please see the updates on the same documentation link. Thanks for your feedback!

danielocdh

newbie

Activity: 22

Merit: 0

So I was finally able to catch and collect data on the miners stopping issue I had before.

Both miners are managed profit miners.
The "offline detection" emails were sent at around 11:16:20 (as expected/configured).
The status on the awesome miner manager was "Stopped" (at around 14:40).
There wasn't any miner software running when I VNCed to the miner (at around 14:40).
The miners can mine Equihash 150,5 correctly most of the time(with gminer).
If I'm reading the logs correctly I think awesome miner used bminer but it is configured to use gminer for Equihash 150,5.
I tested setting it to bminer for Equihash 150,5, screenshot below.

I replaced my bitcoin addresses for "xxx" on the logs.
I replaced repeated "nVidia driver version" entries for "..." on the logs.
On the screenshots Z270XP1 uses profit profile 1070-1, Z270XP3 uses profit profile 1070-3

screenshots:
https://imgur.com/a/zr85dwb

logs:
https://pastebin.com/Lzxh4T2Y
https://pastebin.com/AXpRk6mm

I understand the miner software tried to restart 3 times (as configured), I'm not sure what failed but I think awesome miner should just keep going, jump to the next algorithm(retry again x times if needed) or something like that.

Is there any reason bminer was used for Equihash 150,5 when gminer is configured? or maybe I'm misreading the logs?

Thanks

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

any way to add support to read temps for the Antminer T15's? I can see it when directly on miner UI but AM reads temps as zero.

trucobit

jr. member

Activity: 756

Merit: 2

Quote from: patrike on March 25, 2019, 05:43:16 AM

Quote from: trucobit on March 24, 2019, 06:29:02 PM

PAtrike this like crazy waiting for your update, where we can specify the url of the Explorer and get the direct difficulty. Today I have been mining a coin, which days ago if the difficulty worked well, but today it stops at a predetermined value and the profit is very high. I have mined badly, that coin has been put and then the difficulty with the coin explorer was more than double

I hope you give priority to that new function, because it is sorely needed. Any function that helps obtain such fundamental data well, will be a great improvement. And I think that right now is the most important for AM, from my point of view.

There will be a development release with the new Dynamic Update feature for Coin Properties - it's not that far away now.

You will find the documentation here:
https://support.awesomeminer.com/support/solutions/articles/35000115480-load-coin-properties-from-a-custom-source

For what I read in documentation, there will not be as you indicated above to be able to add an Explorer url or at least the most popular, to read directly the difficulty in real time there. That would be a very important point.

I mention it because you commented it like that before. There is nothing better than reading the difficulty without delay in the explorer of each coin
example

http://explorer.choosebitcash.com/api/getdifficulty

for me there is no better data provider, the vast majority use Inquidus as the default browser. It would be nice to add the difficulty of this source. Because although CC is more accurate than CTM at this point, nothing is more immediate and real than reading the difficulty of the coin explorer. I know that in all you can not do it because of the type of explorer you use, but in 80 or 90% of the coins you can do it.

What changes the most fundamental data is the difficulty, this data to obtain it directly is a very good bonus. I hope everything can be done from the panel and are not options just for the api.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Sibtigr on March 24, 2019, 10:43:07 PM

Patrick
Describe in more detail the process of installing a second agent on a computer to create a manga CPU and GPU on a single computer

The general concept is that you run the Awesome Miner main application on one computer, and on all other mining computers where you want to do GPU/CPU mining you install one instance of Remote Agent per mining computer.

When you have installed and started the Remote Agent application on the mining computer(s), you can use the "New miner" button in the toolbar to add one or many GPU/CPU mining instances for this mining computer. When selecting "Managed Miner" or "Managed Profit Miner" in the wizard, you can define "Miner host" where you can add a new entry pointing to your remove mining computer.

You can create one Managed Miner for GPU mining and another Managed Miner for CPU mining. Both point to the same "Miner host" where Remote Agent is running.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: trucobit on March 24, 2019, 06:29:02 PM

PAtrike this like crazy waiting for your update, where we can specify the url of the Explorer and get the direct difficulty. Today I have been mining a coin, which days ago if the difficulty worked well, but today it stops at a predetermined value and the profit is very high. I have mined badly, that coin has been put and then the difficulty with the coin explorer was more than double

I hope you give priority to that new function, because it is sorely needed. Any function that helps obtain such fundamental data well, will be a great improvement. And I think that right now is the most important for AM, from my point of view.

There will be a development release with the new Dynamic Update feature for Coin Properties - it's not that far away now.

You will find the documentation here:
https://support.awesomeminer.com/support/solutions/articles/35000115480-load-coin-properties-from-a-custom-source

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: darkneorus on March 23, 2019, 06:11:16 PM

@patrike besides that I would suggest adding core voltage lock to NVIDIA clocking profiles. that should be easy to implement, with just one NvAPI call.

also I've found a bug with native OC on mixed AMD/NVIDIA rigs - in my case, when applying the profiles for AMD GPUs, some of them like fan speed, fan mode and power limit are applied to NVIDIAs as well.

Thanks for the suggestions.

I'm actually not familiar with this NVAPI call related to core voltage lock. Do you have any more information about this feature?

If you have a Clocking Profile that contains properties supported by both AMD and nVidia (fan speed and a few more), they will be applied to all GPU's that support these properties. A profile is not specific for AMD or nVidia, it's just a number of GPU properties to be set. You may need to define Group Clocking Profiles on mixed systems, where you define that one Clocking Profile should be applied to the AMD cards and another one to the nVidia cards.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: powerstr on March 23, 2019, 10:51:33 AM

http://prntscr.com/n1wdkr
I, too, can not understand why they both do not want to work

This could be some incompatibility between a specific GPU, driver and mining software. A good troubleshooting step would be to find out of any other mining software works better on these GPU's.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Siolim on March 23, 2019, 06:09:45 AM

Quote from: patrike on March 23, 2019, 02:47:50 AM

Quote from: Siolim on March 22, 2019, 07:02:26 PM

Quote from: patrike on March 22, 2019, 05:37:13 PM

Quote from: Siolim on March 21, 2019, 06:34:06 PM

Hi, Patrick. It seems that the www.coincalculators.io API signals have changed, all the numbers are not correct. Current Revenue (BTC / day) instead of USD

It's correct that there have been API changes and I've received information from the Coincalculators admin about the changes.

Right now you will run into problems if you use "CoinCalculators exchange rate" set to either Highest Bid or Lowest Ask, but from what I can see it should work better with Default.

I will adjust Awesome Miner to these changes.

It helped, but not for all coins.

Thanks for the update. Could you please give an example of a coin where it didn't work? Then I can verify the solution I'm preparing actually works for that one as well. Thanks!

Hello.
Coin SPK. but this is because of the price southXchange 0.22 .... BTC, with complexity normally
DIN also the price is not correct
BZEdge

Thanks for letting me know. The same adjustment I made to CoinCalculators in general should be working for these coins as well.

Sibtigr

newbie

Activity: 18

Merit: 0

Patrick
Describe in more detail the process of installing a second agent on a computer to create a manga CPU and GPU on a single computer

trucobit

jr. member

Activity: 756

Merit: 2

Quote from: darkneorus on March 23, 2019, 06:11:16 PM

Quote from: O-Coin on March 23, 2019, 11:19:01 AM

Quote from: trucobit on March 22, 2019, 05:59:47 AM

Quote from: O-Coin on March 21, 2019, 09:17:30 AM

NATIVE OverClocking NVIDIA
Driver Version 416.34

Anyone notice that while using this feature the gpu core will be throttled well before the fans move to 100%.
Example

Set Temp limit to 65c fan speed auto.
AM will maintain that temp.
Gpu Fan will speed will not go up to 100% because temp is maintained due to throttling Core.

If I move fan speed to 100% remove auto fan Gpu core goes back up and drastically improves hash rate. (20%-30% improvement)

Maybe Im missing something please let me know if I am.

AMD clocking is great because it has the fan target temp and temp Limit

I do not have that problem. Native OC is perfect for me.

What drivers are you using?

what are you describing is not a bug, it's meant to be that way with NVIDIA GPUs. the temp limit sets the max temperature for a GPU, after reaching that temp the core will throttle, but it does not affect the fan curve in any way. maybe some day Awesome Miner will have its own fan control with desired fan speed/temp tables or curves, but for now you should disable automatic fan speed and set your fans to 90-100%, or use MSI Afterburner to set your custom fan curve.

@patrike besides that I would suggest adding core voltage lock to NVIDIA clocking profiles. that should be easy to implement, with just one NvAPI call.

also I've found a bug with native OC on mixed AMD/NVIDIA rigs - in my case, when applying the profiles for AMD GPUs, some of them like fan speed, fan mode and power limit are applied to NVIDIAs as well.

I have several rigs all nvidia, all with native OC, all with the native auto speed, and I do not have that problem, there are times that are even at 30 or 40%. I have not noticed any problem in that aspect.

Since I use native OC, for me everything is much more stable when the OC and the automatic speed is perfect.

trucobit

jr. member

Activity: 756

Merit: 2

PAtrike this like crazy waiting for your update, where we can specify the url of the Explorer and get the direct difficulty. Today I have been mining a coin, which days ago if the difficulty worked well, but today it stops at a predetermined value and the profit is very high. I have mined badly, that coin has been put and then the difficulty with the coin explorer was more than double

I hope you give priority to that new function, because it is sorely needed. Any function that helps obtain such fundamental data well, will be a great improvement. And I think that right now is the most important for AM, from my point of view.

O-Coin

jr. member

Activity: 61

Merit: 2

Quote from: darkneorus on March 23, 2019, 06:11:16 PM

Quote from: O-Coin on March 23, 2019, 11:19:01 AM

Quote from: trucobit on March 22, 2019, 05:59:47 AM

Quote from: O-Coin on March 21, 2019, 09:17:30 AM

NATIVE OverClocking NVIDIA
Driver Version 416.34

Anyone notice that while using this feature the gpu core will be throttled well before the fans move to 100%.
Example

Set Temp limit to 65c fan speed auto.
AM will maintain that temp.
Gpu Fan will speed will not go up to 100% because temp is maintained due to throttling Core.

If I move fan speed to 100% remove auto fan Gpu core goes back up and drastically improves hash rate. (20%-30% improvement)

Maybe Im missing something please let me know if I am.

AMD clocking is great because it has the fan target temp and temp Limit

I do not have that problem. Native OC is perfect for me.

What drivers are you using?

what are you describing is not a bug, it's meant to be that way with NVIDIA GPUs. the temp limit sets the max temperature for a GPU, after reaching that temp the core will throttle, but it does not affect the fan curve in any way. maybe some day Awesome Miner will have its own fan control with desired fan speed/temp tables or curves, but for now you should disable automatic fan speed and set your fans to 90-100%, or use MSI Afterburner to set your custom fan curve.

@patrike besides that I would suggest adding core voltage lock to NVIDIA clocking profiles. that should be easy to implement, with just one NvAPI call.

also I've found a bug with native OC on mixed AMD/NVIDIA rigs - in my case, when applying the profiles for AMD GPUs, some of them like fan speed, fan mode and power limit are applied to NVIDIAs as well.

Thank you I figured it was normal and I have been using AB just for the fan curve but hoping this can be addressed so we dont need AB. As for amd I notice odd behavior if using latest drivers and have resorted back to ONTool on those rigs. But my AMD w driver 18.6.1 seem good. thanks for clarification.

darkneorus

jr. member

Activity: 238

Merit: 3

Quote from: O-Coin on March 23, 2019, 11:19:01 AM

Quote from: trucobit on March 22, 2019, 05:59:47 AM

Quote from: O-Coin on March 21, 2019, 09:17:30 AM

NATIVE OverClocking NVIDIA
Driver Version 416.34

Anyone notice that while using this feature the gpu core will be throttled well before the fans move to 100%.
Example

Set Temp limit to 65c fan speed auto.
AM will maintain that temp.
Gpu Fan will speed will not go up to 100% because temp is maintained due to throttling Core.

If I move fan speed to 100% remove auto fan Gpu core goes back up and drastically improves hash rate. (20%-30% improvement)

Maybe Im missing something please let me know if I am.

AMD clocking is great because it has the fan target temp and temp Limit

I do not have that problem. Native OC is perfect for me.

What drivers are you using?

what are you describing is not a bug, it's meant to be that way with NVIDIA GPUs. the temp limit sets the max temperature for a GPU, after reaching that temp the core will throttle, but it does not affect the fan curve in any way. maybe some day Awesome Miner will have its own fan control with desired fan speed/temp tables or curves, but for now you should disable automatic fan speed and set your fans to 90-100%, or use MSI Afterburner to set your custom fan curve.

@patrike besides that I would suggest adding core voltage lock to NVIDIA clocking profiles. that should be easy to implement, with just one NvAPI call.

also I've found a bug with native OC on mixed AMD/NVIDIA rigs - in my case, when applying the profiles for AMD GPUs, some of them like fan speed, fan mode and power limit are applied to NVIDIAs as well.

O-Coin

jr. member

Activity: 61

Merit: 2

Quote from: trucobit on March 22, 2019, 05:59:47 AM

Quote from: O-Coin on March 21, 2019, 09:17:30 AM

NATIVE OverClocking NVIDIA
Driver Version 416.34

Anyone notice that while using this feature the gpu core will be throttled well before the fans move to 100%.
Example

Set Temp limit to 65c fan speed auto.
AM will maintain that temp.
Gpu Fan will speed will not go up to 100% because temp is maintained due to throttling Core.

If I move fan speed to 100% remove auto fan Gpu core goes back up and drastically improves hash rate. (20%-30% improvement)

Maybe Im missing something please let me know if I am.

AMD clocking is great because it has the fan target temp and temp Limit

I do not have that problem. Native OC is perfect for me.

What drivers are you using?

powerstr

newbie

Activity: 107

Merit: 0

http://prntscr.com/n1wdkr
I, too, can not understand why they both do not want to work

Siolim

newbie

Activity: 107

Merit: 0

Quote from: Siolim on March 23, 2019, 06:09:45 AM

Quote from: patrike on March 23, 2019, 02:47:50 AM

Quote from: Siolim on March 22, 2019, 07:02:26 PM

Quote from: patrike on March 22, 2019, 05:37:13 PM

Quote from: Siolim on March 21, 2019, 06:34:06 PM

Hi, Patrick. It seems that the www.coincalculators.io API signals have changed, all the numbers are not correct. Current Revenue (BTC / day) instead of USD

It's correct that there have been API changes and I've received information from the Coincalculators admin about the changes.

Right now you will run into problems if you use "CoinCalculators exchange rate" set to either Highest Bid or Lowest Ask, but from what I can see it should work better with Default.

I will adjust Awesome Miner to these changes.

It helped, but not for all coins.

Thanks for the update. Could you please give an example of a coin where it didn't work? Then I can verify the solution I'm preparing actually works for that one as well. Thanks!

Hello.
Coin SPK. but this is because of the price southXchange 0.22 .... BTC, with complexity normally
DIN also the price is not correct

Siolim

newbie

Activity: 107

Merit: 0

Quote from: patrike on March 23, 2019, 02:47:50 AM

Quote from: Siolim on March 22, 2019, 07:02:26 PM

Quote from: patrike on March 22, 2019, 05:37:13 PM

Quote from: Siolim on March 21, 2019, 06:34:06 PM

Hi, Patrick. It seems that the www.coincalculators.io API signals have changed, all the numbers are not correct. Current Revenue (BTC / day) instead of USD

It's correct that there have been API changes and I've received information from the Coincalculators admin about the changes.

Right now you will run into problems if you use "CoinCalculators exchange rate" set to either Highest Bid or Lowest Ask, but from what I can see it should work better with Default.

I will adjust Awesome Miner to these changes.

It helped, but not for all coins.

Thanks for the update. Could you please give an example of a coin where it didn't work? Then I can verify the solution I'm preparing actually works for that one as well. Thanks!

Hello.
Coin SPK. but this is because of the price southXchange 0.22 .... BTC, with complexity normally
DIN also the price is not correct
BZEdge

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 192. (Read 703563 times)