Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 230. (Read 703547 times)

need the "override config" like i can use at SRB also for JCE and other miners 

Test this one carefully. I update to this version and started getting a lot of miner crashes. I did not change anything else. I have reverted back to 0.8.9 for now and will wait for the next release.

...jim

Yes. I was actually having a discussion with the author of this service about two weeks ago. Once I get a chance I will look into it in more detail and it's for sure a feature candidate.

You have a Profit Factor setting for both a Pool and a Coin. I assume you ask about the Profit Factor for the Pool (please correct me if I misunderstood your question)?

The setting for the Coin is used by both the Coins tab and the Miners tab.

The setting for the Pool is only used on the Miners tab, not the Coins tab. The reason is that you can have two pools for the same coin, and these two pools can have different Profit Factors. For that reason it's not possible to say that the coin has a certain profit factor as it will depend on which of these pools you are actually mining on.

That's correct. For the mining software that are released on the official Github pages, Awesome Miner is simply linking to these download links.

The new T-rex link to be used is the following for example:
https://github.com/trexminer/T-Rex/releases/download/0.9.1/t-rex-0.9.1-win-cuda10.0.zip

It's only in the scenarios where mining software are released on Mega and similar sources where direct linking isn't available I put it on the Awesome Miner cloud file store and point Awesome Miner in that direction.

any possibility to add profitbotpro to statistic providers?

Hello @patrike another easy and useful suggestion.

I usually make measurements of how much a coin / pool yields. With which in the end I get a profit to vary in the currency pool in AM, I have from 0.80 to 1.30.

In the Miners tab, this is correctly reflected, the profit that shows is the one that estimates AM + my profit correction of the currency pool.

But in the Coins tab it does not reflect. If a two coins have a gain of 0.0020 but one has a profit of 0.80 and another of 1.10, it should show 0.0016 and the other 0.0022. In this way, by ordering the coins for profit, it will do so in a correct manner. Because in Coins it shows the profitability without modifying the profit stipulated by me. And sometimes it drives me crazy. Why does it change to this currency and not to this one? Sometimes it changes to the fourth most profitable currency instead of the third, and the reason is that it auto swicth if it is taken into account, but it is not shown in Coins. I hope it is understandable and that you see it logical, because for me it is.

GMiner v1.15 available for download

v1.15
+ added Equihash 150,5 algorithm (BEAM)

Performance on stock GPU settings:
Equihash 150,5:
MSI GTX 1080 SEA HAWK EK X 8GB ~10 Sol/s
EVGA GTX 1080 Ti Founders Edition 11GB ~17 Sol/s
Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~18 Sol/s

https://bitcointalksearch.org/topic/m.49103084

Bookmark this page:

https://github.com/trexminer/T-Rex/releases

That is the official release page. Right click the release you wish to use and copy the link address. Paste that into the custom field in Awesome Miner. That will be the link AM uses once it is updated.

You can do the same for Cryptodredge whenever they post a new release, at:

https://github.com/technobyl/CryptoDredge/releases

Don't forget to set the custom Folder name inside Zip-file for CryptoDredge as well.

Hope that helps,
...jim

Thanks for pointing me in the right direction. Got it figured out and working.

Much appreciated!
...jim

PAtrike can give us an url with the new t-rex 9.1, I do not trust other sources, so I can add custom.

Thanks for the advice. I added EnergiHash. Now I see the Energy Coin. Please add in next release.

trexminer/T-Rex
release 0.9.1 (https://github.com/trexminer/T-Rex/releases/tag/0.9.1)
Add algos: x16rt (Veil), sha256q (Pyrite)
 Minor performance improvements for x16r, bcd, x22i and other x16-like algorithms
 Multiple web monitoring page improvements
   Switch between multiple config files dynamically (put your .config files into the miner directory)
   Dark theme
 Linux watchdog is now available. Download at https://github.com/trexminer/T-Rex-Watchdog/releases

Bug fixes:

 cURL/SSL compatibility issue on newer Linux distros (Ubuntu 18, Debian 9)
 Miner wouldn't start if NVML wasn't installed

OK. So right now Awesome Miner doesn't have this algorithm predefined. I will add it to the next release.

If you manually add the algorithm "EnergiHash" in Awesome Miner, this coin will show up.

Awesome Miner version 6.0.10 (Development preview of 6.1)

 ASIC mining
  - Antminer S15 and DR5 supported for monitoring. Please note that these miners doesn't have SSH enabled making it impossible to use the feature to set Privileged API access.
 GPU mining
  - Awesome Miner can read and display the current power usage for both AMD and nVidia GPU's without any dependencies on mining software. Also used for the real time profit calculations and benchmarking.
  - GPU tab shows current power usage in the Performance column (previously called Speed).
  - GPU tab shows vendor name (Asus, MSI, EVGA, ...) for each GPU
  - Improved compatibility for reading nVidia GPU fan speed
 Features
  - Exchange filtering redesigned and can be configured both globally and per coin. Supported for CoinCalculators.io and CoinToMine
  - Note: Any previously specified exchange filter settings based on API string matching must be re-defined with the new filtering concept
  - Exchange volume filtering implemented for all coin statistics providers
  - The Coins tab will indicate the information that didn't pass the filter settings
  - Additional power usage and operating cost can be defined globally in the new Profitability section of the Options dialog. The values will affect the total power usage and profitability displayed on the dashboard and the total values in the miner column header.
  - Additional power usage and operating cost per miner can be defined in the Profit Profile. The values will reduce the profitability of a miner.
  - The Miner list shows power usage in the Performance column (previously called Speed).
  - New setting for power usage mode in the Options dialog, Profitability section. Configurable to use actual power usage (only for GPU, not ASIC), linear scaling or static values. Note: Linear power scaling is by default not used but can be enabled using this setting.
  - ZCoin block explorer for wallet balance
 API
  - Improved the HTTP API for coins with a new property to set the profit factor property
  - Improved the HTTP API for coins with a new property to set if the custom properties of a coin should be used
 User interface
  - The Coins & Profit section in the Options dialog has been split into two new sections - Profitability and Coins.
  - Coins with custom properties enabled will be highlighted in blue color on the Coins tab
  - Show up to 20 device temperatures in the Status column
  - Remove display of WU (Work Utility) for ASIC miners in the miner list as it's not relevant enough to display all the time. The value is still visible on the Summary tab.
 Mining software
  - Z-enemy Miner 1.28
  - T-Rex miner 0.8.9
  - Lolminer 0.6
  - NBMiner 12.2
  - Gminer Cuda Miner 1.14
  - WildRig Multi Miner 0.14 beta
  - CryptoDredge 0.16.0
  - BMiner 11.3, including dual mining of Ethereum and Tensority (BTM).
  - Claymore Dual Ethereum Miner 12.0
  - SRBMiner 1.7.5
 Corrections
  - More detailed error messages in the log file if MSI Afterburner Remote Server is returning a failure code
  - More fail safe pool processing when starting a Managed Profit Miner
  - Correction to GPU monitoring for Generic Miners running on Linux

The focus of this development release is the new Power Usage feature where Awesome Miner can show the current power usage for the GPU's. The GPU mapping must be enabled for Awesome Miner to display the additional GPU information:
https://support.awesomeminer.com/support/solutions/articles/35000086014-display-additional-gpu-information

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

To give an update on this topic - I've tested more with my nVidia 1050ti. It simply doesn't support getting the power usage.

I think Ccminer notice this as well and try to come up with a number that often is around 99W. Given that the card (at least my ASUS 1050ti) has a power limit of 95W it's not fully correct, but there are no perfect solution.

Awesome Miner will use a combination of the power limit and GPU utilization to estimate the power usage on these kind of GPU's that doesn't support power usage reporting. For the 1050ti the estimate will be around 93-94W when mining which is a bit higher than what I think it actually use, but it's an estimate better than showing 0W.

Almost all other GPU's support reporting power usage so this estimation will only be required in very few cases.

Enegi coin is it on coincalculators page....

Thanks. There will soon be a new development release of Awesome Miner where this CryptoDredge version will be included as well

CryptoDredge v0.16.0 released

* Add X16RT algorithm
* Add Lyra2zz (LAPO) algorithm
* Stabilize MTP algorithm
* Other minor fixes

Download: https://cryptodredge.org/#download
Mirror: https://github.com/technobyl/CryptoDredge/releases/tag/v0.16.0

recommended OS win 10 (1080ti and MTP)

I tested on version 6.0.9 on MTP and x16rt algorithms, everything works fine, you can add a new version

[/quote]
OK, I think I understand the scenario now. There are multiple exchanges for this coin and only one of them is showing incorrect exchange rate?

In the recent development releases of Awesome Miner, there is a feature to do Exchange Filtering. In the Coin Properties dialog you can also select exchanges to use for the specific coin. If one exchange is reporting bad values for a coin, you can select to use all exchanges except that one.
[/quote]

That is exactly the case, and I have filtered that exchange (also it was not 'active' because I had also filtered on low volume) but I wondered if it was being dealt with correctly (i.e. not using the 'default' exchange from ctm api). Thank you for taking a look!