[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 434.

crazydane

full member

Activity: 558

Merit: 194

Is it possible to configure an external managed profit miner running Linux (nvOC for example)?

I was hoping to at least be able to call scripts via ssh to change the "coin" on the nvOC rig and then restart the miner, but I'm not seeing how to do that.

I looked under rules and I don't see any triggers related to profit switching that would then allow me to create an action to ssh a "coin change" to a Linux miner.

Is there a trick I'm missing that allows this functionality?

Any plans for a remote agent for Linux?

So right now I'm just using AM to monitor my nvOC rigs, which is ok, but I was hoping for more. Also, I'm running DSTM 0.5.8 on the nvOC rigs with API/telemetry enabled, but all it is pulling back is very basic info about the GPU's on each rig. See below:

So I take it this is a limitation of DSTM?

Thanks

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: micwebnet on January 25, 2018, 11:47:35 PM

One of my Win10 mining machines stopped GPU mining and I went to check, to see why awesome miner didn't restart the GPU miner. Found the Claymore window in this state:

Code:

╔════════════════════════════════════════════════════════════════╗
║         Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ║
╚════════════════════════════════════════════════════════════════╝

XMR: 1 pool is specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 1
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
POOL version

and in Awesomeminer it says Interface offline. I have a rule to reset a miner that makes no progress:

* Triggeres: Accepted (3 minutes ago) Equals 0
* Actions: Restart miner

It never gets enacted. Miner is offline for hours. Requires me to manually hit Restart button on awesomeminer. What gives?

Using the Offline trigger is probably a better one to use for this situation.

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: CaribbeanD on January 26, 2018, 12:41:11 PM

After upgrading Awesome Miner this morning I am getting a Windows Defender message about Trojan:Win32/Azden.A!cl (severe) about Claymore's Dual Ethereum+Decred_Siacoin_Libry_Pasca+NVIDIA GPU miner v10.6/EthDcrMiner64.exe.tmp in my remote miner instance, Anyone else seeing this? and could it be a false positive?

I think I remember this in previous versions but I want to be sure before I allow it in.

Most mining software is going to throw AV warnings these days. Please follow this guide to make the exceptions on the AM folder to ignore them: http://awesomeminer.com/help/defender.aspx

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: Triangulum on January 26, 2018, 03:09:05 PM

Does anybody know how to make AwesomeMiner work with Claymore when -mpsw is set? After I set the -mpsw option, AwesomeMiner can no longer detect the miners and keep saying "Interface offline". Thanks in advance.

Why do you want to set a password on your monitoring port in Claymore? Isn't your rig behind a firewall?

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: tf2addict on January 26, 2018, 03:33:09 PM

I know how to create a rule to, for example, launch VNC on my host system and have it launch for a rig. But is there a way to create a rule that will execute an application on the rig itself instead of the AM host? I'm not seeing it unless I'm just missing it.

When you are setting up your rule, when you are setting up the Action: Run Executable section... there is a note at the bottom of the page that says to use the [Host] in the parameters. That should launch it on the remote system.

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: abdullahsurati on January 27, 2018, 02:03:17 AM

I have 6x1050 Ti build with Windows 10 Pro and Awesome Miner v4.2.3

I am mining ETH using MiningPoolHub Asia server with port 20536 and Claymore 10.2 Miner (Single mode only).

My overclocking settings are:
Power = 75%
Core = +150
Memory = +500
for all the 6 GPUs.

The problem I am facing is that whenever I start mining ETH with overclocking applied, the miner throws errors regarding GPU enable to start. The temporarily solution i have found is to start the miner on stock, and once the DAG is set for the GPUs, then overlock the GPUs. It works that way.

Can someone help me finding a permanent solution?

Thanks

Please upgrade your Awesome Miner, which will include a newer version of Claymore Etherium miner to version 10.6. Try that version to see if it helps your situation.

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: eminer001 on January 27, 2018, 09:42:22 AM

Where can we download and add to AM high performance miners like ccminer X17SPmod ?

if you go to http://www.zpool.ca/site/miners on most popular algos, like X17 and order by percent of used mining software, you will see that X17SPmod has the best HashRate and is used by 65% of top miners. next one is alexis with just 15%.

For NeoScrypt algo the best performance is from ccminer/8.18-KlausT and we can easily find it and integrate. Any idea why it is not included in AM ? Or how can we find and download all the other SP-mod ones, for the highest profit ?

Any ideea ?

As was mentioned by Mr. Spider most of the SP-Mod modified miners require you to pay him for it. Once you have your new mining software follow this guide:

http://awesomeminer.com/help/uploadsoftware.aspx

topgeek

member

Activity: 96

Merit: 10

Quote from: jasonjohnson99 on January 26, 2018, 11:07:12 PM

Quote from: topgeek on January 25, 2018, 07:43:34 PM

Here is the video:

https://www.youtube.com/watch?v=qG16ENVpQlg

p.s. @patrike I mentioned this bug on here a few months ago and haven't had any luck. It has spanned multiple versions of the software - both primary and the remote agent have been updated several times with the bug never going away.

Jeez...I have this right now too.. So bloody annoying! I want to clear out the hosts and create new ones. They are f'd up! Anyone know how to delete hosts? Haven't found a way yet. I was in the ConfigData.xml and found the hosts, I tried deleting them but they came back.

JJ

Hi JJ,

I'm curious as to what makes you think it is hosts related? I've tried mapping to IP addresses without using host names and it still does it.

Sorry that you have the same bug... fingers crossed Patrike can help

Mr.Spider703

member

Activity: 392

Merit: 27

http://radio.r41.ru

Quote from: eminer001 on January 27, 2018, 09:42:22 AM

Where can we download and add to AM high performance miners like ccminer X17SPmod ?

if you go to http://www.zpool.ca/site/miners on most popular algos, like X17 and order by percent of used mining software, you will see that X17SPmod has the best HashRate and is used by 65% of top miners. next one is alexis with just 15%.

For NeoScrypt algo the best performance is from ccminer/8.18-KlausT and we can easily find it and integrate. Any idea why it is not included in AM ? Or how can we find and download all the other SP-mod ones, for the highest profit ?

Any ideea ?

Sp_ sells his work, you need to write to him in the PM, pay 0.5 btc and you will receive updates on his mods

eminer001

newbie

Activity: 140

Merit: 0

Where can we download and add to AM high performance miners like ccminer X17SPmod ?

if you go to http://www.zpool.ca/site/miners on most popular algos, like X17 and order by percent of used mining software, you will see that X17SPmod has the best HashRate and is used by 65% of top miners. next one is alexis with just 15%.

For NeoScrypt algo the best performance is from ccminer/8.18-KlausT and we can easily find it and integrate. Any idea why it is not included in AM ? Or how can we find and download all the other SP-mod ones, for the highest profit ?

Any ideea ?

abdullahsurati

newbie

Activity: 66

Merit: 0

I have 6x1050 Ti build with Windows 10 Pro and Awesome Miner v4.2.3

I am mining ETH using MiningPoolHub Asia server with port 20536 and Claymore 10.2 Miner (Single mode only).

My overclocking settings are:
Power = 75%
Core = +150
Memory = +500
for all the 6 GPUs.

The problem I am facing is that whenever I start mining ETH with overclocking applied, the miner throws errors regarding GPU enable to start. The temporarily solution i have found is to start the miner on stock, and once the DAG is set for the GPUs, then overlock the GPUs. It works that way.

Can someone help me finding a permanent solution?

Thanks

jasonjohnson99

newbie

Activity: 12

Merit: 0

Quote from: topgeek on January 25, 2018, 07:43:34 PM

Hi Gents,

This bug is driving me nuts .... does anyone have any ideas?
It is really hard to explain so I made a video about it.

Here is the video:

https://www.youtube.com/watch?v=qG16ENVpQlg

Notes:
There is exact matching hardware in this miner as some other miners without the issue.
They all have unique IP addresses.
I've tried changing the IP address of Miner 4.
I've completely uninstalled and reinstalled the Awesome Miner remote agent countless times.
I've completely removed Miner4 from Awesome miner and re-added it from scratch multiple times with different names, etc.

Still the same results.
If I adjust any other miner or open any options menus... Miner 4 stops mining and has to be restarted.
Miner 4 won't start with the start button when this happens - I have to open its properties and click OK and then in starts again.

Please let me know if you have any thoughts.
Cheers,
Edwards

p.s. @patrike I mentioned this bug on here a few months ago and haven't had any luck. It has spanned multiple versions of the software - both primary and the remote agent have been updated several times with the bug never going away.

Jeez...I have this right now too.. So bloody annoying! I want to clear out the hosts and create new ones. They are f'd up! Anyone know how to delete hosts? Haven't found a way yet. I was in the ConfigData.xml and found the hosts, I tried deleting them but they came back.

JJ

brewlig

newbie

Activity: 7

Merit: 0

Quote from: Alex735566 on January 25, 2018, 01:48:43 PM

Who mines the mode cerrent or 24 hours?
look at what a big difference in the readings of the profits

24 hour
http://pixs.ru/showimage/Skrinshot2_3257073_29130100.png

setting
http://pixs.ru/showimage/Skrinshot2_6250106_29130122.png

current
http://pixs.ru/showimage/Skrinshot2_9443292_29130136.png

what are your settings?

Very interested in some information about this topic as well... Also, single dedicated pools and managing them in AM vs multi-algo pools

topgeek

member

Activity: 96

Merit: 10

I have tried many names for it... both in Awesome Miner and on the network.
I also tried connecting with the netbios name as well as the IP address (and manually tried different static IP address).

I have been in IT since 1994 and I have NO idea what is going on lol

The weird thing is all of the miners are configured the same way - static IP addresses etc... and one other miner is EXACTLY the same hardware.. and ONLY this one has the problem.

I am hoping Patrike knows whats triggering the remote agent .

Kronny

member

Activity: 137

Merit: 10

Quote from: topgeek on January 25, 2018, 07:43:34 PM

Hi Gents,

This bug is driving me nuts .... does anyone have any ideas?
It is really hard to explain so I made a video about it.

Here is the video:

https://www.youtube.com/watch?v=qG16ENVpQlg

Notes:
There is exact matching hardware in this miner as some other miners without the issue.
They all have unique IP addresses.
I've tried changing the IP address of Miner 4.
I've completely uninstalled and reinstalled the Awesome Miner remote agent countless times.
I've completely removed Miner4 from Awesome miner and re-added it from scratch multiple times with different names, etc.

Still the same results.
If I adjust any other miner or open any options menus... Miner 4 stops mining and has to be restarted.
Miner 4 won't start with the start button when this happens - I have to open its properties and click OK and then in starts again.

Please let me know if you have any thoughts.
Cheers,
Edwards

p.s. @patrike I mentioned this bug on here a few months ago and haven't had any luck. It has spanned multiple versions of the software - both primary and the remote agent have been updated several times with the bug never going away.

OMG it seems incredible Huh

have u try to change rig name? maybe "M4" is the problem Huh

tf2addict

full member

Activity: 675

Merit: 100

I know how to create a rule to, for example, launch VNC on my host system and have it launch for a rig. But is there a way to create a rule that will execute an application on the rig itself instead of the AM host? I'm not seeing it unless I'm just missing it.

Triangulum

newbie

Activity: 32

Merit: 0

Does anybody know how to make AwesomeMiner work with Claymore when -mpsw is set? After I set the -mpsw option, AwesomeMiner can no longer detect the miners and keep saying "Interface offline". Thanks in advance.

GPUaddict

newbie

Activity: 27

Merit: 0

Quote from: patrike on January 23, 2018, 05:15:44 PM

Quote from: GPUaddict on January 23, 2018, 11:55:23 AM

Hey guys!

Thank you very much for creating AM! I'm currently using it on all my 3x6 rigs now.

I would like to invest further in the software. Just wanted to confirm a few things from those who already have version beyond the free one.

1. If I upgrade, would I be able to manage all 3-6 rigs for example from 1 rig that I use as my main?
2. How do I get the most of the "Balance" page in the GUI?
3. Would more pools be added in the profile switching section later on or is this something I can do on my own via the customs pools? I understand I can mine specific coins via the customs pool as I already tried this with a few coins in the past.
4. I use nvidia gpu's. If I mine via dstm and ccminer in the profiles, I get errors that the rm.exe file needs reinstalling for dstm and ccminer crashes. This only happens to 1 or the rigs. Would anyone be kind enough to point me in the right direction as to how I can fix this?
5. Are there any tips as to how I can stabilize settings so that my current AM doesn't restart miner after a few mins? I've double checked on my rules and they're conservative enough to wait for progress and such. I'm not pushing the gpu's so much too. On one of my rigs which have the same settings, I can get 8hours straight of uninterrupted mining.

Thank you!

Hi and thanks for your nice feedback.

1) The best deployment is to run Awesome Miner on a separate computer, but it also works fine to run it on one of your miners. Then you install Remote Agent on all other mining rigs. The single Awesome Miner instance will let you manage and monitor the mining of all your mining rigs in a single user interface

2) Please note that this feature is only about balance of public wallet addresses, not your pool current pool balance (yet). For details, please see:
http://awesomeminer.com/help/coinbalance.aspx

3) I try to have the most popular pools as predefined, but I will never be able to include everything. You can add your own custom pools to the profit switcher as well.

4 - 5) Do you get any output if you click the Diagnostics button in Awesome Miner, or are these softwares crashing right away without any additional information? This issue is probably outside the scope of Awesome Miner. You can also find the general troubleshooting tips here:
http://awesomeminer.com/help/troubleshooting-gpu.aspx

Hi patrike! Thank you for taking time out to point me in the right direction for troubleshooting. I will check out those links and will do the diagnostics again. I did run that before but I didn't see any weird errors except for the process closing.

With regard to the ccminer for certain coins, they just close right away and seem to not open. This is during benchmarking. I will try with diagnostics then.

Thank you!

GPUaddict

newbie

Activity: 27

Merit: 0

Quote from: puwaha on January 24, 2018, 12:22:18 AM

Quote from: GPUaddict on January 23, 2018, 11:55:23 AM

4. I use nvidia gpu's. If I mine via dstm and ccminer in the profiles, I get errors that the rm.exe file needs reinstalling for dstm and ccminer crashes. This only happens to 1 or the rigs. Would anyone be kind enough to point me in the right direction as to how I can fix this?

Patrike answered most of your questions, but I know that DSTM needs the Visual C++ 2015 redistributable installed to work properly. Please try this and then try DSTM again.

Quote

5. Are there any tips as to how I can stabilize settings so that my current AM doesn't restart miner after a few mins? I've double checked on my rules and they're conservative enough to wait for progress and such. I'm not pushing the gpu's so much too. On one of my rigs which have the same settings, I can get 8hours straight of uninterrupted mining.

Thank you!

What is causing the restart? Is it the lack of accepted shares after 8 minutes (I think this is a default rule?) What algo is it mining when this happens? What software is running when this happens? What kind of GPUs are you using? What kind of over/underclocks are you using?

Hi puwaha! Thank you for your inputs! I've re-inputted the defaults and the restarting happens very much less than before. I can mine now for 7hours above.

I do recall doing the update on the visual c already but will do it again for good measure. Yes, that should solve it as I recall doing all that with the other rigs.

Maltaman

newbie

Activity: 5

Merit: 0

Quote from: CaribbeanD on January 26, 2018, 12:41:11 PM

After upgrading Awesome Miner this morning I am getting a Windows Defender message about Trojan:Win32/Azden.A!cl (severe) about Claymore's Dual Ethereum+Decred_Siacoin_Libry_Pasca+NVIDIA GPU miner v10.6/EthDcrMiner64.exe.tmp in my remote miner instance, Anyone else seeing this? and could it be a false positive?

The same ;-)
file: C:\....\AwesomeMinerService\EthDcrMiner64_1\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v10.6\EthDcrMiner64.exe
Trojan:Win32/Azden.A!cl

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 434. (Read 703583 times)