Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 453. (Read 703583 times)
January 11, 2018, 08:52:47 PM
And another profit switching question: Why are some algos not available to benchmark for my AMD miner softwares? For example Tribus is not available even though it is selected as an available algo in the Coins-Algorithms options. Tribus IS available for Nvidia benchmarking. sgminer supports Tribus AFAIK so why isn't it available to benchmark?
January 11, 2018, 08:45:19 PM
I'm just getting into the profit switching stuff and have a question: is it possible to configure AM to use the BTC payout option on zpool for all coins except for one or two where I would set it to pay out in that coin instead of BTC? There are one or two coins I want to get paid in but the rest I just want to get paid in BTC. Based on what I've seen so far in the AM options screens I think it's all or nothing, right?
January 11, 2018, 08:13:12 PM
no, it's calculated to 0.00 for the details which is why it's not working.
yes, there are valid pools for it added to the pool group used by the profit miner for profit switching.
and obviously the profit profile has a hash rate and the algo enabled or it wouldn't be on the coins tab for that profile.
I have the same problem with Aeon where the json from whattomine works...but somehow the conversion rate goes whacky, fiddling with profit factor but it's not a simple GHs / MHs conversion but something like 3000000 times to make it closer to what it should be....in the end i gave up since my rigs are mostly nvidia and old cpu, cryptonight isn't their strong points ;p
if your issue is similarly related and the coin is something you really want to mine, maybe ask Patrike if he can look into it.
it's for intensecoin and shield. I just set up manual miners for them but it's annoying i have to buy a '20 miner license' to mine on 6 rigs because each one needs a stack of manual miners since there's no way to get the profit miner to lock onto a certain coin temporarily or any way to switch coins with a single click unless you have a bunch of different miners set up in advance.
January 11, 2018, 08:00:44 PM
no, it's calculated to 0.00 for the details which is why it's not working.
yes, there are valid pools for it added to the pool group used by the profit miner for profit switching.
and obviously the profit profile has a hash rate and the algo enabled or it wouldn't be on the coins tab for that profile.
I have the same problem with Aeon where the json from whattomine works...but somehow the conversion rate goes whacky, fiddling with profit factor but it's not a simple GHs / MHs conversion but something like 3000000 times to make it closer to what it should be....in the end i gave up since my rigs are mostly nvidia and old cpu, cryptonight isn't their strong points ;p
if your issue is similarly related and the coin is something you really want to mine, maybe ask Patrike if he can look into it.
January 11, 2018, 07:21:05 PM
Is profit switching supposed to ignore user-defined coins? It always calculates them as $0.00 even though they are the most profitable on the coins tab for the same profit profile 
Does right click miner -> View Details show that coin is also on top of the Profit switching tab?
Which coin is that, do you have pools that support the user defined coin setup?
no, it's calculated to 0.00 for the details which is why it's not working.
yes, there are valid pools for it added to the pool group used by the profit miner for profit switching.
and obviously the profit profile has a hash rate and the algo enabled or it wouldn't be on the coins tab for that profile.
January 11, 2018, 06:36:59 PM
Is profit switching supposed to ignore user-defined coins? It always calculates them as $0.00 even though they are the most profitable on the coins tab for the same profit profile
Does right click miner -> View Details show that coin is also on top of the Profit switching tab?
Which coin is that, do you have pools that support the user defined coin setup?
January 11, 2018, 06:25:36 PM
Is profit switching supposed to ignore user-defined coins? It always calculates them as $0.00 even though they are the most profitable on the coins tab for the same profit profile
January 11, 2018, 06:18:45 PM
So now I have setup changing of gpu profiles when changing algos, and it works like a charm! 
However, only when I have 10 cards or less, this seems to be the limit afterburner service? :/. The afterburner software gui actually only lets you control 8, but the afterburner remote server worked like a charm with 10 when controlling from Awesome Miner. When I added 2 more cards it does not work anymore, the 2 last cards is not updated to the profile set for the other 10. Is there any solution for this? I am now using Asus gpu tweak II manually, and can control 12 cards there. Is there a way to remote this one?
My main problem seems to especially the Equihash-miners requires more conservative clockings than for instance Skein or Lyra2v2. (my cards are 1080ti and those algos have been the most common for me so far running on multipoolhub). So if I want the auto changing of algos I need to use conservative clocking for all algos atm..
However, only when I have 10 cards or less, this seems to be the limit afterburner service? :/. The afterburner software gui actually only lets you control 8, but the afterburner remote server worked like a charm with 10 when controlling from Awesome Miner. When I added 2 more cards it does not work anymore, the 2 last cards is not updated to the profile set for the other 10. Is there any solution for this? I am now using Asus gpu tweak II manually, and can control 12 cards there. Is there a way to remote this one? My main problem seems to especially the Equihash-miners requires more conservative clockings than for instance Skein or Lyra2v2. (my cards are 1080ti and those algos have been the most common for me so far running on multipoolhub). So if I want the auto changing of algos I need to use conservative clocking for all algos atm..
When was last time you updated Afterburner. The one release about a month ago suposedly fixed the 10GPU limit it was having. At least according to the release notes for the version.
afterburner devs are a bunch of miner hating tools. they probably stopped it from crashing, no way they spend 5 minutes updating the gui. go read their forum and responses to people asking for that.
https://forums.guru3d.com/threads/afterburner-can-only-list-up-to-8-gpu.417395/
when I upgraded awesome miner to support 'overclocking' i was severely disappointed it tries to use afterburner to achieve this. Latest afterburner can't even see my Radeon RX GPUs with the latest AMD driver.
January 11, 2018, 06:07:41 PM
@Patrike - Feature Suggestion
Can you add logic to detect when the currently mining coin/algo has dropped X% below whatever is currently at the top of the profit list? I have 30 min switching setup, but often coins/algo's are only profitable for a few minutes then drop waaaaaaaaay down the list, mining unprofitably for most of the time. It would be AWESOME for AwesomeMiner to detect this automatically and initiate a switch.
Thank you!
Can you add logic to detect when the currently mining coin/algo has dropped X% below whatever is currently at the top of the profit list? I have 30 min switching setup, but often coins/algo's are only profitable for a few minutes then drop waaaaaaaaay down the list, mining unprofitably for most of the time. It would be AWESOME for AwesomeMiner to detect this automatically and initiate a switch.
Thank you!
January 11, 2018, 05:39:24 PM
I'm having problems trying to list the GPUs in the correct order in Awesome Miner so they match the order on the miner (in this case Zecminer). I've tried all sorts of configurations in the 'Map to system monitoring' screen but I just can't get it to work.
Is there a trick to getting it right?!
Is there a trick to getting it right?!
January 11, 2018, 05:11:40 PM
So now I have setup changing of gpu profiles when changing algos, and it works like a charm! However, only when I have 10 cards or less, this seems to be the limit afterburner service? :/. The afterburner software gui actually only lets you control 8, but the afterburner remote server worked like a charm with 10 when controlling from Awesome Miner. When I added 2 more cards it does not work anymore, the 2 last cards is not updated to the profile set for the other 10. Is there any solution for this? I am now using Asus gpu tweak II manually, and can control 12 cards there. Is there a way to remote this one?
My main problem seems to especially the Equihash-miners requires more conservative clockings than for instance Skein or Lyra2v2. (my cards are 1080ti and those algos have been the most common for me so far running on multipoolhub). So if I want the auto changing of algos I need to use conservative clocking for all algos atm..
However, only when I have 10 cards or less, this seems to be the limit afterburner service? :/. The afterburner software gui actually only lets you control 8, but the afterburner remote server worked like a charm with 10 when controlling from Awesome Miner. When I added 2 more cards it does not work anymore, the 2 last cards is not updated to the profile set for the other 10. Is there any solution for this? I am now using Asus gpu tweak II manually, and can control 12 cards there. Is there a way to remote this one? My main problem seems to especially the Equihash-miners requires more conservative clockings than for instance Skein or Lyra2v2. (my cards are 1080ti and those algos have been the most common for me so far running on multipoolhub). So if I want the auto changing of algos I need to use conservative clocking for all algos atm..
When was last time you updated Afterburner. The one release about a month ago suposedly fixed the 10GPU limit it was having. At least according to the release notes for the version.
January 11, 2018, 04:48:39 PM
Apologies for the possible newbie question, but after changing to Profit mining my remote services won't restart even when the "Auto restart miner" option is checked in the "Managed Profit Miner Properties".
Another odd thing I've noticed is, as soon as I start one of the miners the other stops!!!
Any ideas? -
thanks in advance
Another odd thing I've noticed is, as soon as I start one of the miners the other stops!!!
Any ideas? -
thanks in advance
January 11, 2018, 04:32:41 PM
So now I have setup changing of gpu profiles when changing algos, and it works like a charm! However, only when I have 10 cards or less, this seems to be the limit afterburner service? :/. The afterburner software gui actually only lets you control 8, but the afterburner remote server worked like a charm with 10 when controlling from Awesome Miner. When I added 2 more cards it does not work anymore, the 2 last cards is not updated to the profile set for the other 10. Is there any solution for this? I am now using Asus gpu tweak II manually, and can control 12 cards there. Is there a way to remote this one?
My main problem seems to especially the Equihash-miners requires more conservative clockings than for instance Skein or Lyra2v2. (my cards are 1080ti and those algos have been the most common for me so far running on multipoolhub). So if I want the auto changing of algos I need to use conservative clocking for all algos atm..
However, only when I have 10 cards or less, this seems to be the limit afterburner service? :/. The afterburner software gui actually only lets you control 8, but the afterburner remote server worked like a charm with 10 when controlling from Awesome Miner. When I added 2 more cards it does not work anymore, the 2 last cards is not updated to the profile set for the other 10. Is there any solution for this? I am now using Asus gpu tweak II manually, and can control 12 cards there. Is there a way to remote this one? My main problem seems to especially the Equihash-miners requires more conservative clockings than for instance Skein or Lyra2v2. (my cards are 1080ti and those algos have been the most common for me so far running on multipoolhub). So if I want the auto changing of algos I need to use conservative clocking for all algos atm..
January 11, 2018, 02:23:29 PM
A bit confusing question
I've got two licences Pro and Premium
Is there any chance to combine them add extra $$$ and get enterprise or even ultimate for 100 miners?
the thing is that I'm combining my farms and no longer require different instances of licensing
I've got two licences Pro and Premium
Is there any chance to combine them add extra $$$ and get enterprise or even ultimate for 100 miners?
the thing is that I'm combining my farms and no longer require different instances of licensing
I would contact them via their website to see if they can work out a deal for you.
January 11, 2018, 01:41:20 PM
A bit confusing question
I've got two licences Pro and Premium
Is there any chance to combine them add extra $$$ and get enterprise or even ultimate for 100 miners?
the thing is that I'm combining my farms and no longer require different instances of licensing
I've got two licences Pro and Premium
Is there any chance to combine them add extra $$$ and get enterprise or even ultimate for 100 miners?
the thing is that I'm combining my farms and no longer require different instances of licensing
January 11, 2018, 01:04:43 PM
I get "interface offline" with 12 AMD cards on a B250 Expert.
I have 12 Nvidia on an H110 and there Interface works
It's hard when you do not see if the program earns money or not
I have tried everything but nothing helps.
I have 12 Nvidia on an H110 and there Interface works
It's hard when you do not see if the program earns money or not
I have tried everything but nothing helps.
January 11, 2018, 12:22:55 PM
I'm having some weird stuff happening with ahashpool and CCminer2.2.4, it starts up and the closes immediately, the diagnostic tool states the config might be wrong? I'm trying with all default settings, just added my bitcoin wallet in. Anyone else having this problem?
Make sure you exclude the awesomeminer folders in windows defender.
Also look at the bottom right "Action Center" of windows and see if there is a message.
http://www.awesomeminer.com/help/defender.aspx
yep did all that
, just me not looking at what graphics driver version I was using 
Thx!
January 11, 2018, 12:17:12 PM
I'm having some weird stuff happening with ahashpool and CCminer2.2.4, it starts up and the closes immediately, the diagnostic tool states the config might be wrong? I'm trying with all default settings, just added my bitcoin wallet in. Anyone else having this problem?
Make sure you exclude the awesomeminer folders in windows defender.
Also look at the bottom right "Action Center" of windows and see if there is a message.
http://www.awesomeminer.com/help/defender.aspx
January 11, 2018, 12:11:38 PM
The drawback is that it's more intended for coin properties based on difficult and similar parameters.
Sometimes it's easier to just set profitability in BTC per MH/s, and I can implement that for you over the HTTP API in the next release if needed. It could be something like:
POST /api/coins/LTC?profit=0.000014
HTTP API access for this would be great though, I would love to write an external program to gather bleeding edge coins and update them in AM.
I will add the HTTP API in the next release.
While you're at it, can you make *ALL* coin info available via the API? It would be nice to query AM for coin prices instead of writing more of my own stuff. I'm working on AM plugins at the moment and would like to use its features as much as possible. Sometimes it's easier to just set profitability in BTC per MH/s, and I can implement that for you over the HTTP API in the next release if needed. It could be something like:
POST /api/coins/LTC?profit=0.000014
HTTP API access for this would be great though, I would love to write an external program to gather bleeding edge coins and update them in AM.
I will add the HTTP API in the next release.
January 11, 2018, 12:08:20 PM
I'm having some weird stuff happening with ahashpool and CCminer2.2.4, it starts up and the closes immediately, the diagnostic tool states the config might be wrong? I'm trying with all default settings, just added my bitcoin wallet in. Anyone else having this problem?
Stupid me again, thought the nvidia drivers auto updated already, using an older driver so it didn't have cuda 9.0 lol
Stupid me again, thought the nvidia drivers auto updated already, using an older driver so it didn't have cuda 9.0 lol
Jump to: