[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 451.

puch0021

newbie

Activity: 35

Merit: 0

Quote from: wildzer0 on January 13, 2018, 02:56:51 PM

Has anyone successfully added the PHI1612 algorithm? No matter what I do, it always shows up as 0,00 € when I view the miner details.

I did:

- Add PHI1612 algorithm
- Enable PHI1612 for ccminer
- Add AHashPool entry for it
- Add LuxCoin json

I can benchmark the algorithm and have saved my hashrate. It also shows up correctly in the "Online services" section with realistic looking profit values. LuxCoin also shows up in the "Coins" section. However, when viewing the miner details it's always fixed at 0,00 €, so never gets chosen. In previous versions I added Lyra2z manually and everything worked fine there...

Make sure under the online services you have the correct profile selected. I originally had it on default and phi would show 0.00 (but view details on the miner itself would show a profit calculation and actual profits for phi) and then selected nvidia, phi appeared.

I know its the opposite of your problem but worth a shot to see if it fixes it for you.

millsys

member

Activity: 112

Merit: 10

Quote from: iceTony on January 13, 2018, 05:43:59 PM

Hello, miners! I have one problem with Awesome miner. When i use it on local pc i can see interface with gpu, mh/s etc.. But other machines on local network show interface offline. For another machines i use "Specify existing installation path". Cant use "automatic download" because "o connection could be made because the target machine actively refused it 127.0.0.1:4028". What im doing wrong ?

check virus scanner or firewall on miner.. Recommend disabling both

iceTony

copper member

Activity: 30

Merit: 0

Hello, miners! I have one problem with Awesome miner. When i use it on local pc i can see interface with gpu, mh/s etc.. But other machines on local network show interface offline. For another machines i use "Specify existing installation path". Cant use "automatic download" because "o connection could be made because the target machine actively refused it 127.0.0.1:4028". What im doing wrong ?

CreamyG31337

member

Activity: 113

Merit: 10

Quote from: wildzer0 on January 13, 2018, 02:56:51 PM

Has anyone successfully added the PHI1612 algorithm? No matter what I do, it always shows up as 0,00 € when I view the miner details.

I did:

- Add PHI1612 algorithm
- Enable PHI1612 for ccminer
- Add AHashPool entry for it
- Add LuxCoin json

I can benchmark the algorithm and have saved my hashrate. It also shows up correctly in the "Online services" section with realistic looking profit values. LuxCoin also shows up in the "Coins" section. However, when viewing the miner details it's always fixed at 0,00 €, so never gets chosen. In previous versions I added Lyra2z manually and everything worked fine there...

Works fine for me. Try restarting awesome miner.
Nothing I do will get intensecoin or shield to work with the profit switching. Those are user-defined coins. I think there's some bugs here, but it's tough to get any support.

Try this maybe? https://bitcointalksearch.org/topic/m.27560431
add as PHI1612 and make sure the user defined command line argument is just 'phi'
That's how I have it and it's working.
Add TimeTravel10 as 'bitcore' while you're there.

wildzer0

newbie

Activity: 28

Merit: 0

Has anyone successfully added the PHI1612 algorithm? No matter what I do, it always shows up as 0,00 € when I view the miner details.

I did:

- Add PHI1612 algorithm
- Enable PHI1612 for ccminer
- Add AHashPool entry for it
- Add LuxCoin json

I can benchmark the algorithm and have saved my hashrate. It also shows up correctly in the "Online services" section with realistic looking profit values. LuxCoin also shows up in the "Coins" section. However, when viewing the miner details it's always fixed at 0,00 €, so never gets chosen. In previous versions I added Lyra2z manually and everything worked fine there...

sergw

member

Activity: 159

Merit: 12

Hi guys, please help me: how may i see Antminer S9 each chip hashrate and fan speed on the same page on Miners tab, is it possible?

tried to check http://www.awesomeminer.com/help/customizefield.aspx but cannot find fan speed and each chip hashrate there

PowerByRS

newbie

Activity: 1

Merit: 0

jungleRogi

newbie

Activity: 3

Merit: 0

Quote from: Razor1 on January 12, 2018, 07:49:14 PM

Quote from: jungleRogi on January 12, 2018, 03:58:09 PM

Quote from: Razor1 on January 11, 2018, 12:22:55 PM

Quote from: cashen on January 11, 2018, 12:17:12 PM

Quote from: Razor1 on January 11, 2018, 12:08:20 PM

I'm having some weird stuff happening with ahashpool and CCminer2.2.4, it starts up and the closes immediately, the diagnostic tool states the config might be wrong? I'm trying with all default settings, just added my bitcoin wallet in. Anyone else having this problem?

Make sure you exclude the awesomeminer folders in windows defender.

Also look at the bottom right "Action Center" of windows and see if there is a message.

http://www.awesomeminer.com/help/defender.aspx

yep did all that

, just me not looking at what graphics driver version I was using Wink

Thx!

Did you find the sollution im having te same problem.

Thanks in advance!!

I was using a pre 184 driver, CCminer 2.2.3 and up needs CUDA 9 which comes with 184 and after drivers.

Thx m8 this was the solution apparently installing the drivers with the .exe didn't work but i updated with the devices settings.

iceTony

copper member

Activity: 30

Merit: 0

Hello, miners! I have one problem with Awesome miner. When i use it on local pc i can see interface with gpu, mh/s etc.. But other machines on local network show interface offline. For another machines i use "Specify existing installation path". Cant use "automatic download" because "o connection could be made because the target machine actively refused it 127.0.0.1:4028". What im doing wrong ?

millsys

member

Activity: 112

Merit: 10

Quote from: BinaryCrypto on January 12, 2018, 10:26:40 PM

I keep having a problem where the miner stops. It seems to always be ccminer. The other miners that Awesome Miner uses don't seem to do this. Not sure if it's an issue with ccminer or with Awesome Miner (in regards to the parameters or build it uses).

Sometimes it will start after a profit switch cycle and then nothing happens. It will shows the first few lines of the miner running with no errors but nothing after that as if it waiting for something. This last time it was running find and it showed it had accepted 44/44 blocks but then it stopped for a long time. You can see before that 42/44, 43/44, etc.

Is it possible there is nothing else to mine (i.e.: issue with MiningPoolHub?). Shouldn't it pull something else at that point? Not sure what the X or X (X/X) denotes.

Earlier today as well, I don't remember what was on the screen but it had been sitting there doing nothing for who knows how long. The GPU was at 1% so I know it wasn't mining anything.

Soon as I stop and restart the miner, it starts working fine again.

Run GPEDIT
computer/administrative/windows components/Windows Error Reporting
Display Error Notification : DISABLE
Disable Windows Error Reporting : ENABLE
Prevent display of the user interface for critical errors : Enable
Disable Logging : Enable

Close and reboot

Try 80% power, +100 cpu, +500 mem

pythus24

newbie

Activity: 5

Merit: 0

Quote from: thucar on January 12, 2018, 11:21:56 PM

I've been using AM for a month now and I'm absolutely loving it. However, after the latest update (v4.3.2) my miners restart very often. Their Uptimes used to be in hours and even days, whereas now it's a rare occasion to see them reach one full hour.

Specifics:
Running Profit Miners with MPH as the only pool selected. Only allowing two algo's(cryptonight and equihash) And it's not that they would switch between the algos when they restart. They just stop mining Equihash and then start at it again.

I'm facing the same problem, but for me the miners restart exactly every 2.5 minutes and it would happen to all running miners at the same time (GPU and CPU). It's like something is forcing the miners to restart.

Profit switching still works though at the interval that I have set. So the restarts every 2.5 minutes is not due to switching to a different algorithm.

Even with profit switching is off and miners setup to mine one coin only, it would behave the same way.

Razor1

newbie

Activity: 22

Merit: 0

Quote from: BinaryCrypto on January 12, 2018, 10:26:40 PM

I keep having a problem where the miner stops. It seems to always be ccminer. The other miners that Awesome Miner uses don't seem to do this. Not sure if it's an issue with ccminer or with Awesome Miner (in regards to the parameters or build it uses).

Sometimes it will start after a profit switch cycle and then nothing happens. It will shows the first few lines of the miner running with no errors but nothing after that as if it waiting for something. This last time it was running find and it showed it had accepted 44/44 blocks but then it stopped for a long time. You can see before that 42/44, 43/44, etc.

Is it possible there is nothing else to mine (i.e.: issue with MiningPoolHub?). Shouldn't it pull something else at that point? Not sure what the X or X (X/X) denotes.

Earlier today as well, I don't remember what was on the screen but it had been sitting there doing nothing for who knows how long. The GPU was at 1% so I know it wasn't mining anything.

Soon as I stop and restart the miner, it starts working fine again.

I have noticed this too with ccminer, I think it does have some stability issues. And its specific to which coins too, switching from and going to. I haven't had time to track it down but at a glance I think it is when its going from nist5 to another coin. Oddly enough it only happens with 2 of my rigs out of 73 rigs. Its not overclocking, memory or undervolting related. Tried all different options with it, just those two rigs, screw up ever now and then.

thucar

newbie

Activity: 8

Merit: 0

I've been using AM for a month now and I'm absolutely loving it. However, after the latest update (v4.3.2) my miners restart very often. Their Uptimes used to be in hours and even days, whereas now it's a rare occasion to see them reach one full hour.

Specifics:
Running Profit Miners with MPH as the only pool selected. Only allowing two algo's(cryptonight and equihash) And it's not that they would switch between the algos when they restart. They just stop mining Equihash and then start at it again.

BinaryCrypto

newbie

Activity: 7

Merit: 0

I keep having a problem where the miner stops. It seems to always be ccminer. The other miners that Awesome Miner uses don't seem to do this. Not sure if it's an issue with ccminer or with Awesome Miner (in regards to the parameters or build it uses).

Sometimes it will start after a profit switch cycle and then nothing happens. It will shows the first few lines of the miner running with no errors but nothing after that as if it waiting for something. This last time it was running find and it showed it had accepted 44/44 blocks but then it stopped for a long time. You can see before that 42/44, 43/44, etc.

Is it possible there is nothing else to mine (i.e.: issue with MiningPoolHub?). Shouldn't it pull something else at that point? Not sure what the X or X (X/X) denotes.

Earlier today as well, I don't remember what was on the screen but it had been sitting there doing nothing for who knows how long. The GPU was at 1% so I know it wasn't mining anything.

Soon as I stop and restart the miner, it starts working fine again.

Razor1

newbie

Activity: 22

Merit: 0

Quote from: tf2addict on January 12, 2018, 04:32:36 PM

Something really odd with the profit calculation goes on sometimes. For example right now in the Miners window it's showing a profit of $7 per day for Tribus but when I view details it shows $73 per day! Other times they almost match. What would cause that? I realize the miner's view uses actual hash rate and the details uses the benchmarked rate, right?

It is correct, these coins are highly volatile, the mining pool makes money on the volatility as do you, so lets say you mine at 73 per day if you have a mining hash rate of 100%, which never happens, and mine Tribis, the pool will sell the tribis you mined once it reaches that mark again, this is what the coin maturity is all about. That 73 bucks a day will only be there for a few minutes, this is why I set my autoswitching to 5 minutes. This might not work well for system that use many many cards, as it needs more system ram for this (or virtual memory). Miner crashes can occur, but the nice thing about Awesome miner is it will restart a miner if it crashes.

Razor1

newbie

Activity: 22

Merit: 0

Quote from: jungleRogi on January 12, 2018, 03:58:09 PM

Quote from: Razor1 on January 11, 2018, 12:22:55 PM

Quote from: cashen on January 11, 2018, 12:17:12 PM

Quote from: Razor1 on January 11, 2018, 12:08:20 PM

I'm having some weird stuff happening with ahashpool and CCminer2.2.4, it starts up and the closes immediately, the diagnostic tool states the config might be wrong? I'm trying with all default settings, just added my bitcoin wallet in. Anyone else having this problem?

Make sure you exclude the awesomeminer folders in windows defender.

Also look at the bottom right "Action Center" of windows and see if there is a message.

http://www.awesomeminer.com/help/defender.aspx

yep did all that

, just me not looking at what graphics driver version I was using Wink

Thx!

Did you find the sollution im having te same problem.

Thanks in advance!!

I was using a pre 184 driver, CCminer 2.2.3 and up needs CUDA 9 which comes with 184 and after drivers.

tf2addict

full member

Activity: 675

Merit: 100

Something really odd with the profit calculation goes on sometimes. For example right now in the Miners window it's showing a profit of $7 per day for Tribus but when I view details it shows $73 per day! Other times they almost match. What would cause that? I realize the miner's view uses actual hash rate and the details uses the benchmarked rate, right?

Dalba

newbie

Activity: 92

Merit: 0

Hello,
I must do something wrong with adding coin from whattomine...
I want to add Bitsend to the listed coins. What i did :
- Be sure Xevan algorithm is in latest AM --> OK
- Added http://whattomine.com/coins/201.json in the list in Statistics --> OK

On Whattomine website, coin is marked as "Active".
When i click "update" in coins tab, nothing ! I tried quit AM and launch again, still nothing...
What am I missing ?

jungleRogi

newbie

Activity: 3

Merit: 0

Quote from: Razor1 on January 11, 2018, 12:22:55 PM

Quote from: cashen on January 11, 2018, 12:17:12 PM

Quote from: Razor1 on January 11, 2018, 12:08:20 PM

I'm having some weird stuff happening with ahashpool and CCminer2.2.4, it starts up and the closes immediately, the diagnostic tool states the config might be wrong? I'm trying with all default settings, just added my bitcoin wallet in. Anyone else having this problem?

Make sure you exclude the awesomeminer folders in windows defender.

Also look at the bottom right "Action Center" of windows and see if there is a message.

http://www.awesomeminer.com/help/defender.aspx

yep did all that

, just me not looking at what graphics driver version I was using Wink

Thx!

Did you find the sollution im having te same problem.

Thanks in advance!!

trooperx

newbie

Activity: 18

Merit: 0

Quote from: trooperx on January 12, 2018, 01:22:57 PM

I've set up a managed miner for cast-xmr and put the pool and wallet address in the pool configuration. But when I start the miner it says no pool is defined. Does it not pick the details up from the pool config for cast-xmr?

Nevermind, I've worked it out. The wallet address needs to be in the user field.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 451. (Read 703113 times)