Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 454. (Read 703113 times)
January 10, 2018, 09:39:08 PM
I've been setting up rigs for people and taking a small cut for management. Say I want to collect this by turning the rigs over to my wallet one day a week. Is there any way to automate this - for example every sunday it mines to my wallet on zpool, every other day it mines whatever is most profitable to his wallet(s)?
January 10, 2018, 06:24:21 PM
I am using the default settings... Switching interval is 30 minutes... Threshold is unchecked.
However an update:
Suddenly my auto-exchange coin target (ethereum) balance jumped up and now my total looks more correct for the 24 hour period ($~7.00).
They must be using some kind of server farm (NoSQL DB setup perhaps) where depending on which server you are hitting at the time, you see different totals. Then at some point they must consolidate. Really wish they would improve the UI however.
at MPH it's hard to consolidate earnings especially when using the AutoExchange feature, the constant shuffling funds to and fro, the delays + exchange wallet maintenance cause lots of ppl to freak out. Glad you are seeing consistent stats now
January 10, 2018, 06:10:45 PM
hsrminer support pls
I think hsrminer don't have an api yet (it's planned but palginpav said he's trying to port algos first I believe), you should be able to set it up as generic miner, just that it won't feed any info back with no api so manual bench is needed.
January 10, 2018, 05:45:17 PM
What is your profit switching setting, statistics to 24 hours? Long switch intervals? Switching threshold? MPH don't like pool hopping from what I've read, you'd forfeit a good portion of your mining shares if you make frequent hops.
For something to ease your spreadsheet work and convert to USD and showing grand total, somebody posted in this thread or some other thread I don't remember, but feel free to try...miningpoolhubstats.com...since you are talking about using MPH
I am using the default settings... Switching interval is 30 minutes... Threshold is unchecked.
However an update:
Suddenly my auto-exchange coin target (ethereum) balance jumped up and now my total looks more correct for the 24 hour period ($~7.00).
They must be using some kind of server farm (NoSQL DB setup perhaps) where depending on which server you are hitting at the time, you see different totals. Then at some point they must consolidate. Really wish they would improve the UI however.
January 10, 2018, 05:41:58 PM
hsrminer support pls
January 10, 2018, 05:36:40 PM
I've been using aswesome miner for some time now, updated to the latest one, maybe I forgot to do something, but I have been trying to not use nicehash as one of the pools to go to. But every time the miner loads up its trying to connect to nicehash, but can't, if I have the selection for nicehash pool it starts up fine and mines on nicehash. I don't want to use nicehash as one of my profit switching pools.
Ah nm, I was forgetting something have to uncheck nicehash pool from in the profit switching menu of options!
Sorry brain fart!
Ah nm, I was forgetting something
have to uncheck nicehash pool from in the profit switching menu of options!Sorry brain fart!
January 10, 2018, 05:28:29 PM
I am having the same issue. I had to make a spreadsheet to add up all the columns in miningpoolhub. Awesome miner shows $6-8.50 as daily earnings but it is closer to around $1.50 - $4.50 depending on what stats you go with (they are constantly jumping back and forth).
The MiningPoolHub interface is very poor and hard to see what you are actually earning. I am not sure why they can't show more consistent stats instead of coins going away and coming back, along with amounts going back and forth as well. They should add something to convert to USD and then show a grand total. Right now I think people are making much less than they think they are.
The MiningPoolHub interface is very poor and hard to see what you are actually earning. I am not sure why they can't show more consistent stats instead of coins going away and coming back, along with amounts going back and forth as well. They should add something to convert to USD and then show a grand total. Right now I think people are making much less than they think they are.
What is your profit switching setting, statistics to 24 hours? Long switch intervals? Switching threshold? MPH don't like pool hopping from what I've read, you'd forfeit a good portion of your mining shares if you make frequent hops.
For something to ease your spreadsheet work and convert to USD and showing grand total, somebody posted in this thread or some other thread I don't remember, but feel free to try...miningpoolhubstats.com...since you are talking about using MPH
January 10, 2018, 02:52:09 PM
I am having the same issue. I had to make a spreadsheet to add up all the columns in miningpoolhub. Awesome miner shows $6-8.50 as daily earnings but it is closer to around $1.50 - $4.50 depending on what stats you go with (they are constantly jumping back and forth).
The MiningPoolHub interface is very poor and hard to see what you are actually earning. I am not sure why they can't show more consistent stats instead of coins going away and coming back, along with amounts going back and forth as well. They should add something to convert to USD and then show a grand total. Right now I think people are making much less than they think they are.
The MiningPoolHub interface is very poor and hard to see what you are actually earning. I am not sure why they can't show more consistent stats instead of coins going away and coming back, along with amounts going back and forth as well. They should add something to convert to USD and then show a grand total. Right now I think people are making much less than they think they are.
January 10, 2018, 02:20:52 PM
I seem to be having the same issue as the previous poster but with only one card. When I go to sleep and wake up the next morning, AM has stopped. After two days of this I realized I could check the log file.
1/10/2018 3:10:01 AM.847 [001] QueryEndSession
1/10/2018 3:10:01 AM.847 [001] LParam: 1073741825
1/10/2018 3:10:01 AM.847 [001] Saving configuration to: C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml.tmp
1/10/2018 3:10:02 AM.019 [001] --> C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml
1/10/2018 3:10:02 AM.019 [001] Request to close Main Window
1/10/2018 3:10:02 AM.019 [001] Request to close Popup Window
1/10/2018 3:10:02 AM.066 [001] EndSession
1/10/2018 3:10:02 AM.066 [001] LParam: 1073741825
1/10/2018 3:10:02 AM.066 [001] CoreContext received event for Shutdown
1/10/2018 3:10:02 AM.066 [001] Shutdown: Save statistics
1/10/2018 3:10:02 AM.066 [001] Shutdown: Save configuration
1/10/2018 3:10:02 AM.066 [001] Saving configuration to: C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml.tmp
1/10/2018 3:10:02 AM.129 [001] --> C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml
1/10/2018 3:10:02 AM.129 [001] Shutting down timer
1/10/2018 3:10:02 AM.129 [001] Exit
Any ideas? I will have to just mine one coin overnight without AM looks like.
1/10/2018 3:10:01 AM.847 [001] QueryEndSession
1/10/2018 3:10:01 AM.847 [001] LParam: 1073741825
1/10/2018 3:10:01 AM.847 [001] Saving configuration to: C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml.tmp
1/10/2018 3:10:02 AM.019 [001] --> C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml
1/10/2018 3:10:02 AM.019 [001] Request to close Main Window
1/10/2018 3:10:02 AM.019 [001] Request to close Popup Window
1/10/2018 3:10:02 AM.066 [001] EndSession
1/10/2018 3:10:02 AM.066 [001] LParam: 1073741825
1/10/2018 3:10:02 AM.066 [001] CoreContext received event for Shutdown
1/10/2018 3:10:02 AM.066 [001] Shutdown: Save statistics
1/10/2018 3:10:02 AM.066 [001] Shutdown: Save configuration
1/10/2018 3:10:02 AM.066 [001] Saving configuration to: C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml.tmp
1/10/2018 3:10:02 AM.129 [001] --> C:\Users\Owner\AppData\Roaming\AwesomeMiner\ConfigData.xml
1/10/2018 3:10:02 AM.129 [001] Shutting down timer
1/10/2018 3:10:02 AM.129 [001] Exit
Any ideas? I will have to just mine one coin overnight without AM looks like.
January 10, 2018, 12:20:09 PM
I've switched the statistics around endlessly to get the "perfect" daily estimate ratio
Not sure what you mean but there is no reason to "switch statistics around". AM is a powerful tool but like all good tools you do actually need to understand how to use it properly.
I would suggest turning off all the profit switching stuff until you figure out how to mine one coin successfully first.
January 10, 2018, 08:18:52 AM
Its official, this app is shit. I've switched the statistics around endlessly to get the "perfect" daily estimate ratio, and it doesnt even get CLOSE to the so said daily estimates I'm suppose to make. Whoever made up these stats when it came to profit switching need to get shot in the face. As per example Skein is suppose to give me $10 for 1080ti on Zpool.. Guess what, IT DOESNT EVEN COME CLOSE!!!
Made less than a dollar in 5 hours, WTF?!?!? What a hunk of shit. Even when mining with coin Specified it still mines whatever the fuck it wants so why even have the option?!
Made less than a dollar in 5 hours, WTF?!?!? What a hunk of shit. Even when mining with coin Specified it still mines whatever the fuck it wants so why even have the option?!
It's pretty accurate for me. User error?
January 10, 2018, 07:51:33 AM
How can I change managed profit switching miners in managed miners?
January 10, 2018, 07:14:46 AM
Hi guys,
Another new Awesome Miner user here, first of all, thanks Patrike for your software!
Got my rig up and running, no problem there, just a question about the ‘balance’ tab, i cant find any info or example to fill in.
I understand that i need to insert a wallet address (duh) but what is used as ‘label’?
My Litecoin address works good, but not my Ethereum and Bitcoin, it shows update failed.
Any help is much appreciated,
Regards from The Netherlands
Welcome and thanks for your nice feedback.Another new Awesome Miner user here, first of all, thanks Patrike for your software!
Got my rig up and running, no problem there, just a question about the ‘balance’ tab, i cant find any info or example to fill in.
I understand that i need to insert a wallet address (duh) but what is used as ‘label’?
My Litecoin address works good, but not my Ethereum and Bitcoin, it shows update failed.
Any help is much appreciated,
Regards from The Netherlands
Label is just a description (maybe I should change name of it) that can be anything. It's useful if you have several addresses and want to remember what they are used for.
Are you using the default Block Explorer API's that are pre-filled in? That should work for Bitcoin and Ethereum unless your Awesome Miner version is too old. If you have any specific address work, you could send it to me via mail or PM and I can take a look. Thanks!
For general information about the balance feature:
http://www.awesomeminer.com/help/coinbalance.aspx
@Patrike: using latest 4.3.2, also using default API`s...still see update failed on both Zclassic and Ethereum, used etherscan.io to get an api but this fails also, did just the same as on Litecoin and that one works like a charm.
January 10, 2018, 05:13:26 AM
Its official, this app is shit. I've switched the statistics around endlessly to get the "perfect" daily estimate ratio, and it doesnt even get CLOSE to the so said daily estimates I'm suppose to make. Whoever made up these stats when it came to profit switching need to get shot in the face. As per example Skein is suppose to give me $10 for 1080ti on Zpool.. Guess what, IT DOESNT EVEN COME CLOSE!!!
Made less than a dollar in 5 hours, WTF?!?!? What a hunk of shit. Even when mining with coin Specified it still mines whatever the fuck it wants so why even have the option?!
Made less than a dollar in 5 hours, WTF?!?!? What a hunk of shit. Even when mining with coin Specified it still mines whatever the fuck it wants so why even have the option?!
This is not fair if there's a misconfiguration issue on your end. I do not own a 1080Ti and can't say for the hashrate, but you are ranting without giving much information on your end, no need for rude language, AM does not mine for you and it does not lie to you if it's been fed with misinformation in the first place.
According to early test of skein hashrate with 1080Ti, it does approx 600MH/s without oc, what is your hashrate and what is pool's reported hashrate? if you plug in into say...WhatToMine, 600 MH/s gives you shy of $7 if you are mining DGB-Skein, and $2.7 per day for XMY-Skein...your 1 dollar in 5 hours seemed though pretty unimpressive for a top of range $1k card but isn't far off the estimates. not to mention a double hit with DGB-BTC pair value drop and BTC-USD value drop....what would you expect?
FYI...my 1060s does more than
Also...why would you be mining skein when supposedly Equihash/Neoscrypt has much higher reported revenue? seems more like wrong recorded hashrate in your profit profile, did you benchmark properly?
January 10, 2018, 04:35:13 AM
Its official, this app is shit. I've switched the statistics around endlessly to get the "perfect" daily estimate ratio, and it doesnt even get CLOSE to the so said daily estimates I'm suppose to make. Whoever made up these stats when it came to profit switching need to get shot in the face. As per example Skein is suppose to give me $10 for 1080ti on Zpool.. Guess what, IT DOESNT EVEN COME CLOSE!!!
Made less than a dollar in 5 hours, WTF?!?!? What a hunk of shit. Even when mining with coin Specified it still mines whatever the fuck it wants so why even have the option?!
Made less than a dollar in 5 hours, WTF?!?!? What a hunk of shit. Even when mining with coin Specified it still mines whatever the fuck it wants so why even have the option?!
January 09, 2018, 05:47:11 PM
Is it possible to add xmr-stak to also support CPU under managed software->compatible software? Now only AMD/Nvidia is accepted. The new xmr-stak has replaced the xmr-stak-cpu, and xmr-stak works great on cpu only (just remove the GPU-dlls). I guess API is the same, so it just to enable it? On latest xeon scalable CPU, it's around 20% faster on cryptonight than any other miner I have tried.
Also could it be an idea to have different switching interval for the different pools? Since MPH use PPLNS, a longer switch time could maybe be more profitable. On Zpool, faster switching could maybe be most profitable? Or maybe I'm totally wrong...
Thanks
Also could it be an idea to have different switching interval for the different pools? Since MPH use PPLNS, a longer switch time could maybe be more profitable. On Zpool, faster switching could maybe be most profitable? Or maybe I'm totally wrong...
Thanks
January 09, 2018, 05:45:09 PM
With the latest update, none of my templates will take on remote rigs. I select a new profile to launch different mining software and they keep only starting the same software.
As an example, I was mining Cryptonite. I then want to switch to ETH. Select a different template for the managed miner and apply it. Software shutsdown and new software starts up. However, the "new" software is the exact same software from the previous profile. I have run the "Upgrade Remote Agent" on the remote rigs.
What am I missing or is this a new bug?
If you open the Properties of this miner after applying the profile - is the information correct? What if you manually stop and then start the miner, is it starting with the correction configuration?As an example, I was mining Cryptonite. I then want to switch to ETH. Select a different template for the managed miner and apply it. Software shutsdown and new software starts up. However, the "new" software is the exact same software from the previous profile. I have run the "Upgrade Remote Agent" on the remote rigs.
What am I missing or is this a new bug?
Can you also manually version on one of the Remote Agents that it's in fact the same version of Awesome Miner. Thanks!
Thank you.
January 09, 2018, 05:32:50 PM
I purchased the standard edition as we're currently running 4 rigs. (6 GPUs each).
The software is behaving very oddly. It is an absolute crapshoot to get all 4 rigs mining at the same time.
Assume I have rigs 1 through 4.
If they're all in a stopped state, I can start rig 1 fine. I then try to start rig 2, and it becomes a random chance that it simply starts mining as well, or will stop rig 1 from mining and start itself and rig 3 mining instead. If I then try to start rig 4 it may just stop all the rigs and start rig 4. Then I can start rig 3 again and suddenly all 4 rigs run. It's always an instantaneous change on the start of another rig.
It seems like any time there is a state change on any rig, there is a non zero chance one or more other rigs will be affected.
Through vigorous start/stopping I can sometimes get all 4 mining but there's no guarantee they'll stay that way as sometimes other rigs will stop when algos are switched or what have you.
Occasionally instead of "stopped" I'll see service offline as a description, but that never seems to last and the machines are still reachable via ping with no packet loss.
I've made sure each machine is on its own reserved ip and everything looks good network wise, does anyone have any ideas as to what I might try to troubleshoot this? I'd sure like to get all 4 rigs mining consistently asap.
Thanks,
-a
The software is behaving very oddly. It is an absolute crapshoot to get all 4 rigs mining at the same time.
Assume I have rigs 1 through 4.
If they're all in a stopped state, I can start rig 1 fine. I then try to start rig 2, and it becomes a random chance that it simply starts mining as well, or will stop rig 1 from mining and start itself and rig 3 mining instead. If I then try to start rig 4 it may just stop all the rigs and start rig 4. Then I can start rig 3 again and suddenly all 4 rigs run. It's always an instantaneous change on the start of another rig.
It seems like any time there is a state change on any rig, there is a non zero chance one or more other rigs will be affected.
Through vigorous start/stopping I can sometimes get all 4 mining but there's no guarantee they'll stay that way as sometimes other rigs will stop when algos are switched or what have you.
Occasionally instead of "stopped" I'll see service offline as a description, but that never seems to last and the machines are still reachable via ping with no packet loss.
I've made sure each machine is on its own reserved ip and everything looks good network wise, does anyone have any ideas as to what I might try to troubleshoot this? I'd sure like to get all 4 rigs mining consistently asap.
Thanks,
-a
I know you have probably done this, but that just seem like some sort of conflict, double make sure in the Options you have
- Ensure each machine running same version AM Remote Agent as your main AM machine
- 4 Managed Hosts ( 1 Per machine, each on their IP )
- 4 Managed Miners ( 1 assigned to each individual Managed Host )
- X number of Profit Profiles for X different GPU Setups ( If using Profit Miners)
- If using any customized software or software/paths, make sure you point them to the individual machine's local executables via "Browse Uploaded Software..." in Profit Profile
- Make sure you benchmarked each individual profiles to ensure they are hashing all the supported algos you checked.
Lastly open up the log folders in Tools -> Log file and try read through and see what kind of errors might have occurred and logged when this happens, errors are entries with "[E]" without the quotes. If still can't be solved manually, best to send the logs to Patrike via email.
"Service Offline" really is just information saying your AM is not able to communicate with the Remote Agent running on the Remote Miner(s) you setup, may it be the Remote Agent crashed, network issue, did not start...machine completely offline + whatever that could happen to cause the interruption...etc.
January 09, 2018, 02:18:41 PM
So just as an fyi to my issue with the paths being wrong etc. I tracked my issue down to my internet service provider blocking the claymore download at their dns level using some kind of dnsbl. Once I switched to googles servers (8.8.8.
the download/updates worked correctly. I still had to delete the files in AM to get it to work. I opened a ticket with my provider but I doubt it will amount to anything
This is where as a previous poster suggested an issue tracker might be nice. It would at least be a central place to look for fixes.
the download/updates worked correctly. I still had to delete the files in AM to get it to work. I opened a ticket with my provider but I doubt it will amount to anythingThis is where as a previous poster suggested an issue tracker might be nice. It would at least be a central place to look for fixes.
January 09, 2018, 02:02:49 PM
@Patrike
Please look at this simple issue tracker / feature request. Can you make one for AM?
I really like how simple it is and this will save a BUNCH of time. It takes a lot of time scrolling through all the BCT posts just find or not find the answer.
https://bitbucket.org/JaymZZZ/miningpoolhubstats/issues
Please look at this simple issue tracker / feature request. Can you make one for AM?
I really like how simple it is and this will save a BUNCH of time. It takes a lot of time scrolling through all the BCT posts just find or not find the answer.
https://bitbucket.org/JaymZZZ/miningpoolhubstats/issues
Jump to: