[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 473.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: bleauhaus on December 27, 2017, 12:58:49 PM

Id Like to volunteer my time to research the needed data to add more coins and pools to AM. i am also willing to host wallets to get realtime Difficulty and block rewards data.

also im not a programmer but i wonder if its possible to run a server that crawls various pools for current hashrate info? maybe python?

Today Awesome Miner uses the following sources for profit information, where WhatToMine is the most popular source for coin profit information:
http://www.awesomeminer.com/help/coinstats.aspx

Once a coin is supported on WhatToMine, it will show up with statistics and profit information in Awesome Miner right away.

If another service is providing information about more or other coins, Awesome Miner could connect to this service API as well.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: bar_1 on December 27, 2017, 11:59:09 AM

Hi, everyone, first message here!!!
I would like to give awesome miner a try....I have AMD and Nvidia GPUS....do i just set up 2 miners?

Hi and welcome!
Yes. However, if you do profit switching, you should either disable Claymore Ethereum Miner or configure it to only run on either AMD or nVidia. This is the only mining software that runs both on AMD and nVidia at the same time. You can disable mining software from a profile via Options dialog, Profit profile section

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: xxxmisko on December 27, 2017, 10:29:02 AM

Quote from: patrike on December 27, 2017, 07:23:54 AM

Quote from: xxxmisko on December 27, 2017, 03:40:57 AM

Hello,

is there any way how to add algorithm "yescrypt" ?
I have got ccminer with support of this algo (not included in a/m), but i am not able to learn awesome miner to use this external library.

Thanks for all folks

Please see this guide:
http://www.awesomeminer.com/help/addalgorithm.aspx

thanks, but this is guide how to add new algo into a/m. But i need to add new software-miner. This option is missing.Thanks

Did you try to add a new Managed Software for this in the Options dialog? Although the guide show how to modify an existing software like ccminer, on the same page in the user interface you can also add your own ccminer as "User defined Managed Software".

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: s3c70r on December 27, 2017, 02:30:47 PM

Quote from: s3c70r on December 26, 2017, 01:42:28 AM

Region variable does not get passed... Had to add us-east manually to be able to connect.

https://preview.ibb.co/b6htc6/zcoin.png

Will this be fixed in next release ?

Also, Unspecified Lyra2z doesn't show any income.

I can see the value in online services and in the profit details but no value in the coin column of miners.

I assume you have defined an algorithm called "Lyra2z" as well?

What I'm planning to do is actually to make this algorithm and a several more included by default. I can also look at if region support can be added for for custom Online Services. I will try to make this into the next release.

Thanks for your feedback on this.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ComputerNerd972 on December 27, 2017, 10:48:06 AM

Hello everyone. I'm looking for a little help setting up AM Remote Agent.

I have AE running on one computer and downloaded the remote agent on another. I also have opened port 9630 on both windows firewalls and my router firewall, however, I'm still getting this error:

"Awesome Miner Remote Agent failed to listen on port '9630'.

I would appreciate any help.Thank you!

Is any other application using that port? Also make sure you didn't install the Windows Service (Remote Service) on the computer. You can try to change port via the Remote Agent configuration tool:
http://www.awesomeminer.com/help/remoteagent.aspx

s3c70r

member

Activity: 83

Merit: 10

Quote from: s3c70r on December 26, 2017, 01:42:28 AM

Region variable does not get passed... Had to add us-east manually to be able to connect.

https://preview.ibb.co/b6htc6/zcoin.png

Will this be fixed in next release ?

Also, Unspecified Lyra2z doesn't show any income.

I can see the value in online services and in the profit details but no value in the coin column of miners.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: poby on December 27, 2017, 07:52:24 AM

If the rig loses power and restarts 5 minutes later, by that time AM has given up trying to restart the miner. Is there any way to have it periodically check for a connection and if one is found, to start the miner? I thought it would do this but it doesn't seem to. If the rig has been offline for a few minutes, it doesn't start up the miner.

If the rig reboots - can you configure the miner to Auto start instead? You will find this setting in the Properties of the miner.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: robl450 on December 27, 2017, 07:50:34 AM

Trying to test this out. Is there a way to add Ahashpool and is it automatic or do you need to add every coin individually? Also how to add X17 algorithm?

AHashPool is predefined with at least the 10 most popular algorithms. You can also add your own via Options dialog, Online Services if needed.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: WitWolfy on December 27, 2017, 07:54:31 AM

Yescrypt just hangs by the auto block algorithms the whole time. It never really begins mining. Is this pool not made for Nvidia GPUs?

I was looking at the ccminer 2.2.3 readme for yescrypt, but couldn't find any indication that it was supported.

For CpuMiner-Opt I've been able to successfully do yescrypt mining.

Maybe someone else knows if any special fork on ccminer is required for this?

s3c70r

member

Activity: 83

Merit: 10

Quote from: puwaha on December 26, 2017, 06:49:22 PM

Quote from: NetfetMiningCompany on December 24, 2017, 06:04:06 PM

For profit switching on Zpool.

I see you can add c=BTC and take it away, but is there a way to change the c= to any other coin? The post says pool side but I dont see how to do that pool side, and I also can't set the c= in a password field in the profit profile.

Make sure in the Options on the Profit Switching section the "Select BTC payout (c=BTC) for zpool.." is not ticked. Then on your managed profit miner, use the command line parameters put in the

-p C=XXX

where the XXX is the code of the coin you wanted Zpool to convert to.

Does this also works ?

https://preview.ibb.co/nPzFsG/1.png

https://image.ibb.co/d4xPmb/2.png

edit

Oh I see, I had to put C=BCH

cashen

sr. member

Activity: 434

Merit: 251

Quote from: puwaha on December 26, 2017, 06:49:22 PM

Quote from: NetfetMiningCompany on December 24, 2017, 06:04:06 PM

For profit switching on Zpool.

I see you can add c=BTC and take it away, but is there a way to change the c= to any other coin? The post says pool side but I dont see how to do that pool side, and I also can't set the c= in a password field in the profit profile.

Make sure in the Options on the Profit Switching section the "Select BTC payout (c=BTC) for zpool.." is not ticked. Then on your managed profit miner, use the command line parameters put in the

-p C=XXX

where the XXX is the code of the coin you wanted Zpool to convert to.

I like this one. This one should be right on the main miner view. Or a right click, but should be easy to get to.

"HOLD current pool for X minutes"

bensam1231

legendary

Activity: 1764

Merit: 1024

Bumping this, some of my miners have a couple GB worth of logs (6GB on one) in them in the AM service local directory. This isn't a big deal if you have a big HD, but a lot of my miners don't.

Quote from: bensam1231 on December 21, 2017, 10:45:05 PM

There needs to be a way to limit the amount of logs or the total size of logs the AM service creates. I've had certain miners with GB worth of logs that I have to manually delete. Please add this ASAP.

VicePrez

newbie

Activity: 7

Merit: 0

@Patrike,

Not sure if this was answered before, but does Awesome Miner factor in algo fees when Profit Switching between Online Services? If not, would you recommend adjusting the Profit Factor per algo to reflect their respective fees?

SpriterQC

newbie

Activity: 29

Merit: 0

I'd like to run Awesome Miner on my Window maching but run remote machine on Ubuntu with only ccminer. Can Awesome Miner remote control and do profit base algo switching like it can do on windows remote machine? Any article post on that topic I am interested in reviewing.

Thanks

bleauhaus

newbie

Activity: 76

Merit: 0

Id Like to volunteer my time to research the needed data to add more coins and pools to AM. i am also willing to host wallets to get realtime Difficulty and block rewards data.

also im not a programmer but i wonder if its possible to run a server that crawls various pools for current hashrate info? maybe python?

bar_1

newbie

Activity: 5

Merit: 0

Hi, everyone, first message here!!!
I would like to give awesome miner a try....I have AMD and Nvidia GPUS....do i just set up 2 miners?

WitWolfy

newbie

Activity: 25

Merit: 0

I'm going to ask somebody to help me if possible through teamviewer to get me pass the Firewall and Anti Virus BS on Windows 10. Every time I wanna mine with CPU I always hit a brick wall with pool like Yescrypt ect ect.

Much appreciated.

BCCrypto68

newbie

Activity: 27

Merit: 0

Just wanted to give a big thumps up to this app and the developer. The app has been very useful for me (and my needs for TMI and control), and any issues or questions I've had Patrike has been great to help me through.... even when at least one of them turned out to be 'stupid end user tricks'.

Even if you're a small miner I think this app is well worth even the $ for the standard edition (so go buy it). I got the Premium edition, because I have needs and they are semi-well documented, and wanted some additional functionality - I consider it money well spent.

WitWolfy

newbie

Activity: 25

Merit: 0

Quote from: xxxmisko on December 27, 2017, 10:29:02 AM

Quote from: patrike on December 27, 2017, 07:23:54 AM

Quote from: xxxmisko on December 27, 2017, 03:40:57 AM

Hello,

is there any way how to add algorithm "yescrypt" ?
I have got ccminer with support of this algo (not included in a/m), but i am not able to learn awesome miner to use this external library.

Thanks for all folks

Please see this guide:
http://www.awesomeminer.com/help/addalgorithm.aspx

thanks, but this is guide how to add new algo into a/m. But i need to add new software-miner. This option is missing.Thanks

the guide does exactly as you asked becuase I wanted to ask the same thing but doesnt work though. My GTX 1080 Ti just stands idle the whole freaking time.

ComputerNerd972

newbie

Activity: 5

Merit: 0

Hello everyone. I'm looking for a little help setting up AM Remote Agent.

I have AE running on one computer and downloaded the remote agent on another. I also have opened port 9630 on both windows firewalls and my router firewall, however, I'm still getting this error:

"Awesome Miner Remote Agent failed to listen on port '9630'.

I would appreciate any help.Thank you!

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 473. (Read 703446 times)